Poulan 545047515 instruction manual Limbing and Pruning Important Points

Page 13

Using a log for support

2nd Cut

1st Cut

1st Cut

2nd Cut

Using a support stand

2nd Cut

1st Cut

1st Cut

2nd Cut

LIMBING AND PRUNING

WARNING: Be alert for and guard against kickback. Do not allow the moving chain to contact any other branches or objects at the nose of the guide bar when limbing or pruning. Allowing such contact can result in serious injury.

WARNING: Never climb into a tree to limb or prune. Do not stand on ladders, plat- forms, a log, or in any position which can cause you to lose your balance or control of the saw.

IMPORTANT POINTS

S Work slowly, keeping both hands firmly gripped on the saw. Maintain secure footing and balance.

SWatch out for springpoles. Springpoles are small size limbs which can catch the saw chain and whip toward you or pull you off bal- ance. Use extreme caution when cutting

small size limbs or slender material.

S Be alert for springback. Watch out for branches that are bent or under pressure. Avoid being struck by the branch or the saw when the tension in the wood fibers is released.

S Keep a clear work area. Frequently clear branches out of the way to avoid tripping over them.

LIMBING

SAlways limb a tree after it is cut down. Only then can limbing be done safely and prop-

erly.

SLeave the larger limbs underneath the felled

tree to support the tree as you work.

SStart at the base of the felled tree and work toward the top, cutting branches and limbs.

Remove small limbs with one cut.

SKeep the tree between you and the chain. Cut from the side of the tree opposite the branch you are cutting.

S Remove larger, supporting branches with the cutting techniques described in BUCK-

ING WITHOUT A SUPPORT.

SAlways use an overcut to cut small and free- ly hanging limbs. Undercutting could cause limbs to fall and pinch the saw.

PRUNING

WARNING: Limit pruning to limbs shoulder height or below. Do not cut if branches are higher than your shoulder. Get a professional to do the job.

SMake your first cut 1/3 of the way through the bottom of the limb.

SNext make a 2nd cut all the way through the limb. Then cut a third overcut leaving a 1 to 2 inch (2.5 to 5 cm) collar from the truck of the tree.

Second cut

Third cut

Collar

First cut

Pruning technique

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents 12/8/05 PP4218AVLAlways use two hands when operating the chain saw Using the chain sawStarting Reminder Plan AheadMaintain Your SAW in Good Working Order Operate Your SAW SafelyHandle Fuel with Caution KickbackReduce the Chance of Kickback Maintain ControlChain Brake and CKA Angle Kickback Safety FeaturesIf your hand slips off the front handlebar Adjusting Screw Tensioning Rack AssemblyAttaching the BAR & Chain If not Chain Tension Adjusting the tensionChecking the tension Operation BAR and Chain Lubrication Before Starting Engine Fueling EngineImportant Points to Remember Cation Always stop the engine before removing the oil capDifficult Starting or starting a flooded engine Starting a Warm EngineBraking function control Caution The chain brake must be Inertia activating function controlTree Felling Techniques Operating TipsFelling Large Trees Notch CUT and Felling the TreeCutting a Fallen Tree Bucking Using a LOG or Support StandImportant Points Types of Cutting Used for BuckingLimbing Limbing and Pruning Important PointsPruning Service Clean AIR Filter Inspect and Clean Unit and DecalsCleaning the Spark ARREST- ING Screen Check Fuel Mixture LevelStorage Engine Load Adjustment EngineOther Empty fuel tank and refill withTions The U.S. Environmental Protection Limited WarrantyConsequential Damages Electro

545047515 specifications

The Poulan 545047515 is a powerful and efficient chainsaw designed for both professional and personal use. This model is particularly renowned for its robust performance, making it an excellent choice for those who require a reliable tool for cutting firewood, trimming trees, or tackling more demanding yard work.

One of the standout features of the Poulan 545047515 is its 50cc two-stroke engine, which delivers ample power and speed for various cutting tasks. This engine design ensures that users can handle larger jobs with ease, making it suitable for both occasional homeowners and seasoned professionals. The chainsaw is capable of achieving a high level of performance while also offering great fuel efficiency, which is a crucial aspect for anyone who plans to use it for extended periods.

Another significant characteristic of this model is its durability. Constructed with high-quality materials, the Poulan 545047515 is engineered to withstand daily wear and tear. The alloy components resist corrosion, ensuring that the chainsaw will last for many years if maintained properly. This durability is complemented by an easy-access air filter and a tool-less fuel cap, which simplify maintenance and refueling tasks.

Safety features are also a top priority with the Poulan 545047515. The chainsaw comes equipped with a chain brake, which instantly stops the chain in the event of a kickback, ensuring user safety. Additionally, the ergonomic design helps reduce vibrations during operation, providing a more comfortable handling experience while minimizing fatigue during long periods of use.

The Poulan 545047515 also includes advanced technologies such as the OxyPower engine technology, which enhances fuel efficiency and reduces emissions. This makes it an environmentally-friendly choice as it adheres to modern regulations on exhaust emissions.

In summary, the Poulan 545047515 chainsaw boasts a powerful 50cc engine, a focus on durability, essential safety features, and advanced technologies that promote fuel efficiency and lower emissions. It is designed to meet the needs of both casual users and professionals, ensuring that it remains a popular choice in the chainsaw market today. Whether you're cutting firewood or handling heavy-duty tasks, the Poulan 545047515 is equipped to deliver reliable performance and ease of use.
Top Page Image Contents