RedMax BCX2600S manual OP5, Stopping Engine OP2, Adjusting Idling Speed OP4

Page 18

8. Operation

OP4

IDLE SPEED: 3200rpm

OP5

(1)

0.04~0.08 inch

(1~2mm)

2.Overchoking can make the engine hard to start due to excess fuel. When the engine failed to start after several attempts, open the choke and repeat pulling the rope, or remove the spark plug and dry it.

■STOPPING ENGINE (OP2)

1.Release the throttle lever and run the engine for a half minute.

2.Shift the ignition switch to the STOP position.

IMPORTANT

•Except for an emergency, avoid stopping the engine while pulling the throttle lever.

■ADJUSTING IDLING SPEED (OP4)

1.When the engine tends stop frequently at idling mode, turn the adjusting screw clockwise.

2.When the cutting head keeps rotating after releasing the trigger, turn the adjusting screw counter-clockwise.

(1) Idle Adjusting Screw

NOTE

•Warm up the engine before adjusting the idling speed.

■ADJUSTING THE WIRE PLAY (OP5)

1.Place the throttle lever to the fully returned position.

2.Pull the throttle cable and check the play is proper range (0.04~0.08in)(1~2mm).

3.If the play is too large, bend the wire bracket to left side (i.e. cable side) by plier etc.

And if the play is too small, bend the wire bracket to right side (i.e. carburetor side) by plier etc.

(1) Wire bracket

IMPORTANT

•Too large play causes wire out from the position. Too small play causes throttle lever does not stay at idling position.

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents BCX2600S T3032-93110Page Safety First Parts location Avertissement Symbols on the machine EmplacementPosition For safe operation Working ConditionWorking Circumstance Working Plan Before Starting the Engine Starting the EngineUsing the Product Maintenance If Someone ComesHandling Fuel Transportation Set up SE5 SE6 Installing Cutting Head SE5 Balance UnitAdding OIL to CRANKCASE-INITIAL USE Oil / FuelRecommended OIL Type SectionDefinition of Blended Fuels USE of Blended FuelsUSE of Fuel Additives Operation OP1 OP2 OP3 Starting EngineOP4 Adjusting Idling Speed OP4Adjusting the Wire Play OP5 OP5Adjusting the Line Length OP6 Cutting Work Line Head UsageTrimming Grass and Weeds For safety reasons, do not use metalreinforced line MaintenanceMaintenance Chart MA1 MA2 MA3 MA4MA5 MA6 MA7 AIR FilterOil Fill Plug/Dipstick 2 O-Ring Top of Dipstick Wear gloves to prevent injury when handing the unitMA8 MA9 OIL Level Changing the OILMA10 MA11 MA12 MA13 Change the oil as follow Valve to Rocker ARM ClearanceRocker arm cover Fuel Filter Feeler gauge 2 Rocker arm Adjusting nut 4 GasketMA14 MA15 Fuel filterSpecified plug is Champion RDZ19H MA16Spark Plug Tightening Torque MufflerSpark arrester MA17 MA18Spark Arrester Gear Case MA18MA19 MA20 Cylinder Intake air cooling vent backCleaning and storage CleaningStorage Optional blade usage OPT4 OPT5 OPT6 Bracket HandleCutting Method OPT7 OPT8 Operation Controlling Blade BounceWhat causes kick out How you can reduce the chance of kick out How you can maintain the best controlOPT9 Maintenance Blade Transporting the UnitTroubleshooting guide Problem Cause ActionParts list 36  37  38  39  Manufacturer’s warranty coverage Model BCX2600S Year Limited Warranty RedMax TRIMMER/BRUSHCUTTERLimites de la garantie

BCX2600S specifications

The RedMax BCX2600S is a powerful and versatile brush cutter designed for both professional landscapers and homeowners seeking efficiency in clearing dense vegetation. This model stands out due to its blend of performance, ergonomic design, and innovative technology.

One of the key features of the RedMax BCX2600S is its robust 25.4cc commercial-grade engine. This 2-stroke engine provides ample power while remaining lightweight, allowing for extended periods of use without causing excessive fatigue to the operator. The engine is designed with advanced air filtration systems, which contribute to longer life and reduced maintenance. Additionally, the engine’s efficiency translates to better fuel consumption, making it a cost-effective option for users.

The BCX2600S includes a range of technological enhancements geared toward user comfort and operational effectiveness. The Smart Start system is a standout feature, allowing for easier starting with minimal effort. This technology reduces resistance in the starting cord by up to 40%, making it accessible for users of all skill levels. Coupled with the low vibration design, operators can enjoy a smoother experience during rigorous tasks.

Another significant characteristic of the BCX2600S is its adjustable handle. The bike handle configuration allows for multiple grip positions, providing flexibility and control during operation. This is particularly advantageous when working on sloped or uneven terrain, ensuring precision cutting without compromising comfort.

The string trimmer head of the BCX2600S supports rapid load, making it easy and quick to change trimmer lines without the hassle of manual threading. This feature is essential for landscaping professionals who need to switch out lines frequently to maintain efficiency on the job.

RedMax has also designed the BCX2600S with durability in mind. The materials used in its construction are resistant to wear and tear, allowing it to withstand tough conditions. Moreover, the included safety guards protect the operator while maintaining high performance.

In summary, the RedMax BCX2600S is a blend of power, innovative technology, and user-friendly design. Its efficient engine, advanced features, and durable build make it a reliable choice for tackling any clearing task, from maintaining gardens to handling larger outdoor projects. Whether you are a professional landscaper or a dedicated homeowner, this brush cutter is built to meet your needs while ensuring comfort and ease of use.
Top Page Image Contents