RedMax BCX2600S manual MA10 MA11 MA12 MA13 Change the oil as follow, Valve to Rocker ARM Clearance

Page 23

9. Maintenance

MA10

MA11

MA12

MA13

Change the oil as follow:

1.Remove the oil fill plug/dipstick.

2.Pour the oil into a container by tipping the unit to a vertical position. Be sure to allow ample time for complete drainage. (MA10)

3.Wipe up any oil residue on the unit and clean up any oil that may have spilled. Dispose of the oil according to Federal, State and local regulations.

4.Refill the crankcase with 3.4 fluid oz (100ml) of SAE30, SH oil.

5.Reinstall the oil fill plug/dipstick.

NOTE

Make sure the O-ring is in place on the oil fill plug/dipstick when checking and changing the oil. (MA9)

■VALVE TO ROCKER ARM CLEARANCE

After the first 20 hours and every 50 hours of operation, inspect the valve to rocker arm clearance using a flat feeler gauge.

NOTE

This requires some disassembly of the engine. If you feel unsure or unqualified to perform this, take the unit to an authorized service center.

NOTE

The engine must be cold when checking or adjusting the valve clearance.

•This task should be performed inside, in a clean, dust free area.

1.Loosen the four screws shown in (MA11 (2)).

2.Remove the three screws that secure the engine cover. (MA11 (1), MA12 (1))

3.Disconnect the spark plug wire.

4.Remove the spark plug and then remove the engine cover.

5.Remove the rocker arm cover and gasket. (MA13)

(1) Rocker arm cover

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents T3032-93110 BCX2600SPage Safety First Parts location Avertissement Position Symbols on the machineEmplacement Working Circumstance For safe operationWorking Condition Working Plan Starting the Engine Before Starting the EngineUsing the Product Handling Fuel MaintenanceIf Someone Comes Transportation Set up Balance Unit SE5 SE6 Installing Cutting Head SE5Section Oil / FuelRecommended OIL Type Adding OIL to CRANKCASE-INITIAL USEUSE of Fuel Additives Definition of Blended FuelsUSE of Blended Fuels OP1 OP2 OP3 Starting Engine OperationOP5 Adjusting Idling Speed OP4Adjusting the Wire Play OP5 OP4Trimming Grass and Weeds Adjusting the Line LengthOP6 Cutting Work Line Head Usage MA1 MA2 MA3 MA4 MaintenanceMaintenance Chart For safety reasons, do not use metalreinforced lineAIR Filter MA5 MA6 MA7Changing the OIL Wear gloves to prevent injury when handing the unitMA8 MA9 OIL Level Oil Fill Plug/Dipstick 2 O-Ring Top of DipstickRocker arm cover MA10 MA11 MA12 MA13 Change the oil as followValve to Rocker ARM Clearance Fuel filter Feeler gauge 2 Rocker arm Adjusting nut 4 GasketMA14 MA15 Fuel FilterTightening Torque Muffler MA16Spark Plug Specified plug is Champion RDZ19HGear Case MA18 MA17 MA18Spark Arrester Spark arresterCylinder Intake air cooling vent back MA19 MA20Storage Cleaning and storageCleaning Optional blade usage Cutting Method OPT4 OPT5 OPT6Bracket Handle What causes kick out OPT7 OPT8 OperationControlling Blade Bounce How you can maintain the best control How you can reduce the chance of kick outTransporting the Unit OPT9 Maintenance BladeProblem Cause Action Troubleshooting guideParts list 36  37  38  39  Manufacturer’s warranty coverage RedMax TRIMMER/BRUSHCUTTER Model BCX2600S Year Limited WarrantyLimites de la garantie

BCX2600S specifications

The RedMax BCX2600S is a powerful and versatile brush cutter designed for both professional landscapers and homeowners seeking efficiency in clearing dense vegetation. This model stands out due to its blend of performance, ergonomic design, and innovative technology.

One of the key features of the RedMax BCX2600S is its robust 25.4cc commercial-grade engine. This 2-stroke engine provides ample power while remaining lightweight, allowing for extended periods of use without causing excessive fatigue to the operator. The engine is designed with advanced air filtration systems, which contribute to longer life and reduced maintenance. Additionally, the engine’s efficiency translates to better fuel consumption, making it a cost-effective option for users.

The BCX2600S includes a range of technological enhancements geared toward user comfort and operational effectiveness. The Smart Start system is a standout feature, allowing for easier starting with minimal effort. This technology reduces resistance in the starting cord by up to 40%, making it accessible for users of all skill levels. Coupled with the low vibration design, operators can enjoy a smoother experience during rigorous tasks.

Another significant characteristic of the BCX2600S is its adjustable handle. The bike handle configuration allows for multiple grip positions, providing flexibility and control during operation. This is particularly advantageous when working on sloped or uneven terrain, ensuring precision cutting without compromising comfort.

The string trimmer head of the BCX2600S supports rapid load, making it easy and quick to change trimmer lines without the hassle of manual threading. This feature is essential for landscaping professionals who need to switch out lines frequently to maintain efficiency on the job.

RedMax has also designed the BCX2600S with durability in mind. The materials used in its construction are resistant to wear and tear, allowing it to withstand tough conditions. Moreover, the included safety guards protect the operator while maintaining high performance.

In summary, the RedMax BCX2600S is a blend of power, innovative technology, and user-friendly design. Its efficient engine, advanced features, and durable build make it a reliable choice for tackling any clearing task, from maintaining gardens to handling larger outdoor projects. Whether you are a professional landscaper or a dedicated homeowner, this brush cutter is built to meet your needs while ensuring comfort and ease of use.
Top Page Image Contents