Inserting batteries, Important Note | Hitachi DV-S522U specification

Inserting batteries

Two "AA" batteries (supplied)

NOTE:

Remove the batteries if the remote control is not to be used for a month or more. Batteries left in the unit may leak and cause damage.

IMPORTANT NOTE:

SPENT OR DISCHARGED BATTERIES MUST BE RECYCLED OR DISPOSED OF PROPERLY IN COMPLIANCE WITH ALL APPLICABLE LAWS.

FOR DETAILED INFORMATION, CONTACT YOUR LOCAL COUNTY SOLID WASTE AUTHORITY.

Remote control range

Remote sensor

POWER/STANDBY		FM MODE	VOLUME
		FM MODE	VOLUME
qOPEN/	a	k	n
CLOSE	a	k	n
f /TUNE - e /TUNE + d /PRESET			c /MEMO
PHONES
SURROUND	BASS	SOUND	SOURCE

Within approx. 20 feet
(7 meters)	30°	30°
	30°	30°

ENTER

ENU

To set the remote control code for the Hitachi TV

This remote control can operate the basic function of TVs. Follow the steps below to enter the remote control code for the Hitachi TV.

1.While holding down [TV POWER], enter the 2-digit code [0] and [2], then release [TV POWER].

• The remote control is now set to operate the Hitachi TV.

IMPORTANT NOTE:

If the batteries in the remote control are changed, the code settings for the TV must be re-entered.

To set the remote control code for the other TVs

This remote control can operate the basic functions of TVs made by the manufacturers listed below.

To enter the remote control code for your brand of TV, follow the steps below.

1.In the chart below, find the code corresponding to your brand of TV .

2.While holding down [TV POWER], enter the 2-digit code using the number buttons [0 - 9], then release [TV POWER].

• The remote control is now set to operate your TV.

TV brands	Code

ADMIRAL	05,	10, 13
EMERSON	17
FISHER	03
GE	07
GOLD STAR	01
JVC	15
MAGNAVOX	08
MATSUSHITA	12,	18
MITSUBISHI	14
PANASONIC	12,	18
QUASAR	12,	18
RCA	06
SAMSUNG	16
SANYO	03
SHARP	00,	13
SONY	11
TECHNOL ACE	05
TOSHIBA	04
ZENITH	09,	10

Notes:

•Only remote-controlled TVs can be operated using this remote control. (Refer to your TV instruction manual for more details.)

•There may be some older TV models that cannot be operated with this remote control. If this is the case, use the original remote control supplied with the TV.

IMPORTANT NOTE:

If the batteries in the remote control are changed, the code settings for the TV must be re-entered.

Write your code number below for future reference.

TV:

Notes on using the Joy-stick

The Joy-stick has five functions depending on the direction it is moved.

Press straight down: ENTER
Tilt towards the front: 4
Tilt towards the right: a	ENTER
Tilt towards the back: 5
Tilt towards the left: b

Note: Control the stick using your thumb.

ENGLISH

-E6-