Poulan 545186804 instruction manual Starting Reminder, Plan Ahead, Tions found in this manual

Page 2

IDENTIFICATION OF SYMBOLS

WARNING! This chain saw can be dangerous! Care- less or improper use can cause serious or even fatal injury.

Read and understand the instruction manual before using the chain saw.

Always wear appropriate ear protection, eye protection and head protection.

Always use two hands when operating the chain saw.

WARNING! Contacting the guide bar tip with any object should be avoided; tip contact may cause the guide bar to move suddenly upward and backward, which may cause se- rious injury.

XX_

Measured maximum kickback value without chain brake for the bar and chain combination on the label.

Starting Reminder

Move ON/STOP switch to the ON position.

Slowly press primer bulb 6 times.

Pull choke/fast idle lever out to the full extent (to the FULL CHOKE posi- tion).

Pull the starter rope sharply 5 times with your right hand.

Push the choke/fast idle lever in to the HALF CHOKE position.

Pull the starter rope sharply with your right hand until the engine starts.

SAFETY RULES

WARNING: Always disconnect spark plug wire and place wire where it can- not contact spark plug to prevent accidental starting when setting up, transporting, ad- justing or making repairs except carburetor adjustments.

Because a chain saw is a high-speed wood- cutting tool, special safety precautions must be observed to reduce the risk of accidents. Careless or improper use of this tool can cause serious injury.

PLAN AHEAD

S Read this manual carefully until you com- pletely understand and can follow all safety rules, precautions, and operating instruc- tions before attempting to use the unit.

SRestrict the use of your saw to adult users who understand and can follow safety rules, precautions, and operating instruc-

tions found in this manual.

SWear protective gear. Always use steel- toed safety footwear with non-slip soles; snug-fitting clothing; safety chaps; heavy-

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Manual de Instrucciones Manuel d’Instructions Tions found in this manual Starting ReminderPlan Ahead Handle Fuel with Caution Operate Your SAW SafelyMaintain Your SAW in Good Working Order KickbackAvoid Pinch-Kickback Reduce the Chance of KickbackMaintain Control Avoid Pull-InChain saws as set by Ansi B175.1 Kickback Safety FeaturesChain Brake and CKA Angle Assembly Attaching the BAR & Chain If notChecking the tension Adjusting the tensionChain Tension Know Your Chain SAW ON/STOP Switch Throttle TriggerOperation Primer Bulb Throttle LOCK-OUTCHOKE/FAST Idle Lever Chain BrakeDifficult Starting or starting a flooded engine Important Points to RememberStarting a Warm Engine Right Foot Through Rear HandleOperating Tips Braking function control Caution The chain brake must beInertia activating function control Tree Felling TechniquesCutting a Fallen Tree Felling Large TreesNotch CUT and Felling the Tree Important PointsLimbing and Pruning Important Points Bucking Using a LOG or Support StandBucking Without a Support Use a wedge to remove pinched sawPruning ServiceLimbing General RecommendationsCheck for Loose Fasteners and Parts Inspect and Clean Unit and DecalsClean AIR Filter Check Chain SharpnessInspect Muffler and Spark Arresting Screen Cleaning the Spark ARREST- ING ScreenChain Adjustment Replace Spark PlugCooling System Carburetor AdjustmentIdle Speed-T RightFuel System StorageSeasonal Storage EngineTroubleshooting Table Cause Remedy Load Adjustment EnginePoulan Ligations The U.S. EnvironmentalConsequential Damages Poulan

545186804 specifications

The Poulan 545186804 is a powerful and versatile chainsaw that is designed for homeowners and professionals alike. With its robust construction and advanced features, it delivers outstanding performance for various cutting tasks, from trimming branches to felling small trees.

One of the main features of the Poulan 545186804 is its 50cc 2-cycle engine, which provides ample power for demanding applications. The engine is designed for efficiency and optimal fuel consumption, ensuring that users can complete their tasks without frequent refueling. Coupled with a high-performance 20-inch bar and chain, this chainsaw can handle a range of cutting tasks, making it an ideal choice for both heavy-duty work and casual use.

The Poulan 545186804 also includes several technologies aimed at enhancing user experience and safety. It features an automatic oiler system that ensures consistent lubrication to the chain, reducing wear and prolonging the life of the chainsaw. This system ensures that the bar and chain are properly lubricated during operation, helping to maintain cutting efficiency and prevent overheating.

Safety is a crucial consideration in the design of the Poulan 545186804. The chainsaw is equipped with a chain brake that stops the chain’s rotation in the event of kickback, protecting the user from potential injuries. Additionally, it has a comfortable grip handle that reduces vibration, allowing for extended use without causing fatigue in the hands or arms.

Another notable characteristic of the Poulan 545186804 is its lightweight design. Weighing in at just over 11 pounds, it is easy to maneuver and control, making it suitable for users with varying levels of experience. The chainsaw also features an easy-access air filter and spark plug, simplifying maintenance and ensuring that the unit operates at peak performance.

Overall, the Poulan 545186804 combines power, safety, and user-friendly features, making it an excellent choice for anyone in need of a reliable chainsaw. Whether you are a seasoned professional or a weekend warrior, this chainsaw offers the tools necessary to tackle a variety of cutting tasks efficiently and safely.
Top Page Image Contents