Poulan 530163653 instruction manual Checking the tension, Adjusting the tension

Page 7

6.Place the chain over and behind the clutch, fitting the drive links in the clutch drum sprocket.

Place chain onto the sprocket

7.Fit bottom of drive links between the teeth in the sprocket in the nose of the guide bar.

8.Fit chain drive links in to bar groove.

9.Pull the bar forward until the chain is snug in the groove of the bar. Ensure all drive links are in the bar groove.

10.Hold guide bar against the saw frame and install the chain brake.

11.Replace the chain brake nuts and tighten finger tight. Once the chain is tensioned you will need to tighten chain brake nuts.

CHAIN TENSION (Including units with chain already installed)

NOTE: When adjusting chain tension, make sure the chain brake nuts are finger tight only. Attempting to tension the chain when the chain brake nuts are tight can cause damage.

Checking the tension:

Use the screwdriver end of the chain adjust- ment tool (bar tool) to move the chain around the bar. If the chain does not rotate, it is too tight. If too loose, the chain will sag below the bar.

Chain Brake Nuts

Chain Adjustment

Tool (Bar Tool)

7

Adjusting the tension:

Chain tension is very important. Chain stretches during use. This is especially true during the first few times you use your saw. Always check chain tension each time you use and refuel your saw.

An adjusting screw (located on the guide bar) is used to adjust the tension of the chain (see illustration).

STurn adjusting screw clockwise until chain solidly contacts bottom of guide bar rail.

Guide bar

Adjusting

Screw

SUsing the screwdriver end of the bar tool, roll chain around guide bar to ensure all

links are in bar groove.

SLift up tip of guide bar to check for sag. Re- lease tip of guide bar, then turn adjusting screw until sag does not exist.

STighten chain brake nuts securely with the bar tool.

Chain Brake

Nuts

SUse the screwdriver end of the bar tool to move chain around guide bar.

S If chain does not rotate, it is too tight. Slightly loosen chain brake nuts and loos- en chain by turning the adjusting screw. Retighten chain brake nuts.

SIf chain is too loose, it will sag below the guide bar. DO NOT operate the saw if the chain is loose.

WARNING: If the saw is operated with a loose chain, the chain could jump off the guide bar and result in serious injury.

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Manual de Instrucciones Manuel d’Instructions Plan Ahead Kickback Operate Your SAW SafelyMaintain Your SAW in Good Working Order Handle Fuel with CautionYour left arm straight with the elbow locked Kickback Safety FeaturesReduce the Chance Kickback Maintain ControlComputed kickback angle CKA Table Chain Brake and CKA AngleFront Hand Guard, designed to reduce Tip Bar Attaching the BAR & Chain If notCutters Depth Gauge Drive Links Chain Tension Including units with chain already installed Adjusting the tensionChecking the tension Throttle Lockout ON/STOP SwitchKnow Your SAW Throttle TriggerHandle Right foot through rear handle Fueling EngineBAR and Chain Lubrication Important Points to RememberInertia activating function control Starting a Warm EngineDifficult Starting or starting a flooded engine Braking function control Caution The chain brake must beGine can result Tree Felling TechniquesFelling Large Trees Notch CUT and Felling the TreeBucking Without a Support Bucking Using a LOG or Support StandCutting a Fallen Tree Types of Cutting Used for BuckingAIR Filter PruningLimbing and Pruning Important Points LimbingInspect Muffler and Spark Arresting Screen Cleaning the air filterCarburetor Adjustment BAR MaintenanceSpark Plug Need Service PART?Chain Sharpening Ignition TimingTroubleshooting Table Cause Remedy Ligations The U. S. Environmental Your Warranty Rights and OB

530163653 specifications

The Poulan 530163653 is a versatile and efficient tool designed to meet a range of outdoor maintenance needs. Whether you are a professional landscaper or a casual gardener, this equipment is engineered to provide excellent performance and reliability.

One of the standout features of the Poulan 530163653 is its powerful engine. Equipped with a robust, sturdy motor, it delivers consistent power for various tasks. This ensures that you can tackle everything from heavy-duty cutting to light trimming without compromising efficiency. The engine is designed to handle different types of vegetation, making it a versatile addition to your toolkit.

Another noteworthy aspect of this model is its lightweight design. Weighing significantly less than comparable models, the Poulan 530163653 reduces user fatigue, allowing for longer operating periods without discomfort. This feature is particularly appreciated by those who must perform extensive landscaping work or maintenance over large areas.

In terms of user comfort, the Poulan 530163653 has an ergonomically designed handle. This design promotes a natural grip and reduces strain during extended use. Additionally, the anti-vibration technology integrated into the equipment minimizes hand fatigue and provides a smoother operation.

Durability is at the core of the Poulan 530163653's design. The materials used in its construction are resistant to wear and tear, ensuring that the tool can withstand challenging conditions and frequent use. Moreover, the ease of maintenance is another key characteristic, as the equipment is designed for simple cleaning and repairs, allowing for longer service life.

The Poulan 530163653 also features advanced cutting technologies, including a dual-line trimming system that enhances cutting efficiency. This mechanism allows for a wider cutting path, ensuring that you can complete jobs more quickly and effectively. The ability to adjust the cutting height gives users greater control over their landscaping tasks.

In conclusion, the Poulan 530163653 stands out in the market for its powerful engine, lightweight construction, ergonomic design, and advanced cutting technologies. Its durability and ease of maintenance further enhance its appeal, making it a reliable choice for both professional and home use. Whether you're tackling grass trimming, hedge shaping, or clearing brush, the Poulan 530163653 delivers the performance and efficiency required for a range of outdoor tasks.
Top Page Image Contents