Fueling Engine, BAR and Chain Lubrication

FUELING ENGINE

This engine is certified to operate on unleaded gasoline. Before operation, gasoline must be mixed with a good quality 2-cycle air-cooled engine oil. We recommend Poulan or Poulan ProR brand oil. If you do not use this oil, use a good quality 2-cycle air-cooled oil designed to be mixed at a ratio of 40:1 (A 40:1 ratio is obtained by mixing 3.2 onces of oil with 1 gallon of unleaded gasoline). DO NOT USE automotive or boat oil. These oils will cause engine damage. When mixing fuel follow the instructions printed on the container. Always read and follow the safety rules listed under

HANDLE FUEL WITH CAUTION.

BAR AND CHAIN LUBRICATION

The bar and chain require continuous lu- brication. Lubrication is provided by the auto- matic oiler system when the oil tank is kept filled. Lack of oil will quickly ruin the bar and chain. Too little oil will cause overheating shown by smoke coming from the chain and/ or discoloration of the bar.

In freezing weather oil will thicken, making it necessary to thin bar and chain oil with a small amount (5 to 10%) of #1 Diesel Fuel or kerosene. Bar and chain oil must be free flowing for the oil system to pump enough oil for adequate lubrication.

Genuine Poulan or Poulan ProR bar and chain oil is recommended to protect your unit against excessive wear from heat and friction. Poulan or Poulan ProR oil resists high temperature thinning. If Poulan or Poulan ProR bar and chain oil is not available, use a good grade SAE 30 oil.

SNever use waste oil for bar and chain lubri- cation.

S Always stop the engine before removing the oil cap.

Oil Cap

Fuel mix cap

WARNING: The chain must not move when the engine runs at idle speed. If the chain moves at idle speed refer to CAR- BURETOR ADJUSTMENT within this manual. Avoid contact with the muffler. A hot muffler can cause serious burns.

To stop the engine move the ON/STOP switch to the STOP position.

To start the engine hold the saw firmly on the ground as illustrated. Make sure the chain is free to turn without contacting any object.

Use only 15”--18” of rope per pull.

Hold saw firmly while pulling starter rope. Starter rope handle

Left hand on front

handle

Right foot through rear handle

IMPORTANT POINTS TO REMEMBER

When pulling the starter rope, do not use the full extent of the rope as this can cause the rope to break. Do not let starter rope snap back. Hold the handle and let the rope rewind slowly.

For cold weather starting, start the unit at FULL CHOKE; allow the engine to warm up before squeezing the throttle trigger.

NOTE: Do not cut material with the choke/ fast idle lever at the FULL CHOKE position.

STARTING A COLD ENGINE (or a warm engine after running out of fuel)

SMove ON/STOP switch to the ON position. S Pull the choke/fast idle lever out to the full

extent.

ON/STOP	ON
SWITCH

IMPORTANT

Experience indicates that alcohol--blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage for 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season. See STORAGE section for addi- tional information.

STOP

CHOKE/FAST IDLE LEVER

(SIDE VIEW)

Choke/Fast OFF FULL Idle Lever

530088788 specifications

The Poulan 530088788 is a versatile and robust chainsaw designed to deliver reliable performance for both novice users and seasoned professionals. Known for its durability and efficiency, this chainsaw has become a popular choice among homeowners and landscapers alike.

One of the standout features of the Poulan 530088788 is its powerful engine. The chainsaw is equipped with a potent 50cc two-stroke engine that provides ample power for cutting through a variety of woods. This engine strikes a balance between efficiency and output, ensuring that users can tackle larger cutting tasks without experiencing excessive fatigue.

In terms of design, the Poulan 530088788 is built for comfort. It comes with an ergonomic handle that reduces vibration during operation, allowing for extended periods of use without discomfort. The adjustable chain tensioning system is another notable feature, enabling users to make quick adjustments to the chain without the need for additional tools, enhancing the overall user experience.

Safety is a paramount consideration with chainsaws, and the Poulan 530088788 incorporates multiple safety features. It features a chain brake that can be easily activated in case of kickback, providing peace of mind to users. The chainsaw also includes a safety throttle lock that prevents accidental starts, ensuring that the user has control at all times.

In terms of technologies, the Poulan 530088788 utilizes an advanced air filtration system that helps extend the life of the equipment. This feature reduces the amount of dust and debris that can enter the engine, leading to improved performance and longevity. Moreover, the chainsaw is designed for easy starting, courtesy of its spring-assisted starting system, which minimizes the effort required to get the engine running.

Additionally, the Poulan 530088788 comes with a 20-inch guide bar. This length allows for cutting larger logs while maintaining precision. The inclusion of a high-performance chain further enhances cutting efficiency, enabling users to quickly and effectively tackle their tasks.

In conclusion, the Poulan 530088788 is a feature-rich chainsaw that offers a perfect combination of power, safety, and ease of use. Whether you are trimming branches, felling trees, or tackling firewood, this chainsaw has the capabilities to get the job done efficiently and effectively. Its thoughtful design and reliable performance make it a worthy investment for anyone in need of a dependable cutting tool.