Poulan SP24H48YT manual Assembly/Pre-Operation, Tools Required for Assembly

Page 8

ASSEMBLY/PRE-OPERATION

Your new tractor has been assembled at the factory with the exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness. Review the video cassette before you begin.

TOOLS REQUIRED FOR ASSEMBLY

A socket wrench set will make assembly easier. Standard wrench sizes you need are listed below.

(1)

3/4" wrench

(1)

Pliers

(1)

9/16" wrench

(1)

Utility knife

(1)

Tire pressure

gauge

 

When right or left hand is mentioned in this manual, it means, from your point of view, when you are in the operating posi- tion (seated behind the steering wheel).

TO REMOVE TRACTOR FROM CARTON

UNPACK CARTON

1.Remove all accessible loose parts and parts boxes from carton.

2.Cut along dotted lines on all four pan- els of carton. Remove end panels and lay side panels flat.

3.Remove mower and packing materials.

4.Check for any additional loose parts or cartons and remove.

BEFORE REMOVING TRACTOR FROM SKID

ATTACH STEERING WHEEL

1.Remove locknut and large flat washer from steering shaft.

2.Position front wheels of the tractor so they are pointing straight forward.

3.Slide the steering sleeve over the steering shaft.

4.Position steering wheel so cross bars are horizontal (left to right) and slide onto steering wheel adapter.

5.Secure steering wheel to steering shaft with locknut and large flat washer previously removed. Tighten securely.

6.Snap steering wheel insert into center of steering wheel.

7.Remove protective materials from trac- tor hood and grill.

IMPORTANT: Check for and remove any staples in skid that may puncture tires where tractor is to roll off skid.

 

Steering Wheel

 

Insert

 

 

Lock Nut

 

Large Flat

 

Washer

Steering Wheel

 

 

 

Steering

Steering

Wheel

Adaptor

Shaft

 

 

Steering

 

 

Sleeve

 

 

 

 

8

 

81

 

02

 

CHECK BATTERY

1. Lift hood to raised position.

NOTE: If this battery is put into service after month and year indicated on label (label located between terminals) charge battery for minimum of one hour at 6-10 amps. (See "BATTERY" in Maintenance section of this manual for charging instruc- tions).

Label

02173

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Operators Manual Table of Contents WarrantySafety Rules General OperationService Safe Handling of Gasoline II. Slope OperationIII. Children IV. TowingGeneral Service API-SG-SL Product SpecificationsCustomer Responsibilities Unassembled Parts Gauge Wheels Nose RollerASSEMBLY/PRE-OPERATION Tools Required for AssemblyTo Remove Tractor from Carton Before Removing Tractor from SkidInstall Seat To Attach Nose Roller Assemble Gauge Wheels to Mower DeckInstall Mower and Drive Belt Checklist Check Tire PressureCheck Deck Levelness Check for Proper Position of ALL BeltsOperation Know Your Tractor HOW to USE Your Tractor To USE Choke ControlTo Adjust Mower Cutting Height To Adjust Gauge WheelsTo Operate Mower Reverse Operation System ROSBefore Starting the Engine To Operate on HillsTo Transport Towing Carts and Other ATTACH- MentsTo Start Engine ADD GasolinePurge Transmission Mowing Tips Maintenance Lubrication ChartGeneral Recommendations Before Each USETractor Engine Cleaning AIR FilterTo Remove Mower Service and AdjustmentsTo Install Mower To Level Mower Housing SIDE-TO-SIDE AdjustmentMower Drive Belt Removal Mower Drive Belt InstallationTo Replace Mower Drive Belt Install NEW Mower Blade Secondary Drive Belt To Replace Mower Blade SEC- Ondary Drive BeltRemove Mower Drive Belt Remove Mower Blade Secondary Drive BeltTo Check and Adjust Brake To Adjust BrakeBelt Installation To Check BrakeTransmission Removal Replacement To Adjust Steering Wheel ALIGN- MentFront Wheel TOE-IN/CAMBER To Remove Wheel for RepairsReplacing Battery To Adjust Throttle Control CableTo Adjust Carburetor To Replace Headlight BulbOther BatteryStorage Troubleshooting Chart Problem Cause CorrectionExcessive Poor grass Suggested Guide for Sighting Slopes for Safe Operation

SP24H48YT specifications

The Poulan SP24H48YT is a powerful and versatile lawn tractor designed to meet the needs of homeowners and gardeners who seek an efficient and reliable machine for maintaining their landscapes. With its robust build and user-friendly features, this model aims to simplify lawn care while delivering exceptional performance.

One of the standout features of the Poulan SP24H48YT is its 24 HP Briggs & Stratton engine. This engine provides ample power for cutting through thick grass and tackling tough terrains. The auto transmission allows for smooth and effortless operation, enabling users to “set it and forget it” when it comes to handling different terrains while ensuring a consistent and even cut.

The 48-inch cutting deck is made from high-quality materials, ensuring durability and longevity. The deck is equipped with a mulching capability, which allows grass clippings to be finely cut and returned to the lawn, promoting healthier growth. Users can also adjust the cutting height with ease, offering a range of height settings to achieve the precise look and feel desired for their lawns.

For added convenience, the Poulan SP24H48YT features an easy-to-use dashboard with controls that are intuitive and ergonomic. The steering wheel is designed for comfort, reducing fatigue during long mowing sessions. The high-back seat also adds to the overall comfort, allowing operators to mow for extended periods without discomfort.

This model is built with user-centric technologies such as LED headlights, ensuring visibility during early morning or late evening mowing sessions. Additionally, the reinforced frame and wheels enhance stability and maneuverability, making it easy to navigate around flower beds and obstacles in the yard.

Maintenance is also simplified, as the Poulan SP24H48YT includes an easily accessible oil drain and an air filter that is simple to clean or replace. The machine’s rugged construction is designed to withstand the rigors of regular use, promising years of dependable service.

In summary, the Poulan SP24H48YT lawn tractor combines power, precision, and ease of use in a single package. Its advanced engine, adjustable cutting deck, comfortable design, and thoughtful features make it an excellent choice for homeowners looking to achieve a manicured lawn with minimal effort. Whether for routine mowing or more extensive landscaping tasks, this lawn tractor stands out as a reliable companion in outdoor maintenance.
Top Page Image Contents