Poulan 545047515 instruction manual Chain Tension, Checking the tension, Adjusting the tension

Page 7

5.Carefully remove the chain from the pack- age. Hold chain with the drive links as shown.

Tip of

Bar

CUTTERS MUST FACE IN

DIIRECTION OF ROTATION

Cutters

Depth Gauge

Drive Links

6.Place chain over and behind the clutch retainer, fitting the drive links in the clutch drum sprocket.

7.Fit bottom of drive links between the teeth in the sprocket in the nose of the guide bar.

8.Fit chain drive links into bar groove.

9.Pull guide bar forward until chain is snug in guide bar groove. Ensure all drive links are in the bar groove.

10.Hold guide bar against the saw frame and install clutch cover.

11.Install bar nuts and finger tighten only. Once the chain is tensioned, you will need to tighten bar nuts.

CHAIN TENSION

(Including units with chain already installed)

WARNING: Wear protective gloves when handling chain. The chain is sharp and can cut you even when it is not moving.

NOTE: When adjusting chain tension, make sure the bar nuts are finger tight only. Attempting to tension the chain when the bar nuts are tight can cause damage.

Checking the tension:

Use the screwdriver end of the chain adjust- ment tool (bar tool) to move chain around guide bar. If the chain does not rotate, it is too tight. If the chain is too loose, it will sag below the bar.

Guide

 

Bar

 

Chain Adjustment

Bar Nuts

Tool

(Bar Tool)

 

Adjusting the tension:

Chain tension is very important. Chains stretch during use. This is especially true during the first few times you use your saw. Always check chain tension each time you use and refuel your saw.

An adjusting screw (located on the guide bar) is used to adjust the tension of the chain (see illustration).

1.Turn adjusting screw clockwise until chain solidly contacts bottom of guide bar rail.

Guide bar

Adjusting

Screw

2.Using bar tool, roll chain around guide bar to ensure all links are in bar groove.

3.Lift up tip of guide bar to check for sag. Release tip of guide bar, then turn ad- justing screw clockwise until sag does not exist.

4.While lifting tip of guide bar, tighten bar nuts securely with the bar tool.

Bar Nuts

5.Use the screwdriver end of the bar tool to move chain around guide bar.

6.If chain does not rotate, it is too tight. Slightly loosen bar nuts and loosen chain by turning the adjusting screw. Retighten bar nuts.

7.If chain is too loose, it will sag below the guide bar. DO NOT operate the saw if the chain is loose.

WARNING: If the saw is operated with a loose chain, the chain could jump off the guide bar and result in serious injury.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents 12/8/05 PP4218AVLPlan Ahead Using the chain sawAlways use two hands when operating the chain saw Starting ReminderKickback Operate Your SAW SafelyMaintain Your SAW in Good Working Order Handle Fuel with CautionReduce the Chance of Kickback Maintain ControlChain Brake and CKA Angle Kickback Safety FeaturesIf your hand slips off the front handlebar Adjusting Screw Tensioning Rack AssemblyAttaching the BAR & Chain If not Chain Tension Adjusting the tensionChecking the tension Operation Cation Always stop the engine before removing the oil cap Before Starting Engine Fueling EngineBAR and Chain Lubrication Important Points to RememberInertia activating function control Starting a Warm EngineDifficult Starting or starting a flooded engine Braking function control Caution The chain brake must beNotch CUT and Felling the Tree Operating TipsTree Felling Techniques Felling Large TreesTypes of Cutting Used for Bucking Bucking Using a LOG or Support StandCutting a Fallen Tree Important PointsLimbing Limbing and Pruning Important PointsPruning Service Check Fuel Mixture Level Inspect and Clean Unit and DecalsClean AIR Filter Cleaning the Spark ARREST- ING ScreenStorage Empty fuel tank and refill with Load Adjustment EngineEngine OtherTions The U.S. Environmental Protection Limited WarrantyConsequential Damages Electro

545047515 specifications

The Poulan 545047515 is a powerful and efficient chainsaw designed for both professional and personal use. This model is particularly renowned for its robust performance, making it an excellent choice for those who require a reliable tool for cutting firewood, trimming trees, or tackling more demanding yard work.

One of the standout features of the Poulan 545047515 is its 50cc two-stroke engine, which delivers ample power and speed for various cutting tasks. This engine design ensures that users can handle larger jobs with ease, making it suitable for both occasional homeowners and seasoned professionals. The chainsaw is capable of achieving a high level of performance while also offering great fuel efficiency, which is a crucial aspect for anyone who plans to use it for extended periods.

Another significant characteristic of this model is its durability. Constructed with high-quality materials, the Poulan 545047515 is engineered to withstand daily wear and tear. The alloy components resist corrosion, ensuring that the chainsaw will last for many years if maintained properly. This durability is complemented by an easy-access air filter and a tool-less fuel cap, which simplify maintenance and refueling tasks.

Safety features are also a top priority with the Poulan 545047515. The chainsaw comes equipped with a chain brake, which instantly stops the chain in the event of a kickback, ensuring user safety. Additionally, the ergonomic design helps reduce vibrations during operation, providing a more comfortable handling experience while minimizing fatigue during long periods of use.

The Poulan 545047515 also includes advanced technologies such as the OxyPower engine technology, which enhances fuel efficiency and reduces emissions. This makes it an environmentally-friendly choice as it adheres to modern regulations on exhaust emissions.

In summary, the Poulan 545047515 chainsaw boasts a powerful 50cc engine, a focus on durability, essential safety features, and advanced technologies that promote fuel efficiency and lower emissions. It is designed to meet the needs of both casual users and professionals, ensuring that it remains a popular choice in the chainsaw market today. Whether you're cutting firewood or handling heavy-duty tasks, the Poulan 545047515 is equipped to deliver reliable performance and ease of use.
Top Page Image Contents