RedMax manual RedMax TRIMMER/BRUSHCUTTER, Model BCX2600S Year Limited Warranty

Page 41

RedMax TRIMMER/BRUSHCUTTER

MODEL BCX2600S

2-YEAR LIMITED WARRANTY

EMISSION-RELATED PARTS, FOR TWO (2) YEARS FROM THE DATE OF ORIGINAL DELIVERY OF THE MODEL BCX2600S UNIT, KOMATSU ZENOAH AMERICA INC. (THE COMPANY),

THROUGH ANY RedMax DEALER, WILL REPAIR OR REPLACE, FREE OF CHARGE, FOR THE ORIGINAL AND EACH SUBSEQUENT PURCHASER, ANY PART OR PARTS FOUND TO BE DEFECTIVE IN MATERIAL AND/OR WORKMANSHIP. EMISSION-RELATED PARTS ARE:

THE CARBURETOR ASSY, COIL ASSY, ROTOR, SPARKPLUG,

AIR FILTER, FUEL FILTER, INTAKE MANIFOLD, AND THE GASKETS

ALL OTHER PARTS EXCEPT ABOVE PARTS, FOR TWO (2) YEARS OF HOME USE [ ONE (1) YEAR FOR ANY OTHER USE ] FROM THE DATE OF ORIGINAL ANY DELIVERY OF THE MODEL BCX2600S UNIT, THE COMPANY, THROUGH ANY RedMax DEALER, WILL REPAIR OR REPLACE, FREE OF CHARGE, FOR THE ORIGINAL PURCHASER, ANY PART OF PARTS FOUND TO BE DEFECTIVE IN MATERIAL AND/OR WORKMANSHIP. THIS IS THE EXCLUSIVE

REMEDY.

THE PURCHASER SHALL BEAR COSTS OF TRANSPORTING THE UNIT TO AND FROM THE RedMax DEALER.

THE PURCHASER SHALL NOT BE CHARGED FOR DIAGNOSTIC LABOR WHICH LEADS TO THE DETERMINATION THAT A WARRANTED PART IS DEFECTIVE, IF THE DIAGNOSTIC WORK IS PERFORMED AT THE RedMax DEALER.

THE PURCHASER OR OWNER IS RESPONSIBLE FOR THE PERFORMANCE OF THE REQUIRED MAINTENANCE AS DEFINED BY THE MANUFACTURER IN THE OWNER/OPERATOR MANUAL.

ANY WARRANTED PART WHICH IS NOT SCHEDULED FOR REPLACEMENT AS REQUIRED MAINTENANCE, OR WHICH IS SCHEDULED ONLY FOR REGULAR INSPECTION TO THE EFFECT OF "REPAIR OR REPLACE AS NECESSARY" SHALL BE WARRANTED FOR THE WARRANTY PERIOD.ANY WARRANTED PART WHICH IS SCHEDULED FOR REPLACEMENT AS REQUIRED MAINTENANCE SHALL BE WARRANTED FOR THE PERIOD OF TIME UP TO THE FIRST SCHEDULED REPLACEMNET POINT FOR THE PART.

ANY REPLACEMENT PART THAT IS EQUIVALENT IN PERFORMANCE AND DULABILITY MAY BE USED IN NON- WARRANTY MAINTENANCE OR REPAIRS, AND SHALL NOT REDUCE THE WARRANTY OBLIGATION OF THE COMPANY.

THE COMPANY IS LIABLE FOR DAMAGES TO OTHER ENGINE COMPONENTS CAUSED BY THE FAIRURE OF A WARRANTED PARTS STILL UNDER WARRANTY.

THE WARRANTY DOES NOT APPLY TO THOSE UNITS WHICH HAVE BEEN DAMAGED BY NEGLIGENCE OF INSTRUCTION LISTED IN THE OWNER/OPERATOR MANUAL FOR PROPER USE AND MAINTENANCE OF THE UNITS, ACCIDENT MISHANDLING, ALTERATION, ABUSE, IMPROPER LUBULICATION, USE OF ANY PARTS OR ACCESSARIES OTHER THAN THOSE SPECIFIED BY THE COMPANY, OR OTHER CAUSES BEYOND THE CONPANY'S CONTROL.

THIS WARRANTY DOES NOT COVER THOSE PARTS REPLACED BY NORMAL WEAR OR HARMLESS CHANGES IN THEIR APPEARANCE.

THERE ARE NO OTHER EXPRESS WARRANTIES.

IMPLIED WARRANTIES INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO TWO (2) YEARS OF HOME USE [ ONE (1) YEAR FOR ANY OTHER USE ] FROM THE ORIGINAL DELIVERY DATE.

LIABILITIES FOR INCIDENTAL OR CONSEQUENTIAL DAMAGE UNDER ANY AND ALL WARRANTIES ARE EXCLUDED.

SOME STATES DO NOT ALLOW LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS OR EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMINATION OR EXCLUSION MAY NOT APPLY TO YOU.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

IF YOU NEED TO OBTAIN INFORMATION ABOUT THE NEAREST SERVICE CENTER, PLEASE CALL KOMATSU ZENOAH AMERICA INC. AT (770)-381-5147.

IMPORTANT: YOU WILL RECEIVE A WARRANTY REGISTRATION CARD AT TIME OF PURCHASE.PLEASE FILL

OUT THE CARD AND SEND IT TO RedMax / KOMATSU ZENOA AMERICA WITHIN SEVEN (7) DAYS.BE SURE TO KEEP A COPY FOR YOUR RECORDS.

KOMATSU ZENOAH AMERICA INC.

4344 Shackleford Road Suite 500

Norcross, Georgia 30093

Page 40 Page 42
Image 41
Page 40 Page 42
Contents T3032-93110 BCX2600SPage Safety First Parts location Avertissement Position Symbols on the machineEmplacement Working Circumstance For safe operationWorking Condition Working Plan Starting the Engine Before Starting the EngineUsing the Product Handling Fuel MaintenanceIf Someone Comes Transportation Set up Balance Unit SE5 SE6 Installing Cutting Head SE5Recommended OIL Type Oil / FuelAdding OIL to CRANKCASE-INITIAL USE SectionUSE of Fuel Additives Definition of Blended FuelsUSE of Blended Fuels OP1 OP2 OP3 Starting Engine OperationAdjusting the Wire Play OP5 Adjusting Idling Speed OP4OP4 OP5Trimming Grass and Weeds Adjusting the Line LengthOP6 Cutting Work Line Head Usage Maintenance Chart MaintenanceFor safety reasons, do not use metalreinforced line MA1 MA2 MA3 MA4AIR Filter MA5 MA6 MA7MA8 MA9 OIL Level Wear gloves to prevent injury when handing the unitOil Fill Plug/Dipstick 2 O-Ring Top of Dipstick Changing the OILRocker arm cover MA10 MA11 MA12 MA13 Change the oil as followValve to Rocker ARM Clearance MA14 MA15 Feeler gauge 2 Rocker arm Adjusting nut 4 GasketFuel Filter Fuel filterSpark Plug MA16Specified plug is Champion RDZ19H Tightening Torque MufflerSpark Arrester MA17 MA18Spark arrester Gear Case MA18Cylinder Intake air cooling vent back MA19 MA20Storage Cleaning and storageCleaning Optional blade usage Cutting Method OPT4 OPT5 OPT6Bracket Handle What causes kick out OPT7 OPT8 OperationControlling Blade Bounce How you can maintain the best control How you can reduce the chance of kick outTransporting the Unit OPT9 Maintenance BladeProblem Cause Action Troubleshooting guideParts list 36  37  38  39  Manufacturer’s warranty coverage RedMax TRIMMER/BRUSHCUTTER Model BCX2600S Year Limited WarrantyLimites de la garantie

BCX2600S specifications

The RedMax BCX2600S is a powerful and versatile brush cutter designed for both professional landscapers and homeowners seeking efficiency in clearing dense vegetation. This model stands out due to its blend of performance, ergonomic design, and innovative technology.

One of the key features of the RedMax BCX2600S is its robust 25.4cc commercial-grade engine. This 2-stroke engine provides ample power while remaining lightweight, allowing for extended periods of use without causing excessive fatigue to the operator. The engine is designed with advanced air filtration systems, which contribute to longer life and reduced maintenance. Additionally, the engine’s efficiency translates to better fuel consumption, making it a cost-effective option for users.

The BCX2600S includes a range of technological enhancements geared toward user comfort and operational effectiveness. The Smart Start system is a standout feature, allowing for easier starting with minimal effort. This technology reduces resistance in the starting cord by up to 40%, making it accessible for users of all skill levels. Coupled with the low vibration design, operators can enjoy a smoother experience during rigorous tasks.

Another significant characteristic of the BCX2600S is its adjustable handle. The bike handle configuration allows for multiple grip positions, providing flexibility and control during operation. This is particularly advantageous when working on sloped or uneven terrain, ensuring precision cutting without compromising comfort.

The string trimmer head of the BCX2600S supports rapid load, making it easy and quick to change trimmer lines without the hassle of manual threading. This feature is essential for landscaping professionals who need to switch out lines frequently to maintain efficiency on the job.

RedMax has also designed the BCX2600S with durability in mind. The materials used in its construction are resistant to wear and tear, allowing it to withstand tough conditions. Moreover, the included safety guards protect the operator while maintaining high performance.

In summary, the RedMax BCX2600S is a blend of power, innovative technology, and user-friendly design. Its efficient engine, advanced features, and durable build make it a reliable choice for tackling any clearing task, from maintaining gardens to handling larger outdoor projects. Whether you are a professional landscaper or a dedicated homeowner, this brush cutter is built to meet your needs while ensuring comfort and ease of use.
Top Page Image Contents