Poulan 530163653 Reduce the Chance Kickback, Maintain Control, Kickback Safety Features

Page 4

Avoid Obstructions

Clear The Working Area

REDUCE THE CHANCE OF

KICKBACK

S Recognize that kickback can happen. With a basic understanding of kickback, you can reduce the element of surprise which contributes to accidents.

SNever let the moving chain contact any ob-

ject at the tip of the guide bar.

SKeep the working area free from obstruc- tions such as other trees, branches, rocks, fences, stumps, etc. Eliminate or avoid any obstruction that your saw chain could hit while you are cutting. When cutting a branch, do not let the guide bar contact branch or other objects around it.

SKeep your saw chain sharp and properly tensioned. A loose or dull chain can in- crease the chance of kickback occurring. Follow manufacturer ’s chain sharpening and maintenance instructions. Check ten-

sion at regular intervals with the engine stopped, never with the engine running. Make sure the chain brake nuts are se- curely tightened after tensioning the chain.

SBegin and continue cutting at full speed. If

the chain is moving at a slower speed, there is greater chance of kickback occur- ring.

SCut one log at a time.

S Use extreme caution when re-entering a previous cut.

SDo not attempt cuts starting with the tip of

the bar (plunge cuts).

SWatch for shifting logs or other forces that could close a cut and pinch or fall into

chain.

S Use the Reduced--Kickback Guide Bar and Low--Kickback Chain specified for your saw.

MAINTAIN CONTROL

Stand to the left of the saw

Thumb on underside of handlebar

Never reverse hand positions

Elbow locked

Thumb on underside of handlebar

SKeep a good, firm grip on the saw with both hands when the engine is running and don’t let go. A firm grip will help you reduce kickback and maintain control of the saw. Keep the fingers of your left hand encir- cling and your left thumb under the front handlebar. Keep your right hand com- pletely around the rear handle whether your are right handed or left handed. Keep

your left arm straight with the elbow locked.

SPosition your left hand on the front handle- bar so it is in a straight line with your right

hand on the rear handle when making bucking cuts. Never reverse right and left hand positions for any type of cutting.

SStand with your weight evenly balanced on

both feet.

SStand slightly to the left side of the saw to

keep your body from being in a direct line with the cutting chain.

SDo not overreach. You could be drawn or

thrown off balance and lose control of the saw.

SDo not cut above shoulder height. It is diffi- cult to maintain control of saw above shoulder height.

KICKBACK SAFETY FEATURES

WARNING: The following features are included on your saw to help reduce the hazard of kickback; however, such features will not totally eliminate this danger. As a chain saw user, do not rely only on safety de- vices. You must follow all safety precau- tions, instructions, and maintenance in this manual to help avoid kickback and other forces which can result in serious injury.

SReduced--Kickback Guide Bar, designed with a small radius tip which reduces the size of the kickback danger zone on the bar tip. A Reduced--Kickback Guide Bar has been demonstrated to significantly re- duce the number and seriousness of kick- backs when tested in accordance with safety requirements for gasoline powered

chain saws as set by ANSI B175.1.

Reduced Kickback Symmetrical Guide Bar

Small Radius Tip

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Manual de Instrucciones Manuel d’Instructions Plan Ahead Operate Your SAW Safely Maintain Your SAW in Good Working OrderHandle Fuel with Caution KickbackKickback Safety Features Reduce the Chance KickbackMaintain Control Your left arm straight with the elbow lockedComputed kickback angle CKA Table Chain Brake and CKA AngleFront Hand Guard, designed to reduce Tip Bar Attaching the BAR & Chain If notCutters Depth Gauge Drive Links Chain Tension Including units with chain already installed Adjusting the tensionChecking the tension ON/STOP Switch Know Your SAWThrottle Trigger Throttle LockoutFueling Engine BAR and Chain LubricationImportant Points to Remember Handle Right foot through rear handleStarting a Warm Engine Difficult Starting or starting a flooded engineBraking function control Caution The chain brake must be Inertia activating function controlTree Felling Techniques Felling Large TreesNotch CUT and Felling the Tree Gine can resultBucking Using a LOG or Support Stand Cutting a Fallen TreeTypes of Cutting Used for Bucking Bucking Without a SupportPruning Limbing and Pruning Important PointsLimbing AIR FilterCleaning the air filter Carburetor AdjustmentBAR Maintenance Inspect Muffler and Spark Arresting ScreenNeed Service PART? Chain SharpeningIgnition Timing Spark PlugTroubleshooting Table Cause Remedy Your Warranty Rights and OB Ligations The U. S. Environmental

530163653 specifications

The Poulan 530163653 is a versatile and efficient tool designed to meet a range of outdoor maintenance needs. Whether you are a professional landscaper or a casual gardener, this equipment is engineered to provide excellent performance and reliability.

One of the standout features of the Poulan 530163653 is its powerful engine. Equipped with a robust, sturdy motor, it delivers consistent power for various tasks. This ensures that you can tackle everything from heavy-duty cutting to light trimming without compromising efficiency. The engine is designed to handle different types of vegetation, making it a versatile addition to your toolkit.

Another noteworthy aspect of this model is its lightweight design. Weighing significantly less than comparable models, the Poulan 530163653 reduces user fatigue, allowing for longer operating periods without discomfort. This feature is particularly appreciated by those who must perform extensive landscaping work or maintenance over large areas.

In terms of user comfort, the Poulan 530163653 has an ergonomically designed handle. This design promotes a natural grip and reduces strain during extended use. Additionally, the anti-vibration technology integrated into the equipment minimizes hand fatigue and provides a smoother operation.

Durability is at the core of the Poulan 530163653's design. The materials used in its construction are resistant to wear and tear, ensuring that the tool can withstand challenging conditions and frequent use. Moreover, the ease of maintenance is another key characteristic, as the equipment is designed for simple cleaning and repairs, allowing for longer service life.

The Poulan 530163653 also features advanced cutting technologies, including a dual-line trimming system that enhances cutting efficiency. This mechanism allows for a wider cutting path, ensuring that you can complete jobs more quickly and effectively. The ability to adjust the cutting height gives users greater control over their landscaping tasks.

In conclusion, the Poulan 530163653 stands out in the market for its powerful engine, lightweight construction, ergonomic design, and advanced cutting technologies. Its durability and ease of maintenance further enhance its appeal, making it a reliable choice for both professional and home use. Whether you're tackling grass trimming, hedge shaping, or clearing brush, the Poulan 530163653 delivers the performance and efficiency required for a range of outdoor tasks.
Top Page Image Contents