Poulan 545186805 Bucking Without a Support, Bucking Using a LOG or Support Stand, Limbing

Page 13

First cut on compression side of log

Second cut

Second cut

First cut on compression side of log

BUCKING WITHOUT A SUPPORT

SOvercut through 1/3 of the diameter of the log.

SRoll the log over and finish with a second overcut.

SWatch for logs with a compression side to prevent the saw from pinching. See il- lustrations for cutting logs with a compres- sion side.

BUCKING USING A LOG OR SUPPORT STAND

SRemember your first cut is always on the compression side of the log.

(Refer to the illustrations below for your

first and second cut)

S Your first cut should extend 1/3 of the diameter of the log.

SFinish with your second cut.

Using a log for support 2nd Cut

1st Cut

1st Cut

2nd Cut

Using a support stand 2nd Cut

1st Cut

1st Cut

2nd Cut

LIMBING AND PRUNING

WARNING: Be alert for and guard against kickback. Do not allow the moving chain to contact any other branches or objects at the nose of the guide bar when limbing or pruning. Allowing such contact can result in serious injury.

WARNING: Never climb into a tree to limb or prune. Do not stand on ladders, plat- forms, a log, or in any position which can cause you to lose your balance or control of the saw.

IMPORTANT POINTS

S Work slowly, keeping both hands firmly gripped on the saw. Maintain secure footing and balance.

SWatch out for springpoles. Springpoles are small size limbs which can catch the saw chain and whip toward you or pull you off bal- ance. Use extreme caution when cutting

small size limbs or slender material.

S Be alert for springback. Watch out for branches that are bent or under pressure. Avoid being struck by the branch or the saw when the tension in the wood fibers is released.

S Keep a clear work area. Frequently clear branches out of the way to avoid tripping over them.

LIMBING

SAlways limb a tree after it is cut down. Only then can limbing be done safely and prop- erly.

SLeave the larger limbs underneath the felled tree to support the tree as you work.

SStart at the base of the felled tree and work toward the top, cutting branches and limbs. Remove small limbs with one cut.

SKeep the tree between you and the chain.

Cut from the side of the tree opposite the branch you are cutting.

S Remove larger, supporting branches with the cutting techniques described in BUCK-

ING WITHOUT A SUPPORT.

SAlways use an overcut to cut small and free- ly hanging limbs. Undercutting could cause limbs to fall and pinch the saw.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Manual de Instrucciones Manuel d’Instructions Always use two hands when operating the chain saw Using the chain sawStarting Reminder Plan AheadMaintain Your SAW in Good Working Order Operate Your SAW SafelyHandle Fuel with Caution KickbackMaintain Control Reduce the Chance of KickbackAvoid Pinch-Kickback Avoid Pull-InChain Brake and CKA Angle Kickback Safety FeaturesIf your hand slips off the front handlebar Attaching the BAR & Chain If not AssemblyChain Tension Adjusting the tensionChecking the tension Operation Fuel Requirements Before Starting Engine Fueling EngineBAR and Chain Lubrication Starting a Warm Engine Important Points to RememberDifficult Starting or starting a flooded engine Kickback occursInertia activating function control Braking function control Caution The chain brake must beOperating Tips Tree Felling TechniquesCutting a Fallen Tree Notch CUT and Felling the TreeImportant Points Types of Cutting Used for BuckingBucking Without a Support Bucking Using a LOG or Support StandLimbing and Pruning Important Points LimbingService Clean AIR Filter Inspect and Clean Unit and DecalsCleaning the Spark ARREST- ING Screen Check Fuel Mixture LevelReplace Spark Plug Chain AdjustmentTo Sharpen Chain Replace Fuel FilterStorage Carburetor AdjustmentCooling System Seasonal StorageEngine Load Adjustment EngineOther Ligations The U.S. Environmental Poulan PROIntermediate 125 hours Extended 300 hours

545186805 specifications

The Poulan 545186805 is an impressive chainsaw designed to meet the demands of both the seasoned professional and the enthusiastic DIYer. This chainsaw combines robust performance with user-friendly features, making it a popular choice among users looking for reliability and efficiency.

One of the key characteristics of the Poulan 545186805 is its powerful engine. Equipped with a 50cc two-stroke engine, it delivers impressive cutting power that allows users to tackle large logs and tough tree trunks with ease. This engine is designed for optimal performance, offering a balance of power and fuel efficiency, ensuring that users can work longer without frequently stopping to refuel.

In addition to its potent engine, the Poulan 545186805 features a 20-inch guide bar, allowing for deeper cuts and the ability to handle larger wood types. This extended reach is particularly beneficial for users who need to fell trees or cut through thicker branches, adding versatility to its applications.

Safety is an important factor for chainsaw users, and the Poulan 545186805 incorporates several safety features designed to protect users. It has an automatic chain oiler which achieves continuous lubrication, reducing wear on the chain and the bar, thereby enhancing longevity. Additionally, it comes equipped with a chain brake that reduces the risk of kickback, ensuring safer operation.

The design of the Poulan 545186805 emphasizes comfort and ease of use. It features an ergonomic handle that provides a secure grip, reducing fatigue during extended use. The lightweight construction further enhances maneuverability, making it easier to handle for extended periods, which is especially important for those undertaking larger projects.

Moreover, the Poulan 545186805 integrates advanced technology to ensure a smoother operation. The Easy Start feature allows users to start the engine with minimal effort, preventing frustration and providing a user-friendly experience, particularly for those who may not be accustomed to handling chainsaws.

In summary, the Poulan 545186805 is a versatile and powerful chainsaw that stands out with its combination of performance, safety, and user-friendly features. Whether for professional use or home projects, this chainsaw can effectively meet the needs of a variety of users, making it a solid choice for anyone in need of a reliable cutting tool.
Top Page Image Contents