Poulan P3314, P3314WS, P3314WSA, P3416, P3516PR, P4018WM, P4018WT, P3818AV, P4018AV, P4018AV BH

Page 15

SClean the oil holes and bar groove after each 5 hours of operation.

Remove Sawdust From

Guide Bar Groove

Oil Holes

S Burring of guide bar rails is a normal process of rail wear. Remove these burrs with a flat file.

SWhen rail top is uneven, use a flat file to re- store square edges and sides.

File Rail Edges

and Sides

Square

Worn Groove

Correct Groove

Replace guide bar when the groove is worn, the guide bar is bent or cracked, or when ex- cess heating or burring of the rails occurs. If re- placement is necessary, use only the guide bar specified for your saw in the repair parts list or on the decal located on the chain saw.

CHECK FUEL MIXTURE LEVEL

S See FUELING ENGINE under the OP- ERATION section.

LUBRICATION

Bar Oil

Fill Cap

SSee GUIDE BAR AND CHAIN OIL under the OPERATION section.

INSPECT AND CLEAN UNIT AND DECALS

S After each use, inspect complete unit for loose or damaged parts. Clean the unit and decals using a damp cloth with a mild deter- gent.

SWipe off unit with a clean dry cloth.

CHECK CHAIN BRAKE

See CHAIN BRAKE in the OPERATION section.

CLEAN AIR FILTER

CAUTION: Do not clean filter in gasoline or other flammable solvent to avoid creating a fire hazard or producing harmful evaporative emissions.

Cleaning the air filter:

A dirty air filter decreases the life and perfor- mance of the engine and increases fuel con- sumption and harmful emissions. Always clean your air filter after 10 tanks of fuel or 5 hours of operation, whichever comes first. Clean more frequently in dusty conditions. A used air filter can never be completely cleaned. It is advisable to replace your air fil-

ter with a new one after every 50 hours of op- eration, or annually, whichever comes first.

1.Loosen 3 screws on cylinder cover.

2.Remove cylinder cover.

3.Remove air filter cover and air filter.

4.Clean the air filter using hot soapy water. Rinse with clean cool water. Air dry com- pletely before reinstalling.

5.Reinstall air filter and air filter cover.

6.Reinstall cylinder cover and 3 screws. Tighten securely.

Cylinder

Air FilterCover

Cover

Air Filter

INSPECT MUFFLER AND SPARK ARRESTING SCREEN

WARNING: The muffler on this product contains chemicals known to the State of California to cause cancer.

As the unit is used, carbon deposits build up on the muffler and spark arresting screen, and must be removed to avoid creating a fire hazard or affecting engine performance.

Replace the spark arresting screen if breaks occur.

Spark Exhaust

Arresting Outlet

Screen Cover

Nut

Muffler

CLEANING THE SPARK ARREST- ING SCREEN

Cleaning is required every 25 hours of op- eration or annually, whichever comes first.

1.Loosen and remove the nut from the ex- haust outlet cover.

2.Remove the exhaust oulet cover.

3.Remove spark arresting screen. Handle screen carefully to prevent damage.

4.Clean the spark arresting screen gently with a wire brush. Replace screen if breaks are found.

5.Replace any broken or cracked muffler parts.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents 545137224 11/30/06 Manual de Instrucciones Manuel d’InstructionsStarting Reminder Plan AheadTions found in this manual Kickback Operate Your SAW SafelyMaintain Your SAW in Good Working Order Handle Fuel with CautionAvoid Pull-In Reduce the Chance of KickbackMaintain Control Avoid Pinch-KickbackKickback Safety Features Chain Brake and CKA AngleChain saws as set by Ansi B175.1 Attaching the BAR & Chain If not AssemblyAdjusting the tension Chain TensionChecking the tension ON/STOP Switch Throttle Trigger OperationKnow Your Chain SAW Before Starting Engine Throttle LOCK-OUT Chain BrakeCHOKE/FAST Idle Lever Primer BulbRight Foot Through Rear Handle Important Points to RememberStarting a Warm Engine Difficult Starting or starting a flooded engineTree Felling Techniques Braking function control Caution The chain brake must beInertia activating function control Operating TipsImportant Points Felling Large TreesNotch CUT and Felling the Tree Cutting a Fallen TreeLimbing Bucking Using a LOG or Support StandBucking Without a Support Limbing and Pruning Important PointsService Check Fuel Mixture Level Inspect and Clean Unit and DecalsClean AIR Filter Cleaning the Spark ARREST- ING ScreenStorage Load Adjustment Engine EngineOther Ligations The U.S. Environmental Limited WarrantyNANCE, Replacement and Repair

P3314, P3314WS, P3314WSA, P3416, P3516PR, P4018WM, P4018WT, P3818AV, P4018AV, P4018AV BH specifications

The Poulan line of chainsaws has established a strong reputation among both amateur and professional users for their reliability, performance, and innovative features. In this article, we delve into several notable models: the P3314, P3314WS, P3314WSA, P3416, P3516PR, P4018WM, P4018WT, P3818AV, P4018AV, and P4018AV BH.

Starting with the Poulan P3314, this chainsaw is powered by a robust 33cc two-cycle engine, delivering exceptional cutting power for light to medium-duty tasks. Its 14-inch bar provides a perfect balance between agility and efficiency. The tool-less chain tension system is another highlight, allowing users to easily adjust the chain without needing additional tools, enhancing usability.

The P3314WS and P3314WSA models build upon this foundation, introducing enhanced features like an automatic oiler for consistent lubrication during operation, thus prolonging the life of the bar and chain. The P3314WSA also includes an anti-vibration system, providing increased comfort during extended use, reducing operator fatigue.

Next, the Poulan P3416 offers a slightly larger 34cc engine, making it ideal for tackling larger projects while still maintaining a lightweight, easy-to-handle design. Its 16-inch bar is perfect for larger cuts, and the convenient primer bulb aids in easy starting, even in colder weather.

The P3516PR takes performance a step further with a powerful 35cc engine. This model excels in versatility, suitable for both home use and light commercial tasks. Its ergonomic design, along with the lightweight build, enables users to handle the chainsaw comfortably for longer periods.

For those requiring even more power, the P4018WM and P4018WT feature an 40cc engine, capable of handling tougher jobs effortlessly. Both models come equipped with an 18-inch bar, making them well-suited for cutting larger logs or clearing heavy brush. The addition of an easy-access air filter allows for straightforward maintenance, thereby increasing the chainsaw’s longevity.

The P3818AV introduces advanced anti-vibration technology, further enhancing user comfort, while the P4018AV and P4018AV BH models offer specialized features like the brushless motor for greater efficiency and durability. These advanced models are engineered for professionals who demand the highest performance and reliability.

Overall, the Poulan chainsaw lineup provides a range of options tailored to different user needs, from occasional home projects to intense commercial tasks. Each model showcases Poulan's commitment to delivering innovative features that elevate the cutting experience, making them a popular choice for users at all skill levels.
Top Page Image Contents