Poulan 545186804 Bucking Without a Support, Bucking Using a LOG or Support Stand

Page 13

start the saw and carefully reenter the cut. To avoid kickback and chain damage, do not use a metal wedge. Do not attempt to restart your saw when it is pinched or hung in a log.

Use a wedge to remove pinched saw

Turn saw OFF and use a plastic or wooden wedge to force cut open.

Overcutting begins on the top side of the log with the bottom of the saw against the log. When overcutting use light downward pres- sure.

Overcutting

Undercutting

Undercutting involves cutting on the under- side of the log with top of saw against the log. When undercutting use light upward pres- sure. Hold saw firmly and maintain control. The saw will tend to push back toward you.

WARNING: Never turn saw upside down to undercut. The saw cannot be con- trolled in this position.

Always make your first cut on the compres- sion side of the log. The compression side of the log is where the pressure of the log’s weight is concentrated.

First cut on compression side of log

Using a log for support 2nd Cut

1st Cut

1st Cut

2nd Cut

Using a support stand 2nd Cut

1st Cut

1st Cut

2nd Cut

Second cut

Second cut

First cut on compression side of log

BUCKING WITHOUT A SUPPORT

SOvercut through 1/3 of the diameter of the

log.

SRoll the log over and finish with a second overcut.

SWatch for logs with a compression side to prevent the saw from pinching. See il- lustrations for cutting logs with a compres- sion side.

BUCKING USING A LOG OR SUPPORT STAND

SRemember your first cut is always on the compression side of the log.

(Refer to the illustrations below for your first and second cut)

S Your first cut should extend 1/3 of the diameter of the log.

SFinish with your second cut.

LIMBING AND PRUNING

WARNING: Be alert for and guard against kickback. Do not allow the moving chain to contact any other branches or objects at the nose of the guide bar when limbing or pruning. Allowing such contact can result in serious injury.

WARNING: Never climb into a tree to limb or prune. Do not stand on ladders, plat- forms, a log, or in any position which can cause you to lose your balance or control of the saw.

IMPORTANT POINTS

S Work slowly, keeping both hands firmly gripped on the saw. Maintain secure footing and balance.

SWatch out for springpoles. Springpoles are small size limbs which can catch the saw chain and whip toward you or pull you off bal-

ance. Use extreme caution when cutting small size limbs or slender material.

S Be alert for springback. Watch out for branches that are bent or under pressure. Avoid being struck by the branch or the saw when the tension in the wood fibers is released.

S Keep a clear work area. Frequently clear branches out of the way to avoid tripping over them.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Manual de Instrucciones Manuel d’Instructions Plan Ahead Starting ReminderTions found in this manual Maintain Your SAW in Good Working Order Operate Your SAW SafelyHandle Fuel with Caution KickbackMaintain Control Reduce the Chance of KickbackAvoid Pinch-Kickback Avoid Pull-InChain Brake and CKA Angle Kickback Safety FeaturesChain saws as set by Ansi B175.1 Attaching the BAR & Chain If not AssemblyChain Tension Adjusting the tensionChecking the tension Operation ON/STOP Switch Throttle TriggerKnow Your Chain SAW CHOKE/FAST Idle Lever Throttle LOCK-OUTPrimer Bulb Chain BrakeStarting a Warm Engine Important Points to RememberDifficult Starting or starting a flooded engine Right Foot Through Rear HandleInertia activating function control Braking function control Caution The chain brake must beOperating Tips Tree Felling TechniquesNotch CUT and Felling the Tree Felling Large TreesCutting a Fallen Tree Important PointsBucking Without a Support Bucking Using a LOG or Support StandLimbing and Pruning Important Points Use a wedge to remove pinched sawLimbing ServicePruning General RecommendationsClean AIR Filter Inspect and Clean Unit and DecalsCheck for Loose Fasteners and Parts Check Chain SharpnessChain Adjustment Cleaning the Spark ARREST- ING ScreenInspect Muffler and Spark Arresting Screen Replace Spark PlugIdle Speed-T Carburetor AdjustmentCooling System RightSeasonal Storage StorageFuel System EngineLoad Adjustment Engine Troubleshooting Table Cause RemedyLigations The U.S. Environmental PoulanConsequential Damages Poulan

545186804 specifications

The Poulan 545186804 is a powerful and versatile chainsaw that is designed for homeowners and professionals alike. With its robust construction and advanced features, it delivers outstanding performance for various cutting tasks, from trimming branches to felling small trees.

One of the main features of the Poulan 545186804 is its 50cc 2-cycle engine, which provides ample power for demanding applications. The engine is designed for efficiency and optimal fuel consumption, ensuring that users can complete their tasks without frequent refueling. Coupled with a high-performance 20-inch bar and chain, this chainsaw can handle a range of cutting tasks, making it an ideal choice for both heavy-duty work and casual use.

The Poulan 545186804 also includes several technologies aimed at enhancing user experience and safety. It features an automatic oiler system that ensures consistent lubrication to the chain, reducing wear and prolonging the life of the chainsaw. This system ensures that the bar and chain are properly lubricated during operation, helping to maintain cutting efficiency and prevent overheating.

Safety is a crucial consideration in the design of the Poulan 545186804. The chainsaw is equipped with a chain brake that stops the chain’s rotation in the event of kickback, protecting the user from potential injuries. Additionally, it has a comfortable grip handle that reduces vibration, allowing for extended use without causing fatigue in the hands or arms.

Another notable characteristic of the Poulan 545186804 is its lightweight design. Weighing in at just over 11 pounds, it is easy to maneuver and control, making it suitable for users with varying levels of experience. The chainsaw also features an easy-access air filter and spark plug, simplifying maintenance and ensuring that the unit operates at peak performance.

Overall, the Poulan 545186804 combines power, safety, and user-friendly features, making it an excellent choice for anyone in need of a reliable chainsaw. Whether you are a seasoned professional or a weekend warrior, this chainsaw offers the tools necessary to tackle a variety of cutting tasks efficiently and safely.
Top Page Image Contents