Omega 8000 owner manual Ground Adjustment Chart, Varying in proportion to target

Page 18

GROUND ERROR cont.

GROUND ADJUSTMENT CHART

If	or in autotune
bars	pumping coil		then
appear	sounds like		then
AT TOP
	PUSHING SOUND
	OUT OF	PRESS		TO ADJUST
	GROUND

AT BOTTOM
AT B TT
	PULLING SOUND
	INTO	PRESS		TO ADJUST
	GROUND

	SAME SOUND			NO
NO BARS	WHEN RAISING	ADJUSTMENT
	AND LOWERING	NECESSARY

AUDIO TARGET IDENTIFICATION SYSTEM

Different types of metals will induce different types of sounds, depending on your TONES setting.

There are 4 choices in DISCRIMINATION MODE:

d1. Medium-to-high		pitch	tone,
varying in proportion to target
signal	strength. Large shallow
objects will produce a squeal. The
variable audio pitch provides you
more	information	about	the

detected object. Volume and Pitch increase with increase in signal strength.

d3. Three different audio tones. Bass Tone: Iron

Low Tone: Foil, 5¢, Tab and Zinc

High Tone: Dime, Qtr

d2. Iron produces a bass tone regardless signal strength. Volume varies in proportion to signal strength. Non-ferrous targets respond as in d1.

d4. Four Different audio tones Bass Tone: Iron

Low Tone: Foil, Tab, and Zinc

Medium Tone: 5¢

High Tone: Dime, Qtr

The default setting is d3.

To choose from the above selections, press the TONES touch pad. Each press of the TONES touch pad cycles to the next selection.

There are 4 choices in ALL-METALS MODE

A1, A2, A3, A4 - pitch varies with each setting.

18

Image 18

Contents Metal Detector Off appliances and lightsTable of Contents Terminology Metals which are made of, or contain, ironAssembly Assembly is easy and requires no toolsAdjusting the Arm Rest Detector can also be used without the strap, with noBattery Indicator Battery LifeSpeaker Volume and Battery Charge Segments Illuminated Battery VoltageII. Position the Detector QUICK-START DemonstrationSupplies Needed Wave each object over the searchcoil Bas Tone Nail Low TonePress the Notch touchpad on the front panel three times QUICK-STARTIX. Wave the nickel XI. Wave the NickelGround Minerals TrashIdentifying Buried Objects Size and Depth of Buried Objects Use with headphones not includedBasics Electromagnetic Interference EMIPowering UP Operation and ControlsDisc / AT Autotune Control PanelSensitivity DiscriminationControl Panel GND Grab Ground GrabFreq Frequency Selection Tones Number of Tones Selection Notch Selective Target Inclusion or ExclusionHow to Ground Balance your detector What is Ground BALANCING?Why do I need to Ground Balance? Ground BalancingGround Error Fe 3OGround Error Ground Adjustment Chart Varying in proportion to targetDepth and Target Display Small gold items will register under Iron or FoilDime Dimes and pre-1982 copper pennies will register here Typical Value Possible Objects Search Techniques in Disc mode Pinpointing process in motion modesTarget Pinpointing in Pinpoint mode Pinpoint as followsNarrow It Down Unit Specifications Year Limited Warranty