R & M Int'l CGC-1e warranty Maintenance / Specifications, ALL Rights Reserved

	MAINTENANCE / SPECIFICATIONS
SPECIFICATIONS:
System operating voltage		120vac +/- 20% @ 50-60 Hertz
Maximum Switching amperage		15-amps @ 120vac
Overload protection		15-amp normal blow fuse
Operating temperature		0 - 50’ C / 32 - 122’ F
Maximum humidity		95% RH (Non-condensing)
Temperature control range		50-115’ F with a 7’ F differential, +/- 3.6’
Humidity control range		20 - 80% RH with a 5% differential
Adjustable timer repeatability		+/- .2% under fixed conditions
Timer setting accuracy		+/- 5%
Hydro “ON” timer		1 second to 40 minutes
Hydro “OFF” timer		1 minute to 8 hours
CO2 Inject duration timer		1 second to 40 minutes
CO2 Inject frequency timer		1 minute to 8 hours
24-hour timeclock accuracy		+/- 3% monthly
Dimensions		10” X 8” X 7”
Weight		Less than 6 lbs.
Relay operations		Minimum 100,000 electrical / 10,000,000 mechanical

MAINTENANCE:

1)Consult the troubleshooting chart for a listing of the most common problems.

2)DO NOT open the enclosure!!! There are no components that require maintenance.

3)Do not use this equipment for purposes other than what it is designed for. It will provide many years of trouble-free service when used properly.

4)In the event you cannot solve the problem, first consult the dealer who sold the unit then contact the factory for instructions on how to return it to the factory for repair.

PUBLISHED BY R & M Supply INC.

COPYRIGHT 2008 BY R & M Supply

ALL RIGHTS RESERVED.

Liability statement:

R & M Supply and their retailers and distributors are not responsible for any damage or injuries (consequential or otherwise) arising from the use of this device. The purchaser assumes all responsibility for the use and proper installation of this device.

Page 10