Installation
4.Go Back. Press this key to return to a previous menu or the last channel viewed.
5.Menu. Press this key to display the Menu screen. Press it again to turn off the Menu and return to CBL mode. Press this key to control the receiver if you cannot find your remote control.
6.Enter. Press this key to select a highlighted menu option.
7.Arrow Keys. Press these keys to highlight selections from menu screens.
The keys are also used to change the channel or to move up and down on the
BackLPanel Connections!"
menu screen. Use the keys to move right or left on the menu sceen.
The following back panel descriptions are for reference only. Check with your dealer and/or system installer for specific details.
1. Power. The power cord is attached here.
2. Cable In. This connects your cable TV service to your system.
3. CH3 CH4. This switch determines the channel (3 or 4) to which you set your TV to receive broadcasts. The settings should be the same as the TV setting for use with your VCR (usually channel 3). Your installer should discuss this with you.
4. Antenna In. This is an
5. Out To TV. This supplies the VHF signal to your TV.
6. Audio Out (L & R). These are audio outputs that may be used to connect your TV and VCR.
7. To TV. This is a standard video output terminal.
DSR470 User Guide | 33 |