Rhino Mounts FM100 manual Lower Hitch Attachment, Caster Wheel Attachments

Page 73

ASSEMBLY

LOWER HITCH ATTACHMENT

Attach the Lower Hitches (13) to Deck with the Spacer (14), Bolt (15) and Nut (16). Place the Lower Hitch Pins (17) thru the Lower Hitches and secure with Lynch Pins (18). FIGURE 1.

CASTER WHEEL ATTACHMENTS

Attach the right and left Axle Arm Weldment (1) to the deck with bolts (2) flatwashers (3), and locknuts (4). Install two one inch spacer (6) and two 1/4 inch spacers (8) on each fork and wheel assembly shaft (5) , which include Bearing (7). Insert fork shaft (5) into axle arm weldment (1). Install two additional one inch spacers

(6) on each axle shaft (5) and retain using Snapper Pin. (9) FIGURE 2.

1

4

FIGURE 23

2

1

9

4

3

8

7

26

5

DRIVELINE ATTACHMENT - To Gearbox

1.Insert yoke onto splined shaft. Grab and pull collar on end yoke.

2.Slide yoke (with collar depressed) onto gearbox shaft.

3.Move yoke back and forth until collar clicks forward and locks the yoke in place.

FM100 02/04	Assembly Section 3-3
© 2004 Alamo Group Inc.

ASSEMBLY

Image 73

Contents FM100 To the OWNER/OPERATOR/DEALER Safety Training Makes the Difference Page Table of Contents Page Safety Section ¡LEA EL PeligroInstructivo Safety Safety Following rules Keep Away from Rotating Elements to prevent entanglement Safety Stop Mowing if Passersby are Within 100 Yards Unless Wait a minute...Save a life See Your SERVIS-RHINO Dealer Parts InformationQTY Level Description Safety Decal LocationSafety Decals D103 Safety Safety Federal Laws and Regulations Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Introduction Section Introduction Introduction Before Operating this Machine Assembly Section Frame Attachment Exceed Horsepower Recommendations Dealer SET-UP InstructionsCaster Wheel Attachments Lower Hitch AttachmentPage Operation Section Attaching Mower to Tractor Lift Type Tractor PreparationDriveline Attachment to Tractor Cutting Height AdjustmentStarting & Stopping Cutter Cutting Tips Cutting SpeedDetaching and Storing Before Operating or Transporting this Mower Driveline Length Check ProcedureFront Gauge Wheel Interference Check Driveline LengthStreaking Problem Possible Cause RemedyDamaged Belt Maintenance Section Lubrication Fitting Location Lubrication InformationDescription Frequency Gauge Wheel Assemblies GearboxBlade Spindle Lubrication Driveline LubricationBlade Servicing Blade InstallationBlade Sharpening Blade RemovalBelt Adjustment Procedure Figure Proper Torque for Fasteners StorageMaintenance SERVIS-RHINO Page To the OWNER/OPERATOR/DEALER Gearbox WarrantyFM100-SOM-02/04 00767123C Printed U.S.A RHINO-SERVIS SERVIS-RHINOWARRANTY Registration Information Page Dealer Copy Page Customer Copy