RedMax GZ3500T manual Before USE, Cutting, Transport, Fuel Safety, Storage

Page 5

■BEFORE USE

1.Keep the saw chain sharp and the anti-vibration system, well main- tained. A dull chain will increase cut- ting time, and pressing a dull chain through wood will increase the vibra- tions transmitted to your hands. A saw with loose components or with damaged or worn AV buffers will also tend to have higher vibration levels.

2. Before you start the engine, make sure the saw chain is not contacting anything.

3. Always inspect the chain saw before each use for worn, Ioose, or dam- aged parts. Never operate a chain saw that is damaged, improperly ad- justed, or is not completely and se- curely assembled. Be sure that the saw chain stops moving when the throttle control trigger is released.

■CUTTING

1. Use extreme caution when cutting small size brush and saplings be- cause slender material may catch the saw chain and be whipped toward you or pull you off balance.

2.When cutting a limb that is under ten- sion, be alert for spring- back so that you will not be struck when the ten- sion in the wood fibers is released.

3.Always check the tree for dead branches which could fall during the felling operation.

4.Do not operate the chain saw in a tree unless specially trained to do so.

5.Never use a chain saw by holding it with one hand. A chain saw is not safe if controlled with one hand; you can cut yourself. Always have a secure, firm grip around the handles with both hands.

■TRANSPORT

1.Always carry the chain saw with the engine stopped, the guide bar and saw chain to the rear, and the muffler

away from your body.

2. When transporting your chain saw, make sure the appropriate guide bar scabbard is in place.

GZ3500T

■FUEL SAFETY

1. Always use caution when handling

 

 

fuel. Wipe up all spills and then move

 

 

the chain saw at least 10 ft(3 m) from

 

 

the fueling point before starting the

 

 

engine.

 

 

 

U

2.

Eliminate all sources of sparks or

S

 

flame (i.e. smoking, open flames, or

 

 

work that can cause sparks) in the

 

 

areas where fuel is mixed, poured,

 

 

or stored.

 

3. Do not smoke while handling fuel or while operating the chain saw.

4.Keep the handles dry, clean and free of oil or fuel mixture.

5.Always store fuel in an approved con- tainer designed for that purpose.

■STORAGE

1.Always store the chain saw and fuel so that there is no risk of leakages or fumes coming into contact with sparks or naked flames from electri- cal equipment, electric motors, re- lays/switches, boilers and the like.

2.For longer periods of storage or for transport of the chain saw, the fuel and chain oil tanks should be emp- tied.

3.When the chain saw is in storage make sure the appropriate guide bar scabbard is in place in order to pre- vent accidental contact with the sharp chain. Even a non-moving chain can cause serious cuts to your- self or persons you bump into with an exposed chain.

US-5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents GZ3500T Contents Parts location SpecificationsGZ3500T Power unit Because of high temperature Basic Safety RulesFor safe operation US-4Before USE Fuel SafetyCutting TransportDisposal Kickback Safety Precautions For Chain SAW UsersEmission Control Symbols on the MachineAn emission control label is located on the engine US-7Pay attention to the correct direction of the saw chain Installing Guide Bar and Saw ChainStandard saw unit package contains the items as illustrated Fuel Fuel and Chain OilGasoline Requirements OIL RequirementsHOW to MIX Fuel Recommended Mixing Ratio Gasoline 50 OIL Redmax TWO-STROKE Engine WarrantyFueling the Unit For Your Engine LIFE, AvoidOperating the Engine Adjusting the CarburetorStarting the Engine Normal start Turn the choke knob to the closed positionChain Brake SawingReleasing the Brake Stopping the EngineFelling a Tree Periodical Service Points MaintenanceMaintenance After Each USE US-15 Maintenance of Saw Chain and Guide BarSaw Chain Case 2. Lack of power/Poor acceleration/ Rough idling Troubleshooting GuideDisposal Case 1. Starting failureUS-17 Manufacturer’s warranty coverageUS-18 Limited Warranty

GZ3500T specifications

The RedMax GZ3500T is a robust and versatile power equipment solution designed for professional landscapers and avid gardening enthusiasts alike. This high-performance tool stands out with its innovative features, powerful engine, and user-friendly design.

At the heart of the GZ3500T is a powerful 35cc 2-stroke engine, delivering impressive power and efficiency to handle a variety of tasks. This engine is designed to provide maximum torque and consistent performance, making it ideal for tackling thick grass and heavy brush with ease. The incorporation of RedMax's advanced Smart Start technology ensures that starting the engine is effortless, reducing pull resistance for easy ignition.

One of the standout features of the GZ3500T is its high-quality cutting system. The trimmer is equipped with a professional-grade double-line cutting head, allowing for swift cutting action and a clean finish. The cutting width of the GZ3500T is optimal for both narrow and wide spaces, making it suitable for both precise trimming and larger areas. The auto-feed head simplifies the process of line replacement, ensuring that users can quickly get back to their work without tedious interruptions.

User comfort and ergonomics are paramount in the design of the GZ3500T. Its lightweight construction, combined with a well-balanced design, minimizes fatigue during prolonged use. The adjustable handlebars offer customization for users of different heights, enhancing control and maneuverability. Additionally, the unit features a padded harness system that distributes weight evenly across the shoulders, further increasing comfort during operation.

Durability is another key characteristic of the RedMax GZ3500T. Built with high-quality materials and components, this trimmer is designed to withstand the rigors of professional use. The fuel tank is built for efficiency, allowing for longer run times between refueling. Furthermore, the engine is engineered to reduce emissions, complying with environmental regulations while providing a cleaner operation.

In summary, the RedMax GZ3500T is a top-tier trimmer that combines power, efficiency, and comfort. With its cutting-edge technologies, user-centric design, and durability, it serves as an essential tool for anyone looking to achieve a pristine landscape. Whether used for commercial purposes or personal projects, the GZ3500T proves to be an indispensable ally in the field.
Top Page Image Contents