RedMax BCX2600S manual MA8 MA9 OIL Level, Oil Fill Plug/Dipstick 2 O-Ring Top of Dipstick

Page 22

9. Maintenance

MA8

MA9

■OIL LEVEL

WARNING

To prevent extensive engine wear and damage to the unit, always maintain the proper oil level in the crankcase. Never operate the unit with the oil level below the bottom of the dipstick.

1.Make sure the engine is stopped and is cool so the oil has had times to drain into the crankcase.

2.Place the unit on a flat, level surface to get a proper oil level reading.

3.To keep dirt, grass clippings, etc., out of the engine, clean the area around the oil fill plug/dipstick before removing it.

4.Remove the oil plug/dipstick and wipe the oil off. Reinsert it all the way back in.

5.Remove the oil plug/dipstick and check the oil level. The level should be up to the top of the dipstick. (MA9)

6.If the level is low, add a small amount of oil to the crankcase and recheck. Continue to do this until the oil level reaches the top of the dipstick. (MA9)

(1)Oil Fill Plug/Dipstick (2) O-Ring

(3)Top of Dipstick

NOTE

Be careful not to overfill the unit.

CHANGING THE OIL

For a new engine, change the oil after the first 10 hours of operation. Thereafter, change the oil after every 50 hours or before storing the unit for an extended period of time.

It is best to change the oil while the engine is still warm. The oil will flow freely and carry away more impurities.

WARNING

Wear gloves to prevent injury when handing the unit.

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents BCX2600S T3032-93110Page Safety First Parts location Avertissement Emplacement Symbols on the machinePosition Working Condition For safe operationWorking Circumstance Working Plan Before Starting the Engine Starting the EngineUsing the Product If Someone Comes MaintenanceHandling Fuel Transportation Set up SE5 SE6 Installing Cutting Head SE5 Balance UnitAdding OIL to CRANKCASE-INITIAL USE Oil / FuelRecommended OIL Type SectionUSE of Blended Fuels Definition of Blended FuelsUSE of Fuel Additives Operation OP1 OP2 OP3 Starting EngineOP4 Adjusting Idling Speed OP4Adjusting the Wire Play OP5 OP5OP6 Cutting Work Line Head Usage Adjusting the Line LengthTrimming Grass and Weeds For safety reasons, do not use metalreinforced line MaintenanceMaintenance Chart MA1 MA2 MA3 MA4MA5 MA6 MA7 AIR FilterOil Fill Plug/Dipstick 2 O-Ring Top of Dipstick Wear gloves to prevent injury when handing the unitMA8 MA9 OIL Level Changing the OILValve to Rocker ARM Clearance MA10 MA11 MA12 MA13 Change the oil as followRocker arm cover Fuel Filter Feeler gauge 2 Rocker arm Adjusting nut 4 GasketMA14 MA15 Fuel filterSpecified plug is Champion RDZ19H MA16Spark Plug Tightening Torque MufflerSpark arrester MA17 MA18Spark Arrester Gear Case MA18MA19 MA20 Cylinder Intake air cooling vent backCleaning Cleaning and storageStorage Optional blade usage Bracket Handle OPT4 OPT5 OPT6Cutting Method Controlling Blade Bounce OPT7 OPT8 OperationWhat causes kick out How you can reduce the chance of kick out How you can maintain the best controlOPT9 Maintenance Blade Transporting the UnitTroubleshooting guide Problem Cause ActionParts list 36  37  38  39  Manufacturer’s warranty coverage Model BCX2600S Year Limited Warranty RedMax TRIMMER/BRUSHCUTTERLimites de la garantie

BCX2600S specifications

The RedMax BCX2600S is a powerful and versatile brush cutter designed for both professional landscapers and homeowners seeking efficiency in clearing dense vegetation. This model stands out due to its blend of performance, ergonomic design, and innovative technology.

One of the key features of the RedMax BCX2600S is its robust 25.4cc commercial-grade engine. This 2-stroke engine provides ample power while remaining lightweight, allowing for extended periods of use without causing excessive fatigue to the operator. The engine is designed with advanced air filtration systems, which contribute to longer life and reduced maintenance. Additionally, the engine’s efficiency translates to better fuel consumption, making it a cost-effective option for users.

The BCX2600S includes a range of technological enhancements geared toward user comfort and operational effectiveness. The Smart Start system is a standout feature, allowing for easier starting with minimal effort. This technology reduces resistance in the starting cord by up to 40%, making it accessible for users of all skill levels. Coupled with the low vibration design, operators can enjoy a smoother experience during rigorous tasks.

Another significant characteristic of the BCX2600S is its adjustable handle. The bike handle configuration allows for multiple grip positions, providing flexibility and control during operation. This is particularly advantageous when working on sloped or uneven terrain, ensuring precision cutting without compromising comfort.

The string trimmer head of the BCX2600S supports rapid load, making it easy and quick to change trimmer lines without the hassle of manual threading. This feature is essential for landscaping professionals who need to switch out lines frequently to maintain efficiency on the job.

RedMax has also designed the BCX2600S with durability in mind. The materials used in its construction are resistant to wear and tear, allowing it to withstand tough conditions. Moreover, the included safety guards protect the operator while maintaining high performance.

In summary, the RedMax BCX2600S is a blend of power, innovative technology, and user-friendly design. Its efficient engine, advanced features, and durable build make it a reliable choice for tackling any clearing task, from maintaining gardens to handling larger outdoor projects. Whether you are a professional landscaper or a dedicated homeowner, this brush cutter is built to meet your needs while ensuring comfort and ease of use.
Top Page Image Contents