Omega 8000 owner manual Typical Value Possible Objects

Page 20
TARGET Readout
The table below lists some common approximate target value equivalents. With experience in the field, you will recognize many types of metal objects by their numeric value.
In discrimination mode the Two-digit
As a starting point, refer to the table below.
TWO DIGIT TARGET INDICATOR
The Depth Indicator is calibrated for coin-sized objects. It indicates the probable depth of the target, in inches.
target indicator, in the middle of the LCD display, provides a specific target value to help identify buried targets more accurately. With practice in the field, you will learn to associate
target values with the probable While holding the PinPoint touch pad, identification of buried objects. The and passing over a metal object target value can vary each time the “DEPTH” will appear under to the coil passes over the target, two-digit number in the middle of the
screen.depending upon the angle of the object and the distance from the coil.
DEPTH INDICATOR:
DEPTH AND TARGET DISPLAY
Reading the display continued

 

 

 

 

 

TYPICAL VALUE

POSSIBLE OBJECTS

 

 

 

 

 

 

10-40

Iron

 

 

56-57

Nickel,

 

 

60-62

Pull-Tab(old style)

 

 

62-65

Pull-Tab (new style),

 

 

66-72

Screw Cap

 

 

76-78

Zinc Penny

 

 

82-83

Dime & Copper Cent

 

 

86-87

Quarter

 

 

90-91

Half Dollar

 

 

94-95

Silver Dollar

 

 

 

 

 

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Metal Detector Off appliances and lightsTable of Contents Terminology Metals which are made of, or contain, ironAssembly Assembly is easy and requires no toolsAdjusting the Arm Rest Detector can also be used without the strap, with noBattery Life Speaker Volume and Battery ChargeBattery Indicator Segments Illuminated Battery VoltageQUICK-START Demonstration Supplies NeededII. Position the Detector Wave each object over the searchcoil Bas Tone Nail Low ToneQUICK-START IX. Wave the nickelPress the Notch touchpad on the front panel three times XI. Wave the NickelIdentifying Buried Objects Ground MineralsTrash Use with headphones not included BasicsSize and Depth of Buried Objects Electromagnetic Interference EMIPowering UP Operation and ControlsControl Panel SensitivityDisc / AT Autotune DiscriminationFreq Frequency Selection Control PanelGND Grab Ground Grab Tones Number of Tones Selection Notch Selective Target Inclusion or ExclusionWhat is Ground BALANCING? Why do I need to Ground Balance?How to Ground Balance your detector Ground BalancingGround Error Fe 3OGround Error Ground Adjustment Chart Varying in proportion to targetDime Dimes and pre-1982 copper pennies will register here Depth and Target DisplaySmall gold items will register under Iron or Foil Typical Value Possible Objects Search Techniques in Disc mode Pinpointing process in motion modesNarrow It Down Target Pinpointing in Pinpoint modePinpoint as follows Unit Specifications Year Limited Warranty
Top Page Image Contents