Poulan SP24H48YT manual Install Seat

Page 9

INSTALL SEAT

Adjust seat before tightening adjustment knob.

1.Remove adjustment knob and flat washer securing seat to cardboard packing and set aside for assembly of seat to tractor.

2.Pivot seat upward and remove from the cardboard packing. Remove the cardboard packing and discard.

3.Place seat on seat pan so head of shoulder bolts are positioned over the large slotted holes in pan.

4.Push down on seat to engage shoulder bolts in slots and pull seat towards rear of tractor.

5.Pivot seat and pan forward and as- semble adjustment knob and flat washer loosely. Do not tighten.

6.Lower seat into operating position and sit in seat.

7.Slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down.

8.Get off seat without moving its ad- justed position.

9.Raise seat and tighten adjustment knob securely.

Seat

Seat Pan

Shoulder

Bolts

Flat Washer

02615

Adjustment Knob

NOTE: You may now roll or drive your tractor off the skid. Follow the appropriate instruction below to remove the tractor from the skid.

TO ROLL TRACTOR OFF SKID (See Operation section for location and function of controls)

1.Press lift lever plunger and raise attachment lift lever to its highest position.

2.Release parking brake by depressing clutch/brake pedal.

3.Place freewheel control in "trans- mission disengaged position" (See “TO TRANSPORT” in the Operation section of this manual).

4.Roll tractor forward off skid.

TO DRIVE TRACTOR OFF SKID (See Operation section for location and function of controls)

WARNING: Before starting, read, un- derstand and follow all instructions in the Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other people and objects.

1.Be sure all the above assembly steps have been completed.

2.Check engine oil level and fill fuel tank with gasoline.

3.Place freewheel control in "trans- mission engaged" position (see "TO TRANSPORT" in Operation section of this manual).

4.Sit on seat in operating position, depress clutch/brake pedal and set the parking brake.

5.Place motion control lever in neutral

(N)position.

6.Press lift lever plunger and raise attachment lift lever to its highest posi- tion.

7.Start the engine. After engine has started, move throttle control to idle position.

8.Release parking brake.

9.Slowly move the motion control lever forward and slowly drive tractor off skid.

10.Apply brake to stop tractor, set parking brake and place motion control lever in neutral position.

11.Turn ignition key to "STOP" position. Continue with the instructions that follow.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Operators Manual Warranty Table of ContentsGeneral Operation Safety RulesII. Slope Operation Service Safe Handling of GasolineIII. Children IV. TowingGeneral Service Product Specifications Customer ResponsibilitiesAPI-SG-SL Gauge Wheels Nose Roller Unassembled PartsTools Required for Assembly ASSEMBLY/PRE-OPERATIONTo Remove Tractor from Carton Before Removing Tractor from SkidInstall Seat Assemble Gauge Wheels to Mower Deck To Attach Nose RollerInstall Mower and Drive Belt Check Tire Pressure ChecklistCheck Deck Levelness Check for Proper Position of ALL BeltsOperation Know Your Tractor To USE Choke Control HOW to USE Your TractorTo Adjust Gauge Wheels To Adjust Mower Cutting HeightTo Operate Mower Reverse Operation System ROSTo Operate on Hills Before Starting the EngineTo Transport Towing Carts and Other ATTACH- MentsADD Gasoline To Start EnginePurge Transmission Mowing Tips Lubrication Chart MaintenanceGeneral Recommendations Before Each USETractor Engine AIR Filter CleaningService and Adjustments To Install MowerTo Remove Mower SIDE-TO-SIDE Adjustment To Level Mower HousingMower Drive Belt Installation To Replace Mower Drive BeltMower Drive Belt Removal To Replace Mower Blade SEC- Ondary Drive Belt Install NEW Mower Blade Secondary Drive BeltRemove Mower Drive Belt Remove Mower Blade Secondary Drive BeltTo Adjust Brake To Check and Adjust BrakeBelt Installation To Check BrakeTo Adjust Steering Wheel ALIGN- Ment Transmission Removal ReplacementFront Wheel TOE-IN/CAMBER To Remove Wheel for RepairsTo Adjust Throttle Control Cable Replacing BatteryTo Adjust Carburetor To Replace Headlight BulbBattery StorageOther Problem Cause Correction Troubleshooting ChartExcessive Poor grass Suggested Guide for Sighting Slopes for Safe Operation

SP24H48YT specifications

The Poulan SP24H48YT is a powerful and versatile lawn tractor designed to meet the needs of homeowners and gardeners who seek an efficient and reliable machine for maintaining their landscapes. With its robust build and user-friendly features, this model aims to simplify lawn care while delivering exceptional performance.

One of the standout features of the Poulan SP24H48YT is its 24 HP Briggs & Stratton engine. This engine provides ample power for cutting through thick grass and tackling tough terrains. The auto transmission allows for smooth and effortless operation, enabling users to “set it and forget it” when it comes to handling different terrains while ensuring a consistent and even cut.

The 48-inch cutting deck is made from high-quality materials, ensuring durability and longevity. The deck is equipped with a mulching capability, which allows grass clippings to be finely cut and returned to the lawn, promoting healthier growth. Users can also adjust the cutting height with ease, offering a range of height settings to achieve the precise look and feel desired for their lawns.

For added convenience, the Poulan SP24H48YT features an easy-to-use dashboard with controls that are intuitive and ergonomic. The steering wheel is designed for comfort, reducing fatigue during long mowing sessions. The high-back seat also adds to the overall comfort, allowing operators to mow for extended periods without discomfort.

This model is built with user-centric technologies such as LED headlights, ensuring visibility during early morning or late evening mowing sessions. Additionally, the reinforced frame and wheels enhance stability and maneuverability, making it easy to navigate around flower beds and obstacles in the yard.

Maintenance is also simplified, as the Poulan SP24H48YT includes an easily accessible oil drain and an air filter that is simple to clean or replace. The machine’s rugged construction is designed to withstand the rigors of regular use, promising years of dependable service.

In summary, the Poulan SP24H48YT lawn tractor combines power, precision, and ease of use in a single package. Its advanced engine, adjustable cutting deck, comfortable design, and thoughtful features make it an excellent choice for homeowners looking to achieve a manicured lawn with minimal effort. Whether for routine mowing or more extensive landscaping tasks, this lawn tractor stands out as a reliable companion in outdoor maintenance.
Top Page Image Contents