Installation
Connections to Audio/Video Monitor
Complete the following steps if you only plan to connect the receiver to an audio/ video monitor:
•Using standard RCA-type audio/video cables, connect the top/left TV (VIDEO output) terminal on the rear panel of the receiver to the video input terminal on the monitor (or TV using the baseband inputs).
•Using standard RCA-type audio/video cables, connect the two bottom/left speaker (R and L) terminals on the back panel of the receiver to the audio input terminals on the monitor (or TV using the baseband inputs).
Connections to Audio/Video Monitor and VCR
Complete the following steps if you plan to connect the receiver to an audio/video monitor and VCR:
•Using standard RCA-type audio/video cables, connect the top/right TV (VIDEO output) terminal on the rear panel of the receiver to the video input terminal on the VCR.
•Using standard RCA-type audio/video cables, connect the two bottom/right speaker icon (R and L) terminals on the Rear Panel of the receiver to the audio input terminals on the VCR.
•Using standard RCA-type audio/video cables, connect the audio and video inputs on the audio/video monitor (or TV using baseband audio/video inputs) to the outputs on the VCR.
•If your entertainment center is enabled for Dolby Digital AC-3 Version 5.1 (six channel) surround sound, connect this port to one end of the orange RCA cable and the other end of the orange RCA cable to your surround sound processor.
After you complete the installation procedures, you may wish to use the on-screen menus to make adjustments to the receiver's operation.