RedMax BCX2600S manual Troubleshooting guide, Problem Cause Action

Page 34

12. Troubleshooting guide

PROBLEM

CAUSE

ACTION

Engine will not start.

On/Off Stop Control is in the

Turn On/Off Stop Control to the

 

STOP position.

START position.

 

Empty fuel tank.

Fill fuel tank.

 

Primer bulb wasn't pressed

Press primer bulb fully and

 

enough.

slowly 5 – 7 time.

 

Engine flooded.

Use starting procedure

 

 

WITHOUT choke lever in the

 

 

START position.

 

Old Fuel.

Drain fuel tank/Add fresh fuel.

 

Fouled spark plug.

Replace or clean spark plug.

 

 

 

Engine will not idle.

Air Filter is Plugged.

Replace or clean air filter.

 

Old Fuel.

Drain fuel tank/Add fresh fuel.

Engine will not accelerate.

Old Fuel.

Drain fuel tank/Add fresh fuel.

 

Carburetor misadjusted.

Adjust carburetor.

 

Cutting head bound with grass.

Stop engine and clan cutting

 

 

head.

 

 

 

Engine lacks power to stalls

Dirty air filter.

Clean or replace air filter.

when cutting.

Old Fuel.

Drain fuel tank/Add fresh fuel.

 

Cutting head bound with gass.

Stop engine and clean cutting

 

 

head.

 

Combastion chamber, Muffler

Clean or replace cylinder head

 

or spark arrestor plugged.

muffler/spark arrestor (contact

 

 

authorized service dealer).

Engine rope is difficult to pull

Unit operated low or no oil.

Check oil level before starting.

or engine locks.

Oil accumulated in combustion

1.Remove spark plug.

 

chamber

2.Drain any oil from the spark

 

 

plug hole.

 

 

3.Pull the starter rope several

 

 

times to remove any excess

 

 

oil from the cylinder.

 

 

4.Clean, inspect and reinstall

 

 

spark plug, replace if

 

 

necessary.

 

 

5.Check oil level before starting.

 

 

 

Cutting head will not

Cutting head out of line.

Refill with new line.

advance line.

Inner reel bound up.

Replace inner reel.

 

Cutting head dirty.

Clean inner reel and outer

 

Line welded.

spool.

 

 

Disassemble, remove the

 

Line twisted when refilled.

welded section and rewind the

 

Not enough line is exposed.

line.

 

 

Disassemble and rewind line.

 

 

Push the Bump Knob and pull

 

 

out line until 4 in (102 mm) of

 

 

line is outside of the cutting

 

 

head.

 

 

 

If further assistance is required, contact your authorized service dealer.

34

Page 33 Page 35
Image 34
Page 33 Page 35
Contents BCX2600S T3032-93110Page Safety First Parts location Avertissement Emplacement Symbols on the machinePosition Working Condition For safe operationWorking Circumstance Working Plan Before Starting the Engine Starting the EngineUsing the Product If Someone Comes MaintenanceHandling Fuel Transportation Set up SE5 SE6 Installing Cutting Head SE5 Balance UnitAdding OIL to CRANKCASE-INITIAL USE Oil / FuelRecommended OIL Type SectionUSE of Blended Fuels Definition of Blended FuelsUSE of Fuel Additives Operation OP1 OP2 OP3 Starting EngineOP4 Adjusting Idling Speed OP4Adjusting the Wire Play OP5 OP5OP6 Cutting Work Line Head Usage Adjusting the Line LengthTrimming Grass and Weeds For safety reasons, do not use metalreinforced line MaintenanceMaintenance Chart MA1 MA2 MA3 MA4MA5 MA6 MA7 AIR FilterOil Fill Plug/Dipstick 2 O-Ring Top of Dipstick Wear gloves to prevent injury when handing the unitMA8 MA9 OIL Level Changing the OILValve to Rocker ARM Clearance MA10 MA11 MA12 MA13 Change the oil as followRocker arm cover Fuel Filter Feeler gauge 2 Rocker arm Adjusting nut 4 GasketMA14 MA15 Fuel filterSpecified plug is Champion RDZ19H MA16Spark Plug Tightening Torque MufflerSpark arrester MA17 MA18Spark Arrester Gear Case MA18MA19 MA20 Cylinder Intake air cooling vent backCleaning Cleaning and storageStorage Optional blade usage Bracket Handle OPT4 OPT5 OPT6Cutting Method Controlling Blade Bounce OPT7 OPT8 OperationWhat causes kick out How you can reduce the chance of kick out How you can maintain the best controlOPT9 Maintenance Blade Transporting the UnitTroubleshooting guide Problem Cause ActionParts list 36  37  38  39  Manufacturer’s warranty coverage Model BCX2600S Year Limited Warranty RedMax TRIMMER/BRUSHCUTTERLimites de la garantie

BCX2600S specifications

The RedMax BCX2600S is a powerful and versatile brush cutter designed for both professional landscapers and homeowners seeking efficiency in clearing dense vegetation. This model stands out due to its blend of performance, ergonomic design, and innovative technology.

One of the key features of the RedMax BCX2600S is its robust 25.4cc commercial-grade engine. This 2-stroke engine provides ample power while remaining lightweight, allowing for extended periods of use without causing excessive fatigue to the operator. The engine is designed with advanced air filtration systems, which contribute to longer life and reduced maintenance. Additionally, the engine’s efficiency translates to better fuel consumption, making it a cost-effective option for users.

The BCX2600S includes a range of technological enhancements geared toward user comfort and operational effectiveness. The Smart Start system is a standout feature, allowing for easier starting with minimal effort. This technology reduces resistance in the starting cord by up to 40%, making it accessible for users of all skill levels. Coupled with the low vibration design, operators can enjoy a smoother experience during rigorous tasks.

Another significant characteristic of the BCX2600S is its adjustable handle. The bike handle configuration allows for multiple grip positions, providing flexibility and control during operation. This is particularly advantageous when working on sloped or uneven terrain, ensuring precision cutting without compromising comfort.

The string trimmer head of the BCX2600S supports rapid load, making it easy and quick to change trimmer lines without the hassle of manual threading. This feature is essential for landscaping professionals who need to switch out lines frequently to maintain efficiency on the job.

RedMax has also designed the BCX2600S with durability in mind. The materials used in its construction are resistant to wear and tear, allowing it to withstand tough conditions. Moreover, the included safety guards protect the operator while maintaining high performance.

In summary, the RedMax BCX2600S is a blend of power, innovative technology, and user-friendly design. Its efficient engine, advanced features, and durable build make it a reliable choice for tackling any clearing task, from maintaining gardens to handling larger outdoor projects. Whether you are a professional landscaper or a dedicated homeowner, this brush cutter is built to meet your needs while ensuring comfort and ease of use.
Top Page Image Contents