Poulan 530164264 instruction manual Configuring Your Unit, Assembly Information Trimmer Head

Page 6

 

 

 

HARNESS

 

 

ADJUSTMENT

 

 

FOR BALANCE

6 inches

 

 

 

4 -- 12

 

 

 

 

 

 

 

inches

(15 cm)

 

 

 

(10 -- 30 cm)

below

 

30 inches

 

above

waist

 

 

ground

 

(76 cm)

 

 

 

 

 

 

 

 

30inches

(76 cm)

CONFIGURING YOUR UNIT

You can configure your unit using a trimmer head for grass and light weeds, or a weed blade for cutting grass, weeds, and brush up to 1/2 inch (1 cm) in diameter. To assemble your unit, go to the section for the desired configuration and follow the instructions.

ASSEMBLY INFORMATION - TRIMMER HEAD

TRIMMER

HEAD

NOTE: Remove the blade and metal shield be- fore attaching the plastic shield and trimmer head. To remove blade, align hole in the dust cup with the hole in the side of the gearbox by rotating the blade. Insert a small screwdriver into aligned holes. This will keep the shaft from turning while loosening the blade nut. Remove blade nut by turning clockwise. Remove the screwdriver. Remove both washers and blade. To remove metal shield, loosen and remove the four mounting screws. See ATTACHING THE

METAL SHIELD and INSTALLATION OF THE METAL BLADE for illustrations. Be sure to store all parts and instructions for future use.

INSTALLATION OF THE TRIMMER HEAD

NOTE: Before installing the trimmer head, make sure the dust cup and retaining washer are positioned on the shaft of the gearbox. The retaining washer must be positioned with the raised section toward the gearbox.

1.Align hole in the dust cup with the hole in the side of the gearbox by rotating the dust cup.

2.Insert a small screwdriver into aligned holes. This will keep the shaft from turn- ing while tightening trimmer head.

Screwdriver

3.While holding the screwdriver in position, thread trimmer head onto the shaft by turn- ing counterclockwise. Tighten until secure.

Gearbox

Dust cup

Retaining washer

Trimmer head

4.Remove the screwdriver.

ATTACHING THE PLASTIC SHIELD

WARNING: The shield must be prop- erly installed. The shield provides partial protection from the risk of thrown objects to the operator and others and is equipped with a line limiter blade which cuts excess line to the proper length. The line limiter blade (on under- side of shield) is sharp and can cut you.

1.Remove wing nut from shield.

2.Insert bracket into slot on shield.

3.Pivot shield until bolt passes through hole in bracket.

4.Tighten the wing nut securely.

Slot

Wing Nut

Bracket

Shield

 

 

Gearbox

PIVOT

 

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents 530164264 11/5/03Identification of Symbols Safety RulesAlways Wear Fuel Safety Operator SafetyUNIT/MAINTENANCE Safety Cutting SafetyInstalling Brushcutter Attachment AssemblyCarton Contents Handlebar AssemblyShoulder Strap Assembly Powerhead ENDInstallation of the Trimmer Head Configuring Your UnitAssembly Information Trimmer Head Attaching the Plastic ShieldAttaching the Metal Shield Assembly Information WeedBlade Weed BladeOperation Operating Position Installing Optional ATTACH- MentsInstalling Attachment Hanger Cutting MethodsScalping Operating Instructions for Brushcutter AttachmentTrimming MowingMaintenance Service and AdjustmentsBlade Replacement Limited WarrantyTrimmer Head Replacement Storage

530164264 specifications

The Poulan 530164264 is a high-quality replacement chain designed for professionals and enthusiasts in the field of forestry and landscaping. Renowned for its cutting efficiency and durability, this chain is a smart investment for maintaining chain saw performance and effectiveness.

One of the main features of the Poulan 530164264 is its design, which utilizes precision-engineered components to ensure optimal performance. The chain is built for compatibility with various models of Poulan chain saws, providing versatility for users with multiple tools. The design incorporates a .325-inch pitch and a gauge of .058 inches, which strikes a perfect balance between cutting speed and control, making it ideal for tackling both small and medium-sized trees.

The construction of the Poulan 530164264 chain includes high-quality steel links, which enhance the chain’s lifespan while improving its resistance to wear and tear. This durability is essential for users who depend on their equipment for daily tasks, as it minimizes the frequency of replacements and maintenance. Additionally, the chain features heat-treated components, which strengthen its resilience against the rigors of heavy use and extend its operational lifespan.

A notable technology integrated into the Poulan 530164264 is the low-vibration design. This feature reduces fatigue for users during prolonged operation, ensuring a more comfortable and efficient cutting experience. By minimizing vibration, the chain also promotes smoother cuts, improving overall efficiency and effectiveness.

Another key characteristic of the Poulan 530164264 is its easy-to-sharpen design. The chain can be re-sharpened quickly and conveniently, allowing users to maintain optimal cutting performance without significant downtime. This characteristic is particularly beneficial for professional users who require their equipment to remain operational throughout the workday.

In summary, the Poulan 530164264 replacement chain stands out with its precision design, durability, and user-friendly features. Built for efficiency, the chain’s low-vibration technology, heat-treated construction, and compatibility with multiple Poulan models make it a reliable choice for both professionals and hobbyists. Whether you are clearing brush, cutting firewood, or tackling larger tree jobs, the Poulan 530164264 is engineered to deliver exceptional performance, ensuring you can stay productive and comfortable in all your cutting endeavors.
Top Page Image Contents