Shoulder Strap Assembly, Powerhead END | Poulan 530164264 manual

Handlebar Screw

Bracket Cover

Mounting

Bracket

1.Place the mounting bracket over the up- per shaft above the arrow on the safety label. Be sure to use the correct mount- ing bracket for either the 1″ (2.5 cm) or 7/8″ (2.2 cm) diameter upper shaft.

2.Position one of the bracket covers under the upper shaft and align the mounting bracket and the bracket cover screw holes. Insert two screws into the screw holes.

3.Secure the mounting bracket by tighten- ing the screws with the hex wrench.

4.Locate the decal on the handlebar. This decal includes an arrow. Position the handlebar with the mounting bracket at the end of the arrow.

5.Position the second bracket cover over the handlebar. Align the mounting brack- et and the bracket cover screw holes. Again make sure the handlebar is at the end of the arrow.

6.Insert two screws and hand tighten only. Be sure the handlebar is installed cor- rectly; then, tighten each screw securely with the hex wrench.

SHOULDER STRAP ASSEMBLY

WARNING: Proper shoulder strap and handlebar adjustments must be made with the engine completely stopped before us- ing unit. The shoulder strap clamp must be installed as shown above the handlebar on the upper shaft (powerhead end of unit).

NOTE: The lower shoulder strap clamp has two spacer tabs attached. These tabs are pro- vided to adapt this attachment for use with powerheads that have a 1″ (2.5 cm)diameter upper shaft (the shoulder strap clamp will not tighten down securely on the 1″ (2.5 cm) diam- eter upper shaft without using these spacer tabs). The tabs must be broken off completely before use and placed over the screw holes on the lower shoulder strap clamp. These tabs are not needed for powerheads with a 7/8″ (2.2 cm) upper shaft.

LOWER SHOULDER STRAP CLAMP

Spacer Tabs

Spacer Tabs positioned for use on 1″ (2.5 cm) diameter upper shaft

1.Place the upper shoulder strap clamp over the upper shaft above the handlebar.

2.Position the lower shoulder strap clamp under the upper shaft and align the upper and lower clamp screw holes (use spacer tabs between upper and lower clamps if necessary to secure clamp, i.e. for 1″ (2.5 cm) diameter upper shaft).

Upper Shoulder

Strap Clamp

POWERHEAD

END

	Lower Shoulder	ATTACHMENT
		END
	Strap Clamp
		Screws

3.Insert two screws into the screw holes.

4.Secure shoulder strap clamp by tighten- ing screws with the hex wrench.

5.Insert your right arm and head through the shoulder strap and allow it to rest on your left shoulder. Make sure the danger sign is on your back and the hook is to the

right side of your waist.

NOTE: A one-half twist is built in the shoulder strap to allow the strap to rest flat on the shoul- der.

6.Adjust the strap, allowing the hook to be about 6 inches below the waist.

7.Fasten the strap hook to the clamp and lift the tool to the operating position.

8.Try on shoulder strap and adjust for fit and balance before starting the engine or

beginning a cutting operation.

NOTE: It may be necessary to relocate the shoulder strap clamp on the shaft for proper balancing of unit.

530164264 specifications

The Poulan 530164264 is a high-quality replacement chain designed for professionals and enthusiasts in the field of forestry and landscaping. Renowned for its cutting efficiency and durability, this chain is a smart investment for maintaining chain saw performance and effectiveness.

One of the main features of the Poulan 530164264 is its design, which utilizes precision-engineered components to ensure optimal performance. The chain is built for compatibility with various models of Poulan chain saws, providing versatility for users with multiple tools. The design incorporates a .325-inch pitch and a gauge of .058 inches, which strikes a perfect balance between cutting speed and control, making it ideal for tackling both small and medium-sized trees.

The construction of the Poulan 530164264 chain includes high-quality steel links, which enhance the chain’s lifespan while improving its resistance to wear and tear. This durability is essential for users who depend on their equipment for daily tasks, as it minimizes the frequency of replacements and maintenance. Additionally, the chain features heat-treated components, which strengthen its resilience against the rigors of heavy use and extend its operational lifespan.

A notable technology integrated into the Poulan 530164264 is the low-vibration design. This feature reduces fatigue for users during prolonged operation, ensuring a more comfortable and efficient cutting experience. By minimizing vibration, the chain also promotes smoother cuts, improving overall efficiency and effectiveness.

Another key characteristic of the Poulan 530164264 is its easy-to-sharpen design. The chain can be re-sharpened quickly and conveniently, allowing users to maintain optimal cutting performance without significant downtime. This characteristic is particularly beneficial for professional users who require their equipment to remain operational throughout the workday.

In summary, the Poulan 530164264 replacement chain stands out with its precision design, durability, and user-friendly features. Built for efficiency, the chain’s low-vibration technology, heat-treated construction, and compatibility with multiple Poulan models make it a reliable choice for both professionals and hobbyists. Whether you are clearing brush, cutting firewood, or tackling larger tree jobs, the Poulan 530164264 is engineered to deliver exceptional performance, ensuring you can stay productive and comfortable in all your cutting endeavors.