Poulan PP400E Either of these reactions may cause you, Double Insulation Construction

Page 6

associated without a chain brake. When purchasing replacements, considerations should be given to the lower CKA values. In all cases, lower CKA values represent a safer operating environment for the user.

STip contact in some cases may cause a lightning fast REACTION, kicking the

guide bar up and back toward the op- erator.

SPinching the saw chain along the tip of the guide bar may push the guide bar rapidly back towards the operator.

SEither of these reactions may cause you

Computed kickback angle (CKA) Table

to lose control of the saw which could re- sult in serious injury. Do not rely exclu- sively upon safety devices built into your saw.

The following guide bar and chain com- binations meet kickback requirements of CSA Z62.1 & Z62.3 and ANSI B175.1 when used on saws listed in this manual. Use of bar and chain combinations other than those listed is not recommended and may not meet the CKA requirements per standard.

 

BAR

 

 

CKA without

MODEL

P/N

 

Length

CHAIN P/N

chain brake

PP400E

952044418

 

18″

952051338

20_

SAFETY NOTICE: Exposure to vibra- tions through prolonged use of hand tools could cause blood vessel or nerve damage in the fingers, hands, and joints of people prone to circulation disorders or abnormal swelling. Prolonged use in cold weather has been linked to blood vessel damage in otherwise healthy people. If symptoms occur such as numbness, pain, loss of strength, change in skin color or texture, or loss of feeling in the fingers, hands, or joints, discontinue the use of this tool and seek medical attention. An anti-vibration sys- tem does not guarantee the avoidance of these problems. Users who operate power tools on a continual and regular basis must closely monitor their physical condition and the condition of this tool.

DOUBLE INSULATION

CONSTRUCTION

This unit is double insulated to help pro- tect against electric shock. Double in- sulation construction consists of two separate “layers” of electrical insulation instead of grounding.

Tools built with this insulation system are not intended to be grounded. No grounding means is provided on this unit, nor should a means of grounding be added to this unit.

Safety precautions must be observed when operating any electrical tool. The double insulation system only provides added protection against injury resulting from an internal electrical insulation failure.

WARNING: All electrical repairs to this unit, including housing, switch, motor, etc., must be diagnosed and repaired by qualified service personnel. Replacement parts for a double insulated appliance must be identical to the parts they replace. A double insulated appliance is marked with the words “double insulation” or “double insulated”. The symbol (square within a square) may also be marked on the appliance. Failure to have the unit repaired by authorized service personnel can cause the double insula- tion construction to become ineffective and result in serious injury.

STANDARDS: This product is listed by Underwriters Laboratories, Inc. in accor- dance with UL Standard 1662 and CSA Standards Z62.1 and Z62.3 and ANSI B175.1.

ANSI B175.1-2000“American National Standard for Powered Tools -- Safety Re- quirements”

CSA Z62.3 “Chain Saw Kickback Occu- pational Health and Safety”

CSA Z62.1 “Chain Saws -- Occupational Health and Safety”

SAVE THESE INSTRUCTIONS

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Français EnglishEspañol 545117548Safety Rules Operate Your SAW SafelyPlan Ahead Use a voltage supply as shown on the nameplate of the unit Electrical SafetySion and/or causing damage to unit Conductor, such as metal fences or pipesGuard Against Kickback Reduce the Chance KickbackMaintain Control Kickback Safety Features Chain Brake and CKA AngleEither of these reactions may cause you Double Insulation ConstructionAssembly OperationStopping Your SAW Before Starting SAW Guide BAR and Chain OILChain Brake Starting Your SAWTree Felling Techniques Cutting MethodsOperating Tips Felling Large Trees 6 inches in diameter or largerImportant Points Hinge holds tree on stump and helps control fallCutting a Fallen Tree Bucking Bucking TechniquesPruning Bucking Using a LOG or Support StandLimbing Through the limbMaintenance Service and Adjustments Chain Adjustment Customer Serviceable PartsTo Replace Chain Seasonal Storage Troubleshooting Table Cause RemedyStorage Steps after each useWarranty Statement

PP400E specifications

The Poulan PP400E is a gas-powered chainsaw designed for homeowners and DIY enthusiasts who need a reliable tool for cutting firewood, clearing brush, or tree trimming. This chainsaw combines power, efficiency, and user-friendly features, making it an excellent choice for a range of cutting tasks.

One of the standout features of the Poulan PP400E is its robust 40cc, 2-cycle engine. This powerful engine provides the necessary torque and cutting speed, allowing users to tackle both light and medium-duty tasks with ease. The engine is engineered for optimum fuel efficiency, giving users longer run times between refuels, which is particularly useful during extended cutting sessions.

The PP400E incorporates a 16-inch bar and chain, which strikes a balance between versatility and control. The 16-inch length is ideal for handling smaller jobs while still providing enough reach for larger branches and logs. The chain is designed for quick and easy adjustments, enabling users to maintain proper tension without the need for complex tools, making it more convenient for those less experienced with chainsaw maintenance.

Safety is a top priority in the design of the PP400E, which includes a chain brake system that instantly stops the chain in the event of kickback, offering peace of mind during operation. Additionally, the chainsaw features a comfort grip handle, which is ergonomically designed to reduce fatigue and enhance control, allowing users to work for longer periods without excessive strain.

The Poulan PP400E also features an automatic oiler that delivers a steady supply of lubrication to the chain and bar, ensuring efficient operation and prolonging the life of the cutting components. This system is particularly beneficial for maintaining optimal performance in various cutting conditions.

In terms of design, the Poulan PP400E is relatively lightweight compared to other chainsaws in its class, making it easy to handle and maneuver. Its compact design contributes to its portability, allowing users to transport it easily to different job sites.

Overall, the Poulan PP400E stands out as a versatile and dependable chainsaw that meets the needs of casual users and serious hobbyists alike. With its powerful engine, user-friendly features, and commitment to safety, the PP400E is a smart investment for anyone looking to tackle outdoor cutting tasks with efficiency and ease.
Top Page Image Contents