Omega 8000 owner manual Target Pinpointing in Pinpoint mode, Pinpoint as follows, Narrow It Down

Page 22

TARGET PINPOINTING (in PINPOINT mode)

After you have identified a target using a motion mode of detection, press-and-hold the PINPOINT pad to identify the target’s exact location. This technique can yield more information about the target’s shape and size and also find its exact location to facilitate extraction.

Pinpoint as follows:

1.Position the search coil just barely off the ground, and to the side of the target.

2.Now move the search coil slowly across the target, and you can locate it by the sound. The target is located directly under where the sound is loudest.

Narrow It Down:

1.To narrow the response further, position the center of the search coil near the center of the response pattern, but not directly over the

center.

2. Release the PINPOINT touch pad.

3.Press-and-hold PINPOINT pad again.

4.Repeat this narrowing procedure to narrow the field of detection further.

Note: Depth indication is less accurate after narrowing.

COIL DRIFT

If you plan to use the PINPOINT mode for continuous searching, realize that drift will occur over time, causing the detector to gain or lose sensitivity. Periodic retuning of the detector is required to minimize drift; release and press PINPOINT

again to retune.

22

Image 22

Contents Metal Detector Off appliances and lightsTable of Contents Terminology Metals which are made of, or contain, ironAssembly Assembly is easy and requires no toolsAdjusting the Arm Rest Detector can also be used without the strap, with noBattery Indicator Battery LifeSpeaker Volume and Battery Charge Segments Illuminated Battery VoltageII. Position the Detector QUICK-START DemonstrationSupplies Needed Wave each object over the searchcoil Bas Tone Nail Low TonePress the Notch touchpad on the front panel three times QUICK-STARTIX. Wave the nickel XI. Wave the NickelTrash Ground MineralsIdentifying Buried Objects Size and Depth of Buried Objects Use with headphones not includedBasics Electromagnetic Interference EMIPowering UP Operation and ControlsDisc / AT Autotune Control PanelSensitivity DiscriminationGND Grab Ground Grab Control PanelFreq Frequency Selection Tones Number of Tones Selection Notch Selective Target Inclusion or ExclusionHow to Ground Balance your detector What is Ground BALANCING?Why do I need to Ground Balance? Ground BalancingGround Error Fe 3OGround Error Ground Adjustment Chart Varying in proportion to targetSmall gold items will register under Iron or Foil Depth and Target DisplayDime Dimes and pre-1982 copper pennies will register here Typical Value Possible Objects Search Techniques in Disc mode Pinpointing process in motion modesPinpoint as follows Target Pinpointing in Pinpoint modeNarrow It Down Unit Specifications Year Limited Warranty