Poulan PP4620AVL Limbing and Pruning Important Points, Erly, ING Without a Support

Page 13

1st Cut

2nd Cut

Using a support stand

2nd Cut

1st Cut

Using a support stand 1st Cut

2nd Cut

LIMBING AND PRUNING

WARNING: Be alert for and guard against kickback. Do not allow the moving chain to contact any other branches or ob- jects at the nose of the guide bar when limb- ing or pruning. Allowing such contact can re- sult in serious injury.

WARNING: Never climb into a tree to limb or prune. Do not stand on ladders, platforms, a log, or in any position which can cause you to lose your balance or control of the saw.

IMPORTANT POINTS

S Work slowly, keeping both hands firmly gripped on the saw. Maintain secure foot- ing and balance.

SWatch out for springpoles. Use extreme caution when cutting small size limbs. Slender material may catch the saw chain and be whipped toward you or pull you off balance.

S Be alert for springback. Watch out for branches that are bent or under pressure. Avoid being struck by the branch or the saw when the tension in the wood fibers is released.

SKeep a clear work area. Frequently clear branches out of the way to avoid tripping over them.

LIMBING

SAlways limb a tree after it is cut down. Only then can limbing be done safely and prop-

erly.

S Leave the larger limbs underneath the felled tree to support the tree as you work.

SStart at the base of the felled tree and work toward the top, cutting branches and

limbs. Remove small limbs with one cut.

SKeep the tree between you and the chain. Cut from the side of the tree opposite the branch you are cutting.

SRemove larger, supporting branches with the cutting techniques described in BUCK-

ING WITHOUT A SUPPORT.

SAlways use an overcut to cut small and freely hanging limbs. Undercutting could cause limbs to fall and pinch the saw.

PRUNING

WARNING: Limit pruning to limbs shoulder height or below. Do not cut if branches are higher than your shoulder. Get a professional to do the job.

SMake your fist cut 1/3 of the way through the bottom of the limb.

SNext make a 2nd cut all the way through the limb. Then cut a third overcut leaving a 1 to 2 inch collar from the truck of the tree.

Second cut

Third cut

Collar

First cut

Pruning technique

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents PP4620AVL Plan Ahead Starting ReminderMaintain Your SAW in Good Working Order Operate Your SAW SafelyHandle Fuel with Caution KickbackReduce the Chance of Kickback Maintain ControlDo not cut more than one log at a time Elbow locked Thumb on underside of handlebarChain Brake and CKA Angle Kickback Safety FeaturesComputed kickback angle CKA Table AssemblyAttaching the BAR & Chain If not Checking the tension Adjusting the tensionOperation Starting Fueling & LubricationFueling Engine BAR and Chain LubricationStarting a Warm Engine Cutting MethodsChain Brake Important PointsFelling Large Trees Tree Felling TechniquesNotch CUT and Felling the Tree VanceCutting a Fallen Tree Bucking Using a LOG or Support StandTypes of Cutting Used for Bucking Bucking Without a SupportLimbing Limbing and Pruning Important PointsPruning ErlyCleaning the air filter ServiceCleaning the Spark Arresting Screen AIR FilterStorage Need Service PART? Troubleshooting TableNeed ASSISTANCE? Trouble Cause RemedyLigations The U. S. Environmental Limited WarrantyElectrolux Home PRODUCTS, INC NANCE, Replacement and Repair of Emission Related Parts Any

PP4620AVL specifications

The Poulan PP4620AVL is a powerful and versatile chainsaw designed for both homeowners and professionals who require a reliable tool for various cutting tasks. This model features a 46cc gas engine that delivers ample power to tackle a range of jobs, from light trimming to more demanding tree-felling applications.

One of the standout features of the Poulan PP4620AVL is its advanced air filtration system. This technology enhances engine durability and performance by ensuring that the engine is protected from dust and debris, prolonging its lifespan and maintaining optimal performance. The system is designed to be maintenance-free for a long duration, providing users with peace of mind during operation.

The PP4620AVL is equipped with a tool-free chain tensioning system, which allows for easy adjustments without the need for additional tools. This feature is particularly convenient for users who may need to make quick adjustments while working, ensuring minimal downtime. The chainsaw also has an automatic oiling system that lubricates the bar and chain during use, helping to reduce friction and wear for improved cutting efficiency.

Another impressive aspect of this chainsaw is its lightweight design. Weighing in at a manageable 11 pounds, the PP4620AVL is easy to handle for extended periods, reducing user fatigue while providing the necessary power to complete various tasks. The soft-grip handle adds comfort, allowing for improved control and maneuverability.

Safety is also a priority with the Poulan PP4620AVL. It features a chain brake system that stops the chain quickly in the event of kickback, providing an added layer of protection for the user. Additionally, the chainsaw is designed with an easy-to-access on/off switch and a throttle lockout, ensuring safe operation.

In terms of cutting power, the Poulan PP4620AVL comes with a 20-inch bar, making it suitable for cutting large logs and branches. The combination of the robust engine, efficient cutting system, and user-friendly features make this chainsaw a great choice for anyone from casual users to professionals seeking reliability and efficiency in their cutting tool. With the right maintenance, the PP4620AVL is sure to provide years of service for a wide range of cutting tasks.
Top Page Image Contents