Poulan PP400E instruction manual Safety Rules, Operate Your SAW Safely, Plan Ahead

Page 2
and if damaged, have repaired by an authorized service dealer.
MAINTAIN YOUR SAW IN GOOD WORKING ORDER
S Have all chain saw service performed by an authorized service dealer except

SAFETY RULES

WARNING: When using electric

dition and mentally alert. If you have any

condition that might be aggravated by

gardening appliances, basic safety pre-

strenuous work, check with doctor be-

cautions must always be followed to re-

fore operating.

duce the risk of fire, electric shock, and

Watch what you are doing. Use com-

serious injury. Read and follow all

mon sense.

instructions.

 

 

S Do not start cutting until you have a clear

WARNING:

Always

disconnect

work area, secure footing, and especial-

ly if you are felling a tree, a retreat path.

power source when making repairs, ad-

Keep work area clean.

justments, and when changing accesso-

OPERATE YOUR SAW SAFELY

ries and attachments such as saw bar,

S Do not operate with one hand. Serious

chain or guards.

 

 

 

 

injury to the operator, helpers, or by-

Because a chain saw is a high-speed

standers may result from one-handed

woodcutting tool,

special

precautions

operation. A chain saw is intended for

must be observed to reduce risk of acci-

two-handed use.

dents. Careless or improper use of this

S Do not operate saw from a ladder or in a

tool can cause serious injury.

 

 

tree.

PLAN AHEAD

 

 

 

 

S Make sure the chain will not make con-

S Restrict the use of your saw to adult us-

tact with any object while starting the

ers who understand and can follow the

saw. Never start the saw when the

safety rules, precautions, and operating

guide bar is in a cut.

instructions found in this manual.

S Do not force chain saw. It will do the job

S Dress properly. Wear protective gear.

better and safer at the rate for which it

Always use steel-toed safety footwear

was intended.

with non-slip soles; snug-fitting cloth-

S Do not put pressure on the saw, espe-

ing; heavy-duty, non-slip gloves; eye

cially at the end of the cut. Doing so can

protection such as non-fogging,

cause you to lose control when the cut is

vented goggles or face screen; an ap-

completed.

proved safety hard hat; and sound

S Stop the saw before setting it down.

barriers (ear plugs or mufflers) to pro-

S Hand carry saw only when motor is

tect your hearing. Regular users

stopped. Carry the chain saw by the

should have hearing checked regular-

front handle with the saw stopped, finger

ly as chain saw noise can damage

off the switch, the guide bar and saw

hearing.

 

 

chain to the rear.

S Secure hair above shoulder length. Do

S Use the right tool, cut wood only. Don’t

not wear loose clothing or jewelry; they

use chain saw for purpose not intended;

can get caught in moving parts.

for example, don’t use chain saw for cut-

 

Safety Hat

Hearing

ting plastic, masonry, non-wood building

Protection

Eye

materials.

Snug

Protection

S Do not operate a chain saw that is dam-

Fitting

 

Heavy Duty

aged, improperly adjusted, or not com-

Clothing

 

pletely and securely assembled. Al-

 

Gloves

 

 

ways replace bar, chain, hand guard, or

 

 

 

 

 

 

other parts immediately if they become

Safety

Safety Chaps

damaged, broken, or are otherwise re-

moved.

Shoes

S

Inspect chain saw cords periodically

 

SKeep all parts of your body away from the chain when saw is running.

S Keep children away. Do not let visitors contact chain saw or extension cord. All visitors should be kept at least 30 feet (10 meters) away from work area.

S Do not handle or operate a chain saw when you are fatigued, ill, upset, or if you have taken alcohol, drugs, or medica- tion. You must be in good physical con-

2

the items listed in the MAINTENANCE section of this manual.

S Make certain saw chain stops moving when trigger switch is released.

Image 2
Contents Français EnglishEspañol 545117548Plan Ahead Safety RulesOperate Your SAW Safely Use a voltage supply as shown on the nameplate of the unit Electrical SafetySion and/or causing damage to unit Conductor, such as metal fences or pipesMaintain Control Guard Against KickbackReduce the Chance Kickback Kickback Safety Features Chain Brake and CKA AngleEither of these reactions may cause you Double Insulation ConstructionAssembly OperationStopping Your SAW Before Starting SAW Guide BAR and Chain OILChain Brake Starting Your SAWTree Felling Techniques Cutting MethodsOperating Tips Felling Large Trees 6 inches in diameter or largerImportant Points Hinge holds tree on stump and helps control fallCutting a Fallen Tree Bucking Bucking TechniquesPruning Bucking Using a LOG or Support StandLimbing Through the limbMaintenance Service and Adjustments To Replace Chain Chain AdjustmentCustomer Serviceable Parts Seasonal Storage Troubleshooting Table Cause RemedyStorage Steps after each useWarranty Statement

PP400E specifications

The Poulan PP400E is a gas-powered chainsaw designed for homeowners and DIY enthusiasts who need a reliable tool for cutting firewood, clearing brush, or tree trimming. This chainsaw combines power, efficiency, and user-friendly features, making it an excellent choice for a range of cutting tasks.

One of the standout features of the Poulan PP400E is its robust 40cc, 2-cycle engine. This powerful engine provides the necessary torque and cutting speed, allowing users to tackle both light and medium-duty tasks with ease. The engine is engineered for optimum fuel efficiency, giving users longer run times between refuels, which is particularly useful during extended cutting sessions.

The PP400E incorporates a 16-inch bar and chain, which strikes a balance between versatility and control. The 16-inch length is ideal for handling smaller jobs while still providing enough reach for larger branches and logs. The chain is designed for quick and easy adjustments, enabling users to maintain proper tension without the need for complex tools, making it more convenient for those less experienced with chainsaw maintenance.

Safety is a top priority in the design of the PP400E, which includes a chain brake system that instantly stops the chain in the event of kickback, offering peace of mind during operation. Additionally, the chainsaw features a comfort grip handle, which is ergonomically designed to reduce fatigue and enhance control, allowing users to work for longer periods without excessive strain.

The Poulan PP400E also features an automatic oiler that delivers a steady supply of lubrication to the chain and bar, ensuring efficient operation and prolonging the life of the cutting components. This system is particularly beneficial for maintaining optimal performance in various cutting conditions.

In terms of design, the Poulan PP400E is relatively lightweight compared to other chainsaws in its class, making it easy to handle and maneuver. Its compact design contributes to its portability, allowing users to transport it easily to different job sites.

Overall, the Poulan PP400E stands out as a versatile and dependable chainsaw that meets the needs of casual users and serious hobbyists alike. With its powerful engine, user-friendly features, and commitment to safety, the PP400E is a smart investment for anyone looking to tackle outdoor cutting tasks with efficiency and ease.