Poulan 530088788 operating instructions Checking the tension

Page 6

far as it will go to the rear. This should allow the pin to be near the correct position. Fur- ther adjustment may be necessary as you mount the bar.

SMount the bar as illustrated.

SSlide the bar toward the rear of the saw as far as possible.

SPrepare the chain by checking the proper direction. Without following the illustration it is easy to place the chain on the saw the wrong direction. Use the illustration of the chain to determine the proper direction.

SPlace the chain onto the sprocket located behind the clutch drum (see illustration). Fit the chain between the teeth in the

sprocket.

SStart at the top of the bar and fit chain into

groove around the guide bar.

SAfter chain is installed, pull bar forward un-

til chain is snug in the groove of the bar.

SHold guide bar against the saw frame mak- ing sure the adjusting pin is aligned with the hole in the bar. Remember this pin

moves the bar forward and backward as screw is turned. Install the chain brake.

SReplace the chain brake nuts and tighten finger tight. Once the chain is tensioned you will need to tighten chain brake nuts.

Install the bar

Tip of Bar

Proper chain direction

Place chain onto the sprocket

CHAIN TENSION (Including units with chain already installed)

NOTE: When adjusting chain tension, make sure the bar nuts are finger tight only. Attempting to tension the chain when the bar nuts are tight can cause damage.

Checking the tension:

Use the screwdriver end of the chain adjust- ment tool (bar tool) to move the chain around the bar. If the chain does not rotate, it is too tight. If too loose, the chain will sag below the bar.

Adjusting the tension:

Chain tension is very important. Chain stretches during use. This is especially true during the first few times you use your saw. Always check chain tension each time you use and refuel your saw.

Adjusting

Screw

You can adjust chain tension by loosening the bar clamp nuts and turning adjusting screw 1/4 of a turn while lifting up on the bar.

SIf chain is too tight, turn adjusting screw 1/4 turn counterclockwise.

SIf chain is too loose, turn adjusting screw 1/4 turn clockwise.

SLift up the tip of the bar and tighten the bar clamp nuts with the combination screw-

driver/wrench.

SRecheck chain tension. Tension is correct when chain does not sag below the bar but still can be moved around the bar.

WARNING: If the chain is operated with a loose chain, the chain could jump off the guide bar and result in serious injury.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents 3450 Maintain Your SAW in Good Working Order Plan AheadOperate Your SAW Safely Handle Fuel with CautionMaintain Control KickbackReduce the Chance Kickback Ened after tensioning the chainKickback Safety Features Chain BrakeElbow locked Thumb on underside of handlebar Safety Notice Exposure to Back toward the operatorChecking the tension Throttle Trigger ON/STOP SwitchKnow Your SAW Throttle LOCK-OUTBAR and Chain Lubrication ON/STOP SwitchFueling Engine Important Points to RememberStarting a Warm Engine Important PointsNotch CUT and Felling the Tree Tree Felling TechniquesFelling Large Trees NecessaryTypes of Cutting Used for Bucking Bucking Using a LOG or SUP- Port StandCutting a Fallen Tree Bucking Without a SupportLimbing PruningLimbing and Pruning Important Points AIR FilterCarburetor Adjustments BAR MaintenanceCleaning the Spark ARREST- ING Screen Inspect Muffler and Spark Arresting ScreenStorage Troubleshooting Table Cause RemedyMotors or switches, furnaces, etc CallElectrolux Home Products North AMERICA, Division of WCI Out Ligations The U. S. Environmental

530088788 specifications

The Poulan 530088788 is a versatile and robust chainsaw designed to deliver reliable performance for both novice users and seasoned professionals. Known for its durability and efficiency, this chainsaw has become a popular choice among homeowners and landscapers alike.

One of the standout features of the Poulan 530088788 is its powerful engine. The chainsaw is equipped with a potent 50cc two-stroke engine that provides ample power for cutting through a variety of woods. This engine strikes a balance between efficiency and output, ensuring that users can tackle larger cutting tasks without experiencing excessive fatigue.

In terms of design, the Poulan 530088788 is built for comfort. It comes with an ergonomic handle that reduces vibration during operation, allowing for extended periods of use without discomfort. The adjustable chain tensioning system is another notable feature, enabling users to make quick adjustments to the chain without the need for additional tools, enhancing the overall user experience.

Safety is a paramount consideration with chainsaws, and the Poulan 530088788 incorporates multiple safety features. It features a chain brake that can be easily activated in case of kickback, providing peace of mind to users. The chainsaw also includes a safety throttle lock that prevents accidental starts, ensuring that the user has control at all times.

In terms of technologies, the Poulan 530088788 utilizes an advanced air filtration system that helps extend the life of the equipment. This feature reduces the amount of dust and debris that can enter the engine, leading to improved performance and longevity. Moreover, the chainsaw is designed for easy starting, courtesy of its spring-assisted starting system, which minimizes the effort required to get the engine running.

Additionally, the Poulan 530088788 comes with a 20-inch guide bar. This length allows for cutting larger logs while maintaining precision. The inclusion of a high-performance chain further enhances cutting efficiency, enabling users to quickly and effectively tackle their tasks.

In conclusion, the Poulan 530088788 is a feature-rich chainsaw that offers a perfect combination of power, safety, and ease of use. Whether you are trimming branches, felling trees, or tackling firewood, this chainsaw has the capabilities to get the job done efficiently and effectively. Its thoughtful design and reliable performance make it a worthy investment for anyone in need of a dependable cutting tool.
Top Page Image Contents