Hitachi DV-S522U Conventional TV Connections, Important Information, Using Monitor OUT Video jack

Conventional TV Connections	Important Information:
	To connect the unit to a TV, TV must have a Video input jack
Using MONITOR OUT VIDEO jack	(RCA-type) at least. You cannot connect it to an antenna
Connect the Video cable with yellow connectors (supplied)	terminal of TV.

between the MONITOR OUT VIDEO jack of the unit and the VIDEO INPUT jack on the TV.

To MONITOR OUT VIDEO (Yellow)

Video cable (supplied)

ANT	VIDEO 1		VIDEO 2	COMPONENT	VIDEO OUT SELECT	MONITOR OUT
	VIDEO IN	VIDEO OUT	VIDEO IN	VIDEO OUT	(DVD ONLY)	S-VIDEO	VIDEO
						(DVD ONLY)
FM				Y
75Ω					COMPONENT S-VIDEO
	AUDIO IN	AUDIO OUT	AUDIO IN	CB/PB
AM		L	L
LOOP				CR/PR	VIDEO OUT
					SCAN SELECT
		R	R		SELECTABLE INTERLACE

R L

FRONT

				S-VIDEO IN 1
				AUDIO
				OUTPUT
			AUDIO R-AUDIO-L VIDEO
			VIDEO	L
			INPUT
			1
			AUDIO
			VIDEO	R
CENTER	R	L SUB WOOFER
	SURROUND		INPUT	R-AUDIO-L VIDEO
SPEAKERS 8Ω			2

To VIDEO INPUT

ENGLISH

Partial back panel

Notes:

•Please refer to the instruction manual of your TV.

•When you connect the unit to your TV, be sure to turn off the power and disconnect both units from the wall outlet until all the connections have been made.

•Do not connect the MONITOR OUT (S-VIDEO/VIDEO) and COMPONENT VIDEO OUT jacks of the unit to a VCR directly. The playback picture will be distorted because DVD video discs are copy protected.

TV's back panel

Using COMPONENT VIDEO OUT jacks Note:

Please follow the steps before turn on the power.

Using MONITOR OUT S-VIDEO jack

Note:

Please follow the steps before turn on the power.

1.If your TV has the S-VIDEO INPUT jack, connect the *Super-Video cable (not supplied) between the MONITOR OUT S-VIDEO jack of the unit and the S-VIDEO INPUT jack of the TV. (The MONITOR VIDEO OUT jack connection is not necessary.)

You can enjoy clearer picture playback.

2.Set the VIDEO OUT SELECT switch to the S-VIDEOposition.

Partial back panel			TV with S-VIDEO INPUT jack
VIDEO OUT SELECT	MONITOR OUT					S-VIDEO IN 1
(DVD ONLY)	S-VIDEO VIDEO
	(DVD ONLY)						AUDIO
COMPONENT S-VIDEO							OUTPUT
	2				AUDIO R-AUDIO-L VIDEO
					VIDEO		L
					INPUT
VIDEO OUT					1
SCAN SELECT					AUDIO
SELECTABLE INTERLACE
					VIDEO		R
	R L	CENTER	R	L SUB WOOFER
	FRONT		SURROUND		INPUT	R-AUDIO-L	VIDEO
		SPEAKERS 8Ω			2
		1

*Super-Video cable (not supplied)

*Please consult your local audio/video dealer.

1.If your TV has the COMPONENT VIDEO INPUT jacks, connect the *Component Video cable (not supplied) between the COMPONENT VIDEO OUT jacks of the unit and the COMPONENT VIDEO INPUT jacks of the TV.

(The MONITOR VIDEO OUT or S-VIDEO OUT jack connection is not necessary.)

You can enjoy high quality picture playback.

2.Set the VIDEO OUT SELECT switch to the COMPONENT position.

3.Set the VIDEO OUT SCAN SELECT switch to the INTERLACE position.

		Partial back panel			TV with COMPONENT
					VIDEO INPUT jacks
VIDEO 1	VIDEO 2	COMPONENT	VIDEO OUT SELECT	MONITOR OUT
		VIDEO OUT
VIDEO IN VIDEO OUT VIDEO IN			(DVD ONLY) S-VIDEO		VIDEO
Green				(DVD ONLY)
		Y
			COMPONENT S-VIDEO		COMPONENT VIDEO INPUT
		CB/PB		2
L	L				Y		CB	CR
AUDIO IN AUDIO OUT AUDIO IN
		CR/PR	VIDEO OUT
			SCAN SELECT
R	R		SELECTABLE INTERLACE
	Blue			3	R L	CENTER	R	L SUB WOOFER
					FRONT		SURROUND
						SPEAKERS 8Ω
							Blue
	Red			Green				Red

1

*Component Video cable (not supplied)

*Please consult your local audio/video dealer.

Note:

When watching VCR, you must connect the Video cable between the MONITOR OUT VIDEO jack of the unit and the VIDEO INPUT jack of the TV. There are no VCR video signals from S-VIDEO OUT and COMPONENT VIDEO OUT jacks of the unit.

-E10-