Poulan 530163653 Attaching the BAR & Chain If not, Tip Bar, Cutters Depth Gauge Drive Links

Page 6

symptoms occur such as numbness, pain, loss of strength, change in skin color or texture, or loss of feeling in the fingers, hands, or joints, discontinue the use of this tool and seek medical attention. An anti-vibration system does not guarantee the avoidance of these problems. Users who operate power tools on a continual and regular basis must monitor closely their physical condition and the condition of this tool.

SPECIAL NOTICE: Your saw is equipped with a temperature limiting muffler and spark arresting screen which meets the requirements of California Codes 4442 and 4443. All U.S. forest land and the states of California, Idaho, Maine, Minnesota, New Jersey, Oregon, and Washington require by law that many internal combustion engines to be equipped with a spark arresting screen. If you operate a chain saw in a state or locale where such regulations exist, you are legally responsible for maintaining the operating condition of these parts. Failure to do so is a violation of the law. Refer to the SERVICE section for maintenance of the spark arresting screen.

Failure to follow all Safety Rules and Precau- tions can result in serious injury. If situations occur which are not covered in this manual, use care and good judgement. If you need assistance, contact your authorized service dealer or call 1-800--554--6723.

STANDARDS: This saw is listed by Under- writer’s Laboratories, Inc., and the Canadian Standards Association in accordance with:

ANSI B175.1-2000American National Standard for Powered Tools -- Gasoline Powered Chain Saw -- Safety Requirements

CSA Z62.1-1995Chain Saws -- Occupa- tional Health and Safety

CSA Z62.3-1996Chain Saw Kickback Oc- cupational Health and Safety

Protective gloves (not provided) should be worn during assembly.

ATTACHING THE BAR & CHAIN (If not

already attached)

WARNING: If received assembled, repeat all steps to ensure your saw is prop- erly assembled and all fasteners are secure. Always wear gloves when handling the chain. The chain is sharp and can cut you even when it is not moving!

1.Loosen and remove the chain brake nuts and the chain brake from the saw.

2.Remove the plastic shipping spacer (if present).

Location of shipping spacer

 

 

 

 

 

 

 

 

 

 

 

Chain Brake

Chain Brake

Nuts

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Bar Tool

3.Turn adjusting screw on bar counter- clockwise to move the tensioning rack as far as it will go toward the front of the bar.

Adjusting

Screw

Tensioning Rack

4.Slide the bar behind clutch drum until bar stops against clutch drum sprocket.

Mount the Bar

5.Prepare the chain by checking the proper direction. Without following the illustration it is easy to place the chain on the saw in the wrong direction. Use the illustration of the chain to determine the proper direction.

Tip of

Bar

CUTTERS MUST FACE IN

DIIRECTION OF ROTATION

Cutters

Depth Gauge

 

 

 

 

 

 

 

 

Drive Links

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Manual de Instrucciones Manuel d’Instructions Plan Ahead Handle Fuel with Caution Operate Your SAW SafelyMaintain Your SAW in Good Working Order KickbackMaintain Control Kickback Safety FeaturesReduce the Chance Kickback Your left arm straight with the elbow lockedChain Brake and CKA Angle Computed kickback angle CKA TableFront Hand Guard, designed to reduce Attaching the BAR & Chain If not Tip BarCutters Depth Gauge Drive Links Adjusting the tension Chain Tension Including units with chain already installedChecking the tension Throttle Trigger ON/STOP SwitchKnow Your SAW Throttle LockoutImportant Points to Remember Fueling EngineBAR and Chain Lubrication Handle Right foot through rear handleBraking function control Caution The chain brake must be Starting a Warm EngineDifficult Starting or starting a flooded engine Inertia activating function controlNotch CUT and Felling the Tree Tree Felling TechniquesFelling Large Trees Gine can resultTypes of Cutting Used for Bucking Bucking Using a LOG or Support StandCutting a Fallen Tree Bucking Without a SupportLimbing PruningLimbing and Pruning Important Points AIR FilterBAR Maintenance Cleaning the air filterCarburetor Adjustment Inspect Muffler and Spark Arresting ScreenIgnition Timing Need Service PART?Chain Sharpening Spark PlugTroubleshooting Table Cause Remedy Your Warranty Rights and OB Ligations The U. S. Environmental

530163653 specifications

The Poulan 530163653 is a versatile and efficient tool designed to meet a range of outdoor maintenance needs. Whether you are a professional landscaper or a casual gardener, this equipment is engineered to provide excellent performance and reliability.

One of the standout features of the Poulan 530163653 is its powerful engine. Equipped with a robust, sturdy motor, it delivers consistent power for various tasks. This ensures that you can tackle everything from heavy-duty cutting to light trimming without compromising efficiency. The engine is designed to handle different types of vegetation, making it a versatile addition to your toolkit.

Another noteworthy aspect of this model is its lightweight design. Weighing significantly less than comparable models, the Poulan 530163653 reduces user fatigue, allowing for longer operating periods without discomfort. This feature is particularly appreciated by those who must perform extensive landscaping work or maintenance over large areas.

In terms of user comfort, the Poulan 530163653 has an ergonomically designed handle. This design promotes a natural grip and reduces strain during extended use. Additionally, the anti-vibration technology integrated into the equipment minimizes hand fatigue and provides a smoother operation.

Durability is at the core of the Poulan 530163653's design. The materials used in its construction are resistant to wear and tear, ensuring that the tool can withstand challenging conditions and frequent use. Moreover, the ease of maintenance is another key characteristic, as the equipment is designed for simple cleaning and repairs, allowing for longer service life.

The Poulan 530163653 also features advanced cutting technologies, including a dual-line trimming system that enhances cutting efficiency. This mechanism allows for a wider cutting path, ensuring that you can complete jobs more quickly and effectively. The ability to adjust the cutting height gives users greater control over their landscaping tasks.

In conclusion, the Poulan 530163653 stands out in the market for its powerful engine, lightweight construction, ergonomic design, and advanced cutting technologies. Its durability and ease of maintenance further enhance its appeal, making it a reliable choice for both professional and home use. Whether you're tackling grass trimming, hedge shaping, or clearing brush, the Poulan 530163653 delivers the performance and efficiency required for a range of outdoor tasks.
Top Page Image Contents