Setup Operation

How to Use the Remote to Control your External Devices

OPERATING THE PRECODED FUNCTIONS FOR YOUR EXTERNAL DEVICES.

The new remote control is designed to operate different types of VCRs, cable boxes, set-top-boxes, satellite receivers, DVD players, and other audio/video equipment. You must first program the remote to match the remote system of your external equipment (refer to pages 23 ~ 24 for precodes).

EXTERNAL DEVICE CONTROL SETUP PROCEDURE

1.Turn on your external device.

2.Select the desired device mode DVD, PVR/VCR, SAT/CBL or AVR by pressing the corresponding device button.

3.Hold down the device button (DVD, PVR/VCR, SAT/CBL or AVR) on the remote and enter the four digit preset code that matches your device as shown on pages 23 ~ 24 .

4.Release the device button.

5.If done correctly, the device LED indicator will blink 3 times to confirm proper setup.

6.The remote will now control the desired device.

SETUP EXAMPLE (Hitachi Cable Box with precode 0003)

1.Turn ON your Cable box.

2.Select Cable mode by using your SAT/CBL button to position the LED indicator on SAT/CBL.

3.Hold down the SAT/CBL button on the remote and press the numbers 0, 0, 0 and 3.

4.Release the SAT/CBL button.

5.The indicator light will flash 3 times if the code was accepted.

6.Aim the remote at the cable box and press the POWER button. The remote will turn off your cable box when the correct four digit preset code is entered. When this occurs, the remote control is programmed for your cable box. If the cable box does not turn off, try a different four digit preset code.

7.The remote will now control your Cable box.

Repeat the same procedure for your set-top-box or satellite receiver (select SAT/CBL), your DVD (select DVD), your VCR/PVR(select VCR/PVR), or your AVR (select AVR).

NOTE

Power button

Device buttons

Numeric buttons

Remote Control Backlight Feature

When you press any remote control button, the buttons will light up. The illumination will light a few seconds during this time. The buttons will appear to light if the

room is dark.

Disabling Remote Control Backlight Feature

1.Place the RC in TV mode.

2.Press and HOLD the TV mode key.

3.While holding the TV mode key enter ASPECT, MUTE in sequence.

4.To re-enable the backlight feature do steps 1~3 again (these steps toggle the Backlight Feature on and off, default is ON).

If your external device cannot be operated after performing the above procedures, your external device code has not been precoded into the remote.

In the unlikely event that your external device cannot be operated after performing the above procedures, please consult your external device operating guide.

The remote control will remember the codes you have programmed even after the batteries are removed from the remote control. To reset all programmed codes to factory default place remote control in TV mode, then press and hold TV mode key and enter “9”, “8”, “1” in sequence.

Depending of your UT Monitor model your remote control could have or not Backlight function.

AVC01U specifications

The Hitachi AVC01U is a cutting-edge device that exemplifies innovation in the realm of advanced video conferencing solutions. Designed to meet the needs of modern communication, the AVC01U combines a range of impressive features and technologies to ensure seamless connectivity and high-quality interactions.

One of the standout characteristics of the Hitachi AVC01U is its sophisticated video capabilities. The unit supports high-definition video resolution, enabling crystal-clear visuals that enhance the overall conferencing experience. With the ability to deliver 1080p resolution at 60 frames per second, users can expect smooth and lifelike video, making virtual meetings more engaging and productive.

In addition to high-quality video, the AVC01U is equipped with advanced audio technology. Its integrated microphone array captures voices from various angles, ensuring that every participant's voice is heard clearly, regardless of their position in the room. Coupled with echo cancellation and noise reduction features, the audio quality during meetings is significantly enhanced, providing a natural and immersive communication experience.

The AVC01U also boasts seamless connectivity options. It supports multiple connection protocols, including HDMI, USB, and wireless connectivity, allowing users to easily link their devices and share content effortlessly. This versatility makes it an excellent choice for organizations that prioritize collaboration and flexibility in their meeting setups.

Moreover, the Hitachi AVC01U is designed with user-friendliness in mind. Its intuitive interface and remote control make it easy for users of all technological backgrounds to operate the device without a steep learning curve. This accessibility ensures that all meeting participants can focus on the discussion rather than technology.

Another notable feature of the AVC01U is its scalability. It can be integrated into a variety of environments, from small meeting rooms to larger conference spaces. This adaptability makes it a valuable tool for businesses looking to enhance their communication infrastructure without compromising on quality or performance.

In summary, the Hitachi AVC01U is a state-of-the-art video conferencing solution that stands out with its high-definition video, superior audio performance, versatile connectivity options, user-friendly interface, and scalability. It addresses the modern needs of communication in diverse settings, making it an essential asset for any organization seeking to improve its collaboration capabilities.