RedMax CHTZ2401L manual Limited Warranty

Page 51

RedMax

LIMITED WARRANTY

EMISSION-RELATED PARTS, FOR TWO (2) YEARS FROM THE DATE OF ORIGINAL DELIVERY OF THE UNIT,

RedMax / KOMATSU ZENOAH AMERICA, INC., THROUGH ANY RedMax DEALER, WILL REPAIR OR REPLACE, FREE OF CHARGE, FOR THE ORIGINAL AND EACH SUBSEQUENT PURCHASER, ANY PART OR PARTS FOUND TO BE DEFECTIVE IN MATERIAL AND/OR WORKMANSHIP.

EMISSION-RELATED PARTS ARE:

THE CARBURETOR ASSEMBLY, COIL ASSEMBLY, ROTOR, SPARKPLUG,

AIR FILTER, FUEL FILTER, INTAKE MANIFOLD, AND THE GASKETS

ALL OTHER PARTS EXCEPT ABOVE PARTS, FOR TWO (2) YEARS OF USE, 90 DAYS FOR RENTAL USE, FROM THE DATE OF ORIGINAL PURCHASE, THE COMPANY, THROUGH ANY RedMax DEALER, WILL REPAIR OR REPLACE, FREE OF CHARGE, FOR THE ORIGINAL PURCHASER, ANY PART OF PARTS FOUND TO BE DEFECTIVE IN MATERIAL AND/OR WORKMANSHIP. THIS IS THE EXCLUSIVE REMEDY.

THE PURCHASER SHALL BEAR COSTS OF TRANSPORTING THE UNIT TO AND FROM THE RedMax DEALER.

THE PURCHASER SHALL NOT BE CHARGED FOR DIAGNOSTIC LABOR WHICH LEADS TO THE DETERMINATION THAT A WARRANTED PART IS DEFECTIVE, IF THE DIAGNOSTIC WORK IS PERFORMED AT THE RedMax DEALER.

THE PURCHASER OR OWNER IS RESPONSIBLE FOR THE PERFORMANCE OF THE REQUIRED MAINTENANCE AS DEFINED BY THE MANUFACTURER IN THE OWNER/OPERATOR MANUAL.

ANY WARRANTED PART WHICH IS NOT SCHEDULED FOR REPLACEMENT AS REQUIRED MAINTENANCE, OR WHICH IS SCHEDULED ONLY FOR REGULAR INSPECTION TO THE EFFECT OF "REPAIR OR REPLACE AS NECESSARY" SHALL BE WARRANTED FOR THE WARRANTY PERIOD. ANY WARRANTED PART WHICH IS SCHEDULED FOR REPLACEMENT AS REQUIRED MAINTENANCE SHALL BE WARRANTED FOR THE PERIOD OF TIME UP TO THE FIRST SCHEDULED REPLACEMENT POINT FOR THE PART.

ANY REPLACEMENT PART THAT IS EQUIVALENT IN PERFORMANCE AND DURABILITY MAY BE USED IN NON- WARRANTY MAINTENANCE OR REPAIRS, AND SHALL NOT REDUCE THE WARRANTY OBLIGATION OF THE COMPANY.

THE COMPANY IS LIABLE FOR DAMAGES TO OTHER ENGINE COMPONENTS CAUSED BY THE FAILURE OF A WARRANTED PART STILL UNDER WARRANTY.

THE WARRANTY DOES NOT APPLY TO THOSE UNITS WHICH HAVE BEEN DAMAGED BY NEGLIGENCE OF INSTRUCTION LISTED IN THE OWNER/OPERATOR MANUAL FOR PROPER USE AND MAINTENANCE OF THE UNITS, ACCIDENTAL MISHANDLING, ALTERATION, ABUSE, IMPROPER LUBRICATION, USE OF ANY PARTS OR ACCESSORIES OTHER THAN THOSE SPECIFIED BY THE COMPANY, OR OTHER CAUSES BEYOND THE COMPANY'S CONTROL.

THIS WARRANTY DOES NOT COVER THOSE PARTS REPLACED BY NORMAL WEAR OR HARMLESS CHANGES IN THEIR APPEARANCE.

THERE ARE NO OTHER EXPRESS WARRANTIES.

IMPLIED WARRANTIES INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO TWO (2) YEARS OF USE FROM THE ORIGINAL DELIVERY DATE.

LIABILITIES FOR INCIDENTAL OR CONSEQUENTIAL DAMAGE UNDER ANY AND ALL WARRANTIES ARE EXCLUDED.

SOME STATES DO NOT ALLOW LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS OR EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

IF YOU NEED TO OBTAIN INFORMATION ABOUT THE NEAREST SERVICE CENTER, PLEASE CALL RedMax / KOMATSU ZENOAH AMERICA, INC. AT (770)-381-5147.

IMPORTANT: YOU WILL RECEIVE A WARRANTY REGISTRATION CARD AT TIME OF PURCHASE.PLEASE FILL

OUT THE CARD AND SEND IT TO RedMax / KOMATSU ZENOAH AMERICA WITHIN SEVEN (7) DAYS. BE SURE TO KEEP A COPY FOR YOUR RECORDS.

KOMATSU ZENOAH AMERICA INC.

4344 Shackleford Road Suite 500

Norcross, Georgia 30093

Page 50 Page 52
Image 51
Page 50 Page 52
Contents OWNER/OPERATOR Manual Mode D’EMPLOI Manual DE Instrucciones Contents Differents Types D’AVERTISSEMENT DE CE Mode D’EMPLOI Tables des matieres ContenidoAdvertencias Contenidas EN EL Manual CHTZ2401L SpecificationsParts location Model HTZ2401 HTZ2401L CHTZ2401Modelo HTZ2401 HTZ2401L CHTZ2401 Emplacement des pieces Situación de las piezasFiche technique EspecificaciohesEmission Control Symbols on the machineInformation Importante Concernant LE Moteur EmplacementPosición Control DE EmisionesFor safe operation Working ConditionWorking Circumstance Circunstancias DE Trabajo Consignes de securite Instrucciones de seguridadConditions DE Travail Condición DE TrabajoBefore Starting the Engine Working PlanAntes DE Arrancar LA Máquina Plan DE TravailAvant DE Mettre LE Moteur EN Marche Plan DE TrabajoStarting the Engine Using the ProductEmpleo DEL Producto Demarrage DU MoteurUtilisation DE LA Machine Arranque DE LA MáquinaMaintenance ManualIf Someone Comes Mantenimiento SI QUELQU’UN S’APPROCHEEntretien SI SE Acerca AlguienHandling Fuel Refill after cooling the engineTransportation Transporte Manipulation DU Carburant Manejo DEL CombustibleTransport Llenar una vez que el motor se haya enfriadoWhen using Zenoah genuine oil FuelRecommended Mixing Ratio Gasoline 50OIL Proporción DE LA Mezcla Recomendada Gasolina 50 Aceite Rapport DE Melange Recommande Essence 50 HuileCarburant Combustible Lors de l’utilisation de la véritable huile ZenoahHOW to MIX Fuel Fueling the UnitFor Your Engine LIFE, Avoid Abastecimiento DE LA Unidad Comment Obtenir UN BON Melange Como Mezclar EL CombustibleRemplissage DU Reservoir Eviter Pour Prolonger LA Duree DE VIE DU MoteurFuel Aceite Para USO EN Motores DE 4-TIEMPOS Operation Starting EngineCutting head will start rotating upon the engine starts Demarrage DU Moter Arranque DEL Motor Fonctionnement UsoAir filter Adjusting Idling SpeedStopping Engine OP3 Running in the EngineAsentamiento DEL Motor Arret DU Moteur Apagado DEL MotorFonctionnement DU Moteur Reglage DU RalentiHandle Locking lever HOW to USEHandle CHTZ2401 only Do not press the throttle during this operationCómo Usar Procedure Dutilisation Manette CHTZ2401Hedge Trimming Techniques Vertical cutHorizontal cut Técnicas DE Recorte Techniques DE Taillage DE HaiesMaintenance Chart MaintenanceTabla DE Mantenimiento EntretienMantenimiento Tableau D’ENTRETIENSpark Plug Replacement Plug is NGK CMR7H or Champion RZ7CAIR Filter Fuel FilterEntretien Mantenimiento Blades Intake AIR Cooling VentAffûtage Ouïe DE Refroidissement PAR AIRVentilación DE Refrigeración DEL Aire DE Admisión LamesProcedures to be Performed After Every 100 Hours of USE StorageReduction Gearbox Caja DE Engranajes Procedures a Effectuer Toutes LES 100 Heures D’UTILISATIONRangement Almacenamiento ReducteurTroubleshooting guide 10. Guía de localización y solución de problemasGuide de localisation des pannes Remarque NotaParts list HTZ2401-L Cutting Unit CHTZ2401 S/N CHTZ2401-L S/N CHTZ2401-L Engine Unit HTZ2401/CHTZ2401 HTZ2401-L/CHTZ2401-L S/N Cylinder Comp Owner’s warranty responsibilities Manufacturer’s warranty coverageObligations du propriétaire liées à la garantie Couverture de la garantie constructeurResponsabilidades del propietario Cobertura de la garantía dada por el fabricanteLimited Warranty RedMax Garantie limitée Garantía Limitada Komatsu Zenoah America INC

CHTZ2401L, HTZ2401L, CHTZ2401, HTZ2401 specifications

The RedMax HTZ2401 and its variants, CHTZ2401, HTZ2401L, and CHTZ2401L, represent a class of high-performance hedge trimmers known for their efficiency, durability, and performance. These models are designed to cater to both professional landscapers and homeowners looking to achieve exceptional results in trimming and shaping hedges and bushes.

One of the standout features of the RedMax HTZ2401 series is their powerful engine. The trimmers are equipped with a robust 24.0cc two-stroke engine, which delivers impressive cutting power while maintaining fuel efficiency. This engine is known for its reliable performance, making it ideal for tackling even the most dense and unruly foliage. The incorporation of advanced technology ensures not only powerful trimming capabilities but also reduced emissions, contributing to environmentally-friendly operation.

The cutting system on the HTZ2401 models is another area where RedMax excels. The trimmers feature long, dual-sided blades that provide precision cutting. The blades are designed to cut through branches and twigs of various sizes effortlessly, making these trimmers suitable for a wide range of landscaping tasks. The extended reach of the blades allows for easy access to higher hedges without requiring the use of a ladder, enhancing both efficiency and safety during operation.

Comfort is also a key consideration in their design. The ergonomic handle provides a comfortable grip, reducing fatigue during prolonged use. The lightweight construction of the trimmers adds to their user-friendliness, allowing for maneuverability without sacrificing power. Additionally, the models are equipped with anti-vibration technology, which further enhances comfort by minimizing vibration transfer to the operator’s hands and arms.

Maintenance is straightforward, as these trimmers feature easy access to the air filter and spark plug, allowing for quick servicing. The RedMax HTZ2401 series is built with high-quality materials that ensure durability and longevity, ensuring that users can rely on these tools for years.

In summary, the RedMax HTZ2401, CHTZ2401, HTZ2401L, and CHTZ2401L hedge trimmers combine powerful engine performance, efficient cutting systems, ergonomic design, and easy maintenance. These features make them an excellent choice for anyone seeking reliable, high-quality hedge trimmers that can handle a wide range of landscaping tasks with ease. With RedMax, users can achieve professional-grade results with every trim.
Top Page Image Contents