Poulan BH2160 LE Operate Your SAW Safely, Maintain Your SAW in Good Working Order, Kickback

Page 3

SCarefully plan your sawing operation in ad- vance. Do not start cutting until you have a clear work area, secure footing, and, if you are felling trees, a planned retreat path.

OPERATE YOUR SAW SAFELY

SDo not operate a chain saw with one hand. Serious injury to the operator, helpers, by- standers or any combination of these per- sons may result from one-handed opera-

tion. A chain saw is intended for two-handed use.

SOperate the chain saw only in a well-venti-

lated outdoor area.

SDo not operate saw from a ladder or in a tree.

SMake sure the chain will not make contact with any object while starting the engine. Never try to start the saw when the guide

bar is in a cut.

SDo not put pressure on the saw at the end of the cut. Applying pressure can cause you to lose control when the cut is com-

pleted.

S Stop the engine before setting the saw down.

SDo not operate a chain saw that is dam- aged, improperly adjusted, or not com- pletely and securely assembled. Always replace bar, chain, hand guard, or chain brake immediately if it becomes damaged, broken or is otherwise removed.

SWith the engine stopped, hand carry the chain saw with the muffler away from your body, and the guide bar and chain to the rear, preferably covered with a scabbard.

MAINTAIN YOUR SAW IN GOOD WORKING ORDER

SHave all chain saw service performed by a qualified service dealer with the exception of the items listed in the maintenance sec- tion of this manual. For example, if improp- er tools are used to remove or hold the fly- wheel when servicing the clutch, structural damage to the flywheel can occur and

cause the flywheel to burst.

SMake certain the saw chain stops moving when the throttle trigger is released. For

correction, refer to CARBURETOR AD-

JUSTMENTS.

SNever modify your saw in any way.

SKeep the handles dry, clean, and free of oil

or fuel mixture.

SKeep fuel and oil caps, screws, and fas- teners securely tightened.

S Use only PoulanR accessories and re- placement parts as recommended.

HANDLE FUEL WITH CAUTION

SDo not smoke while handling fuel or while operating the saw.

SEliminate all sources of sparks or flame in the areas where fuel is mixed or poured. There should be no smoking, open flames, or work that could cause sparks. Allow en-

gine to cool before refueling.

SMix and pour fuel in an outdoor area on bare ground; store fuel in a cool, dry, well ventilated place; and use an approved,

marked container for all fuel purposes. Wipe up all fuel spills before starting saw.

SMove at least 10 feet (3 meters) from fuel- ing site before starting engine.

STurn the engine off and let saw cool in a non-combustible area, not on dry leaves, straw, paper, etc. Slowly remove fuel cap

and refuel unit.

SStore the unit and fuel in an area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc.

KICKBACK

WARNING: Avoid kickback which can result in serious injury. Kickback is the backward, upward or sudden forward motion of the guide bar occurring when the saw chain near the upper tip of the guide bar con- tacts any object such as a log or branch, or when the wood closes in and pinches the saw chain in the cut. Contacting a foreign ob- ject in the wood can also result in loss of chain saw control.

SRotational Kickback can occur when the moving chain contacts an object at the up- per tip of the guide bar. This contact can cause the chain to dig into the object, which stops the chain for an instant. The result is a lightning fast, reverse reaction which kicks the guide bar up and back to- ward the operator.

SPinch-Kickbackcan occur when the the wood closes in and pinches the moving saw chain in the cut along the top of the guide bar and the saw chain is suddenly stopped. This sudden stopping of the chain results in a reversal of the chain force used to cut wood and causes the saw to move in the opposite direction of the chain rotation. The saw is driven straight back toward the operator.

S Pull-Incan occur when the moving chain contacts a foreign object in the wood in the cut along the bottom of the guide bar and the saw chain is suddenly stopped. This sudden stopping pulls the saw forward and away from the operator and could easily cause the operator to lose control of the saw.

Avoid Pinch-Kickback:

S Be extremely aware of situations or ob- structions that can cause material to pinch the top of or otherwise stop the chain.

SDo not cut more than one log at a time.

SDo not twist the saw as the bar is with- drawn from an undercut when bucking.

Avoid Pull-In:

SAlways begin cutting with the engine at full speed and the saw housing against wood.

S Use wedges made of plastic or wood. Never use metal to hold the cut open.

Kickback Path

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents 16/04 English Español FrançaisIdentification of Symbols Safety RulesPlan Ahead Kickback Operate Your SAW SafelyMaintain Your SAW in Good Working Order Handle Fuel with CautionKickback Safety Features Reduce the Chance of KickbackMaintain Control 952044370 Chain Brake and CKA AngleFront Hand Guard, designed to reduce Back toward the operatorChain Brake Nuts AssemblyInside view Chain Brake Adjustment located on Chain Brake Attaching the BAR & Chain If notAdjusting the tension Checking the tensionChain Tension Throttle LOCK-OUT ON/STOP SwitchKnow Your Chain SAW Throttle TriggerImportant Points to Remember StartingFueling Engine BAR and Chain LubricationCutting Methods Starting a Warm EngineImportant Points Direction of Fall Tree Felling TechniquesFelling Large Trees Notch CUT and Felling the TreeBucking Without a Support Bucking Using a LOG or Support StandCutting a Fallen Tree Types of Cutting Used for BuckingPruning ServiceLimbing and Pruning Important Points LimbingInspect Muffler and Spark Arresting Screen Cleaning the air filterCleaning the Spark ARREST- ING Screen AIR FilterIgnition Timing Carburetor AdjustmentBAR Maintenance Chain SharpeningNeed ASSISTANCE? Need Service PART?Need ASSISTANCE? StorageTions The U.S. Environmental Protection Limited WarrantyPlacement and Repair of Emission

BH2160 LE specifications

The Poulan BH2160 LE is a versatile and robust hedge trimmer designed for homeowners and landscaping professionals alike. As part of Poulan’s esteemed line of outdoor power equipment, the BH2160 LE delivers outstanding cutting performance, making it an essential tool for maintaining your garden and yard.

One of the standout features of the BH2160 LE is its powerful 24cc, 2-cycle engine. This engine offers an impressive balance of power and efficiency, enabling users to tackle thick and dense hedges with ease. The lightweight design of the trimmer, combined with its ergonomic handle, ensures comfort during extended use, reducing fatigue and allowing for precise maneuverability.

The BH2160 LE is equipped with a 22-inch dual reciprocating blade, designed for efficient and smooth cutting. The sharpened cutting edges of the blades provide a clean cut, promoting healthy growth in hedges and shrubs. One notable technology incorporated into the design is the anti-vibration system, which minimizes vibrations transmitted to the operator, thus enhancing comfort during operation.

Another key characteristic of the Poulan BH2160 LE is its availability with an adjustable handle. This feature allows users to customize their grip position according to their personal preference and the nature of the task at hand. Additionally, the trimmer’s built-in blade guard adds an extra layer of safety, protecting both the user and the blades from damage during storage and transportation.

For ease of use and maintenance, the BH2160 LE comes with a tool-less air filter access feature. This innovation simplifies filter cleaning and replacement, extending the lifespan of the engine and ensuring optimal performance. Moreover, the model features a fuel tank designed for easy refueling and minimizes the risk of spills.

Overall, the Poulan BH2160 LE is a powerful, user-friendly hedge trimmer that combines efficiency with comfort. Its advanced engine technology, sharp dual blades, and ergonomic design make it a dependable choice for those looking to maintain their outdoor spaces. Whether tackling overgrown hedges or shaping ornamental shrubs, the BH2160 LE offers reliability and power suitable for a variety of gardening tasks.
Top Page Image Contents