RedMax GZ3500T manual Troubleshooting Guide, Disposal, Case 1. Starting failure

Page 16

GZ3500T

WARNING

Be sure to round off the front edge to reduce the chance of kickback or tie-strap breakage.

Make sure every cutter has the same length and edge angles as illustrated.

Cutter length

Filing angle

Side plate angle

Top plate cutting angle

■Guide Bar

•Reverse the bar occasionally to prevent partial wear.

•The bar rail should always be square. Check for wear of the bar rail. Apply a ruler to the bar and the out

side of a cutter. If a gap is observed between them, the rail is normal. Otherwise, the bar rail is worn. Such a bar needs to be corrected or replaced.

Ruler

Gap

No gap

Chain tilts

WARNING:

This saw is equipped with one of the following low kickback bar/chain combinations:

 

RedMax Part Number

Bar Size

Guide Bar

Saw Chain

12

G3112

91VG45X

14

G3114

91VG52X

11. Troubleshooting Guide

Case 1. Starting failure

WARNING

Make sure the icing prevention system is not work- ing.

Check fuel for water

a

fuel.Replace with proper

or substandard mix-

ture.

 

 

 

 

 

Case 2. Lack of power/Poor acceleration/ Rough idling

Check fuel for water

 

 

a

fuel.Replace with proper

or substandard mix-

ture.

 

 

 

 

 

 

 

d

 

 

Check air filter and

 

 

a Clean.

fuel filter for clog-

d

Check for engine flooding.

d

Check spark ignition.

a

a

Remove and dry the spark plug.

Then pull the starter again with no choke.

Replace with a new plug.

ging.

 

 

 

 

 

 

 

d

 

 

Check carburetor

 

 

a

needles.Readjust speed

for inadequate ad-

justment.

 

 

 

 

 

Case 3. Oil does not come out

 

 

 

Check oil for sub-

a

Replace.

standard quality.

 

 

 

d

 

 

Check oil passage

 

 

a

Clean.

and ports for clog-

ging.

 

 

 

 

 

 

 

12. Disposal

When disposing your machine, fuel or oil for the machine, be sure to follow your local regulations.

If the unit seems to need further service, please consult with an authorized service shop in your area.

US-16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents GZ3500T Contents GZ3500T Power unit SpecificationsParts location Basic Safety Rules Because of high temperatureFor safe operation US-4Fuel Safety Before USECutting TransportKickback Safety Precautions For Chain SAW Users DisposalSymbols on the Machine Emission ControlAn emission control label is located on the engine US-7Standard saw unit package contains the items as illustrated Installing Guide Bar and Saw ChainPay attention to the correct direction of the saw chain Fuel and Chain Oil FuelGasoline Requirements OIL RequirementsRedmax TWO-STROKE Engine Warranty HOW to MIX Fuel Recommended Mixing Ratio Gasoline 50 OILFueling the Unit For Your Engine LIFE, AvoidAdjusting the Carburetor Operating the EngineStarting the Engine Normal start Turn the choke knob to the closed positionSawing Chain BrakeReleasing the Brake Stopping the EngineFelling a Tree Maintenance After Each USE MaintenancePeriodical Service Points Saw Chain Maintenance of Saw Chain and Guide BarUS-15 Troubleshooting Guide Case 2. Lack of power/Poor acceleration/ Rough idlingDisposal Case 1. Starting failureManufacturer’s warranty coverage US-17Limited Warranty US-18

GZ3500T specifications

The RedMax GZ3500T is a robust and versatile power equipment solution designed for professional landscapers and avid gardening enthusiasts alike. This high-performance tool stands out with its innovative features, powerful engine, and user-friendly design.

At the heart of the GZ3500T is a powerful 35cc 2-stroke engine, delivering impressive power and efficiency to handle a variety of tasks. This engine is designed to provide maximum torque and consistent performance, making it ideal for tackling thick grass and heavy brush with ease. The incorporation of RedMax's advanced Smart Start technology ensures that starting the engine is effortless, reducing pull resistance for easy ignition.

One of the standout features of the GZ3500T is its high-quality cutting system. The trimmer is equipped with a professional-grade double-line cutting head, allowing for swift cutting action and a clean finish. The cutting width of the GZ3500T is optimal for both narrow and wide spaces, making it suitable for both precise trimming and larger areas. The auto-feed head simplifies the process of line replacement, ensuring that users can quickly get back to their work without tedious interruptions.

User comfort and ergonomics are paramount in the design of the GZ3500T. Its lightweight construction, combined with a well-balanced design, minimizes fatigue during prolonged use. The adjustable handlebars offer customization for users of different heights, enhancing control and maneuverability. Additionally, the unit features a padded harness system that distributes weight evenly across the shoulders, further increasing comfort during operation.

Durability is another key characteristic of the RedMax GZ3500T. Built with high-quality materials and components, this trimmer is designed to withstand the rigors of professional use. The fuel tank is built for efficiency, allowing for longer run times between refueling. Furthermore, the engine is engineered to reduce emissions, complying with environmental regulations while providing a cleaner operation.

In summary, the RedMax GZ3500T is a top-tier trimmer that combines power, efficiency, and comfort. With its cutting-edge technologies, user-centric design, and durability, it serves as an essential tool for anyone looking to achieve a pristine landscape. Whether used for commercial purposes or personal projects, the GZ3500T proves to be an indispensable ally in the field.
Top Page Image Contents