RedMax EXZ2450S-PH manual Contents

Page 2

EXZ2450S-PH

SAFETY FIRST

Instructions contained in warnings within

this manual marked with a symbol concern critical points which must be taken into consideration to prevent possible serious bodily injury, and for this reason you are requested to read all such instructions carefully and follow them without fail.

WARNINGS IN THE MANUAL

WARNING

This mark indicates instructions which must be followed in order to prevent accidents which could lead to serious bodily injury or death.

IMPORTANT

This mark indicates instructions which must be followed, or it leads to mechanical failure, breakdown, or damage.

NOTE

This mark indicates hints or directions useful in the use of the product.

WARNING

1.Read this brushcutter Owner/Operator Manual carefully. Be sure you understand how to operate this unit properly before you use it. Failure to do so could result in serious injury.

2.Be sure to keep this manual handy so that you may refer to it later whenever any questions arise. Also note that you are requested to contact the dealer from whom you purchased the product for assistance the event that you have any questions which cannot be answered herein.

3.Always be sure to include this manual when selling, lending, or otherwise transferring the ownership of this product.

4.Do not lend or rent your machine without the owner's manual.

5.Be sure that anyone using your unit understands the infomation contained in this manual.

6.Never let a child under 13 years old use the machine.

Contents

1.

Parts location

3

2.

Specifications

4

3.

Warning labels on the machine

5

4.

Symbols on the machine

5

5.

For safe operation

6

6.

Set up

10

7.

Fuel and Chain Oil

13

8.

Operation

15

9.

Maintenance

23

10.

Storage

28

11.

Disposal

28

12.

Troubleshooting guide

28

US-2

Image 2
Contents EXZ2450S-PH Contents Parts location BC-EX2 LRT-EX PS-EX HE-EX2PS-EX SpecificationsLRT-EX RMS-EXManufactured Symbols on the machineEmission Control For safe operation Starting the engine Using the productBefore use Maintenance Fuel safetyAvoid noise problem TransportDisposal Set up PS-EX SE5 PS-EX SE6 Attaching the Pruning Mechanism SE1 PS-EX SE3 PS-EX SE4PS-EX SE1 PS-EX SE2HE-EX2 SE2 RMS-EX SE1 Sweeper Assembly SE1HE-EX2 SE1 Fuel WarrantyFuel and Chain Oil Gasoline RequirementsFueling the Unit HOW to MIX Fuel Recommended Mixing Ratio Gasoline 50 OILFor Your Engine LIFE, Avoid Chain OILOperation Adjusting the Line Length Adjusting Throttle CableAdjusting Idling Speed OP8 OP7Operation BC-EX2 only Optional blade usage OPT10 OPT7 OPT8 Starting the EngineCutting Method Controlling Blade ThrustOPT11 Maintenance BladeHow you can maintain the best control 22, 24-tooth blade Tooth blade Point OPT11PS-EX OP1 Adjusting OIL Flow RateAdjusting the Angle of the Cutting Blades OP1 Checking OIL SupplyRMS-EX OP1 Direction of rotationBREAK-IN Operation HE-EX2 OP1 Properly Dressed Operator OP1RMS-EX OP2 RMS-EX OP3 Operating Techniques OP2OP3OP4 Operating and Safety Tips OP5General Safety Instructions RMS-EX OP5MA1 AIR Filter MA3 MaintenanceMaintenance Chart Spark PlugMA5 Procedures to be Performed After Every 100 Hours of USEMuffler MA4Refilling Trimming Line MA1 Blades MA1BC-EX2 MA1 LRT-EX MA1PS-EX MA6 PS-EX MA1Oiling Port PS-EX MA2 PS-EX MA3 PS-EX MA4 PS-EX MA5 Guide BAREnd cap HE-EX MA1RMS-EX MA1 Main gearDisposal Troubleshooting guideStorage Case 1. Starting failureWarranty Commencement Date Manufacturers Warranty CoverageOwners Warranty Responsibilities What is CoveredHOW to File a Claim Emission Warranty Parts ListWhat is not Covered Where to GET Warranty Service