Poulan 530164264 Storage, Limited Warranty, Trimmer Head Replacement, Blade Replacement

Page 12

5.Wind the line evenly and tightly onto the spool. Wind in the direction of the arrows found on the spool.

6.Push the lines into the notches, leaving 3 to 5 inches (7 -- 12 cm) unwound.

7.Insert the lines into the the exit holes in the hub as shown in the illustration.

8.Align the notches with the line exit holes.

9.Push spool into hub until it snaps into place.

10.Pull the lines extending outside of the hub to release the lines from the notches.

TRIMMER HEAD REPLACEMENT

Refer to the ASSEMBLY section for trimmer head replacement instructions and illustra- tions.

BLADE REPLACEMENT

Refer to the ASSEMBLY section for blade re- placement instructions and illustrations.

STORAGE

WARNING: Perform the following steps after each use:

SAllow attachment and gearbox to cool be-

fore storing or transporting.

SStore attachment with blade shield in place.

Position attachment so that any sharp ob- ject cannot accidentally cause injury.

SStore the attachment in a dry, well ventilated area out of the reach of children.

SEASONAL STORAGE

Prepare attachment for storage at end of sea- son or if it will not be used for 30 days or more. If your brushcutter attachment is to be stored for a period of time:

SClean the entire attachment.

SInspect the blade shield area and clean any

dirt, grass, leaves, or debris that has col- lected. Inspect the blade and blade shield; replace a blade that is bent, warped, cracked, broken or damaged in any other way.

SLightly oil external metal surfaces.

SApply a coating of oil to the entire surface of

the blade; wrap it in heavy paper or cloth.

SCheck entire attachment for loose screws or nuts. Replace any damaged, worn or

broken parts.

S At the beginning of the next season, use only fresh fuel having the proper gasoline to oil ratio.

LIMITED WARRANTY

ELECTROLUX HOME PRODUCTS, INC., warrants to the original purchaser that each new Poulan PRObrand gasoline tool or at- tachment is free from defects in material and workmanship and agrees to repair or replace under this warranty any defective gasoline product or attachment as follows from the original date of purchase.

2 YEARS -- Parts and Labor, when used for household purposes.

90 DAYS -- Parts and Labor, when used for commercial, professional, or income produc- ing purposes.

30 DAYS -- Parts and Labor, if used for rental purposes.

This warranty is not transferable and does not cover damage or liability caused by improper handling, improper maintenance, or the use of accessories and/or attachments not specifi- cally recommended by ELECTROLUX HOME PRODUCTS, INC., for this tool. Addi- tionally, this warranty does not cover tune- ups, spark plugs, filters, cutting line, or rotating head parts that will wear and require replace- ment with reasonable use during the warranty period. This warranty does not cover predeliv- ery setup or normal adjustments explained in the instruction manual.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

NO CLAIMS FOR CONSEQUENTIAL OR OTHER DAMAGES WILL BE ALLOWED, AND THERE ARE NO OTHER EXPRESS WARRANTIES EXCEPT THOSE EX- PRESSLY STIPULATED HEREIN.

SOME STATES DO NOT ALLOW LIMITA- TIONS ON HOW LONG AN IMPLIED WAR- RANTY LASTS OR THE EXCLUSION OR LIMITATIONS OF INCIDENTAL OR CONSE- QUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSION MAY NOT APPLY TO YOU.

The policy of ELECTROLUX HOME PROD-

UCTS, INC., is to continuously improve its products. Therefore, ELECTROLUX HOME PRODUCTS, INC., reserves the right to change, modify, or discontinue models, de- signs, specifications, and accessories of all products at any time without notice or obliga- tion to any purchaser.

12

Image 12
Contents 530164264 11/5/03Identification of Symbols Safety RulesAlways Wear Operator Safety UNIT/MAINTENANCE SafetyFuel Safety Cutting SafetyAssembly Carton ContentsInstalling Brushcutter Attachment Handlebar AssemblyShoulder Strap Assembly Powerhead ENDConfiguring Your Unit Assembly Information Trimmer HeadInstallation of the Trimmer Head Attaching the Plastic ShieldAssembly Information Weed BladeAttaching the Metal Shield Weed BladeOperation Installing Optional ATTACH- Ments Installing Attachment HangerOperating Position Cutting MethodsOperating Instructions for Brushcutter Attachment TrimmingScalping MowingMaintenance Service and AdjustmentsLimited Warranty Trimmer Head ReplacementBlade Replacement Storage

530164264 specifications

The Poulan 530164264 is a high-quality replacement chain designed for professionals and enthusiasts in the field of forestry and landscaping. Renowned for its cutting efficiency and durability, this chain is a smart investment for maintaining chain saw performance and effectiveness.

One of the main features of the Poulan 530164264 is its design, which utilizes precision-engineered components to ensure optimal performance. The chain is built for compatibility with various models of Poulan chain saws, providing versatility for users with multiple tools. The design incorporates a .325-inch pitch and a gauge of .058 inches, which strikes a perfect balance between cutting speed and control, making it ideal for tackling both small and medium-sized trees.

The construction of the Poulan 530164264 chain includes high-quality steel links, which enhance the chain’s lifespan while improving its resistance to wear and tear. This durability is essential for users who depend on their equipment for daily tasks, as it minimizes the frequency of replacements and maintenance. Additionally, the chain features heat-treated components, which strengthen its resilience against the rigors of heavy use and extend its operational lifespan.

A notable technology integrated into the Poulan 530164264 is the low-vibration design. This feature reduces fatigue for users during prolonged operation, ensuring a more comfortable and efficient cutting experience. By minimizing vibration, the chain also promotes smoother cuts, improving overall efficiency and effectiveness.

Another key characteristic of the Poulan 530164264 is its easy-to-sharpen design. The chain can be re-sharpened quickly and conveniently, allowing users to maintain optimal cutting performance without significant downtime. This characteristic is particularly beneficial for professional users who require their equipment to remain operational throughout the workday.

In summary, the Poulan 530164264 replacement chain stands out with its precision design, durability, and user-friendly features. Built for efficiency, the chain’s low-vibration technology, heat-treated construction, and compatibility with multiple Poulan models make it a reliable choice for both professionals and hobbyists. Whether you are clearing brush, cutting firewood, or tackling larger tree jobs, the Poulan 530164264 is engineered to deliver exceptional performance, ensuring you can stay productive and comfortable in all your cutting endeavors.