Maintenance, Service and Adjustments | Poulan 530164264 instruction

Bring the powerhead engine to cutting speed before entering the material to be cut.

If the blade does not turn when you squeeze the throttle trigger of the powerhead, make sure the attachment is fully inserted into the coupler.

Always release the throttle trigger and allow powerhead engine to return to idle speed when not cutting. The blade should not turn while the engine is running at idle. If the blade turns at idle, do not use your unit. Refer to the CARBURETOR ADJUSTMENT section of the powerhead manual or contact your autho- rized service dealer.

SMaintain good firm footing while using the unit. Do this by planting feet firmly in a com-

fortable apart position.

SCut while swinging the upper part of your body from left to right.

SAs you move forward to the next area to cut, be sure to maintain your balance, and footing.

RECOMMENDED CUTTING POSITION

	2 o’clock
Cut using the 2
o’clock to 4 o’clock	4 o’clock
position of the	4 o’clock
blade

WARNING: The operator or others must not try to clear away cut material with the engine running or the blade turning to avoid serious injury. Stop engine and blade before removing materials wrapped around blade or shaft.

MAINTENANCE

WARNING: Always stop unit and dis- connect spark plug wire before performing maintenance.

CHECK FOR DAMAGED OR WORN PARTS

Contact an authorized service dealer for re- placement of damaged or worn parts.

SBlade Shield -- Discontinue use of brushcut- ter attachment if blade shield is damaged.

STrimmer Shield -- Discontinue use of brush- cutter attachment if trimmer shield is dam- aged.

CHECK FOR LOOSE FASTENERS AND PARTS

SBlade nut S Fasteners

INSPECT AND CLEAN UNIT AND DECALS

S After each use, inspect complete unit for loose or damaged parts. Clean the unit and decals using a damp cloth with a mild detergent.

S Wipe off unit with a clean dry cloth.

BLADE MAINTENANCE

WARNING: The blade will continue to spin after the engine stops or after the throttle trigger has been released. To avoid serious injury, make sure the blade has stopped coasting and disconnect the spark plug before performing work on the blade.

WARNING: Always replace a blade that is bent, warped, cracked, broken, or dam- aged in any other way. Never attempt to straighten and reuse a damaged blade. Use only specified replacement blade. Wear pro- tective gloves when handling or performing maintenance on the blade to help avoid injury. S Check blade for flatness periodically. Lay

the blade on a flat surface to inspect for flat- ness. Throw away a blade that is not flat.

SERVICE AND ADJUSTMENTS

REPLACING THE LINE

1.Remove spool by firmly pulling on tap but- ton.

2.Clean entire surface of hub and spool.

3.Replace with a pre-wound spool, or cut two lengths of 12-1/2 feet of 0.080″ (2 mm) di- ameter Weed Eaterr brand line.

WARNING: Never use wire, rope, string, etc., which can break off and become a dangerous missile.

4.Insert ends of the lines about 1/2 inch (1 cm) into the small holes on the inside of spool.

Spool

Small

Holes

Line exit holes

Line in Notch

Line in Notch Hub

530164264 specifications

The Poulan 530164264 is a high-quality replacement chain designed for professionals and enthusiasts in the field of forestry and landscaping. Renowned for its cutting efficiency and durability, this chain is a smart investment for maintaining chain saw performance and effectiveness.

One of the main features of the Poulan 530164264 is its design, which utilizes precision-engineered components to ensure optimal performance. The chain is built for compatibility with various models of Poulan chain saws, providing versatility for users with multiple tools. The design incorporates a .325-inch pitch and a gauge of .058 inches, which strikes a perfect balance between cutting speed and control, making it ideal for tackling both small and medium-sized trees.

The construction of the Poulan 530164264 chain includes high-quality steel links, which enhance the chain’s lifespan while improving its resistance to wear and tear. This durability is essential for users who depend on their equipment for daily tasks, as it minimizes the frequency of replacements and maintenance. Additionally, the chain features heat-treated components, which strengthen its resilience against the rigors of heavy use and extend its operational lifespan.

A notable technology integrated into the Poulan 530164264 is the low-vibration design. This feature reduces fatigue for users during prolonged operation, ensuring a more comfortable and efficient cutting experience. By minimizing vibration, the chain also promotes smoother cuts, improving overall efficiency and effectiveness.

Another key characteristic of the Poulan 530164264 is its easy-to-sharpen design. The chain can be re-sharpened quickly and conveniently, allowing users to maintain optimal cutting performance without significant downtime. This characteristic is particularly beneficial for professional users who require their equipment to remain operational throughout the workday.

In summary, the Poulan 530164264 replacement chain stands out with its precision design, durability, and user-friendly features. Built for efficiency, the chain’s low-vibration technology, heat-treated construction, and compatibility with multiple Poulan models make it a reliable choice for both professionals and hobbyists. Whether you are clearing brush, cutting firewood, or tackling larger tree jobs, the Poulan 530164264 is engineered to deliver exceptional performance, ensuring you can stay productive and comfortable in all your cutting endeavors.