Poulan 530163653 Chain Sharpening, Ignition Timing, Spark Plug, Need ASSISTANCE?

Page 15

Replace guide bar when the groove is worn, the guide bar is bent or cracked, or when exce-

ssheating or burring of the rails occurs. If re- placement is necessary, use only the guide bar specified for your saw in the repair parts list or on the decal located on the chain saw.

CHAIN SHARPENING

Chain sharpening is a complicated task that requires special tools. We recommended you refer chain sharpening to a professional chain sharpener.

IGNITION TIMING

Ignition timing is fixed and nonadjustable.

SPARK PLUG

The spark plug should be replaced each year to ensure the engine starts easier and runs better.

1.Loosen 3 screws on cylinder cover.

2.Remove the cylinder cover.

3.Pull off the spark plug boot.

4.Remove spark plug from cylinder and dis- card.

5.Replace with Champion RCJ--7Y spark plug and tighten securely with a 3/4 inch socket wrench. Spark plug gap should be 0.025 inches.

6.Reinstall the spark plug boot.

7.Reinstall the cylinder cover and 3 screws. Tighten securely.

Screws

 

 

 

Cylinder

Spark

 

 

 

 

 

 

 

 

Cover

 

 

 

 

 

 

 

 

 

 

Plug Boot

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Spark

 

 

 

 

 

Plug

 

 

 

 

 

STORAGE

WARNING: Stop engine and allow to cool, and secure the unit before storing or transporting in a vehicle. Store unit and fuel in an area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc. Store unit with all guards in place. Position so that any sharp object cannot accidentally cause injury to passersby. Store the unit out of reach of children.

SBefore storing, drain all fuel from the unit.

Start engine and allow to run until it stops.

SClean the unit before storing. Pay particu- lar attention to the air intake area, keeping it free of debris. Use a mild detergent and sponge to clean the plastic surfaces.

SDo not store the unit or fuel in a closed area where fuel vapors can reach sparks or an open flame from hot water heaters, electric motors or switches, furnaces, etc.

SStore in a dry area out of the reach of chil- dren.

CAUTION: It is important to prevent gum deposits from forming in essential fuel system parts such as the carburetor, fuel filter, fuel hose, or fuel tank during storage. Alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to fuel mixture separation and formation of acids during storage. Acidic gas can damage the engine.

NEED ASSISTANCE?

Call 1--800--554--6723.

NEED SERVICE PART?

Conact your authorized service dealer.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Manual de Instrucciones Manuel d’Instructions Plan Ahead Kickback Operate Your SAW SafelyMaintain Your SAW in Good Working Order Handle Fuel with CautionYour left arm straight with the elbow locked Kickback Safety FeaturesReduce the Chance Kickback Maintain ControlChain Brake and CKA Angle Computed kickback angle CKA TableFront Hand Guard, designed to reduce Attaching the BAR & Chain If not Tip BarCutters Depth Gauge Drive Links Adjusting the tension Chain Tension Including units with chain already installedChecking the tension Throttle Lockout ON/STOP SwitchKnow Your SAW Throttle TriggerHandle Right foot through rear handle Fueling EngineBAR and Chain Lubrication Important Points to RememberInertia activating function control Starting a Warm EngineDifficult Starting or starting a flooded engine Braking function control Caution The chain brake must beGine can result Tree Felling TechniquesFelling Large Trees Notch CUT and Felling the TreeBucking Without a Support Bucking Using a LOG or Support StandCutting a Fallen Tree Types of Cutting Used for BuckingAIR Filter PruningLimbing and Pruning Important Points LimbingInspect Muffler and Spark Arresting Screen Cleaning the air filterCarburetor Adjustment BAR MaintenanceSpark Plug Need Service PART?Chain Sharpening Ignition TimingTroubleshooting Table Cause Remedy Ligations The U. S. Environmental Your Warranty Rights and OB

530163653 specifications

The Poulan 530163653 is a versatile and efficient tool designed to meet a range of outdoor maintenance needs. Whether you are a professional landscaper or a casual gardener, this equipment is engineered to provide excellent performance and reliability.

One of the standout features of the Poulan 530163653 is its powerful engine. Equipped with a robust, sturdy motor, it delivers consistent power for various tasks. This ensures that you can tackle everything from heavy-duty cutting to light trimming without compromising efficiency. The engine is designed to handle different types of vegetation, making it a versatile addition to your toolkit.

Another noteworthy aspect of this model is its lightweight design. Weighing significantly less than comparable models, the Poulan 530163653 reduces user fatigue, allowing for longer operating periods without discomfort. This feature is particularly appreciated by those who must perform extensive landscaping work or maintenance over large areas.

In terms of user comfort, the Poulan 530163653 has an ergonomically designed handle. This design promotes a natural grip and reduces strain during extended use. Additionally, the anti-vibration technology integrated into the equipment minimizes hand fatigue and provides a smoother operation.

Durability is at the core of the Poulan 530163653's design. The materials used in its construction are resistant to wear and tear, ensuring that the tool can withstand challenging conditions and frequent use. Moreover, the ease of maintenance is another key characteristic, as the equipment is designed for simple cleaning and repairs, allowing for longer service life.

The Poulan 530163653 also features advanced cutting technologies, including a dual-line trimming system that enhances cutting efficiency. This mechanism allows for a wider cutting path, ensuring that you can complete jobs more quickly and effectively. The ability to adjust the cutting height gives users greater control over their landscaping tasks.

In conclusion, the Poulan 530163653 stands out in the market for its powerful engine, lightweight construction, ergonomic design, and advanced cutting technologies. Its durability and ease of maintenance further enhance its appeal, making it a reliable choice for both professional and home use. Whether you're tackling grass trimming, hedge shaping, or clearing brush, the Poulan 530163653 delivers the performance and efficiency required for a range of outdoor tasks.
Top Page Image Contents