Omega 8000 Batteries, Battery Life, Speaker Volume and Battery Charge, Battery Indicator

Page 6

BATTERIES

A 4-segment battery indicator at the top-left of the display indicates the battery condition.

The detector requires a single 9-volt ALKALINE battery (battery not included).

Do not use ordinary zinc carbon batteries.

Do not use “Heavy Duty” batteries.

Rechargeable batteries can also be used.

If you wish to use rechargeable batteries, we recommend using a Nickel Metal Hydride rechargeable battery.

The battery compartment is located on the back side of the housing.

Slide the battery door to the side and remove it to expose the battery compartment.

BATTERY LIFE

Expect about 20 to 25 hours of life from a 9-volt alkaline battery. Rechargeable batteries provide about 8 hours of usage per charge.

SPEAKER VOLUME AND BATTERY CHARGE

You may notice the speaker volume drop while one battery segment is illuminated. With one segment flashing, low speaker volume will be very apparent.

For loudest speaker volume, select 1 or 2 tones under the # OF TONES menu selection.

BATTERY INDICATOR

The 4-segment battery indicator has 3 stages of indication. These indications are accurate for a 9-volt alkaline battery.

Segments Illuminated

Battery Voltage

4

-segments

more than 8.5 volts

3

-segments

more than 7.5 volts

2

-segments

more than 6.8 volts

1

-segment flashing

more than 6.4 volts

After the 1st segment begins flashing, expect the detector to shut off within 10 minutes.

A rechargeable battery will usually illuminate three to four segments throughout most of its useful charge. But as soon as it drains to the 1-segment level, it will then discharge very rapidly.

6

Image 6
Contents Metal Detector Off appliances and lightsTable of Contents Terminology Metals which are made of, or contain, ironAssembly Assembly is easy and requires no toolsAdjusting the Arm Rest Detector can also be used without the strap, with noBattery Indicator Battery LifeSpeaker Volume and Battery Charge Segments Illuminated Battery VoltageII. Position the Detector QUICK-START DemonstrationSupplies Needed Wave each object over the searchcoil Bas Tone Nail Low TonePress the Notch touchpad on the front panel three times QUICK-STARTIX. Wave the nickel XI. Wave the NickelGround Minerals TrashIdentifying Buried Objects Size and Depth of Buried Objects Use with headphones not includedBasics Electromagnetic Interference EMIPowering UP Operation and ControlsDisc / AT Autotune Control PanelSensitivity DiscriminationControl Panel GND Grab Ground GrabFreq Frequency Selection Tones Number of Tones Selection Notch Selective Target Inclusion or ExclusionHow to Ground Balance your detector What is Ground BALANCING?Why do I need to Ground Balance? Ground BalancingGround Error Fe 3OGround Error Ground Adjustment Chart Varying in proportion to targetDepth and Target Display Small gold items will register under Iron or FoilDime Dimes and pre-1982 copper pennies will register here Typical Value Possible Objects Search Techniques in Disc mode Pinpointing process in motion modesTarget Pinpointing in Pinpoint mode Pinpoint as followsNarrow It Down Unit Specifications Year Limited Warranty