RedMax G621AVS manual Fueling the Unit, For Your Engine LIFE, Avoid, Chain OIL

Page 9

6. Fuel and Chain oil

again for at least one minute. As some oils may be difficult to agitate depending on oil ingredients, sufficient agitation is necessary for the engine to last long. Be careful that, if the agitation is insufficient, there is an increased danger of early piston seizing due to abnormally lean mixture.

5.Put a clear indication on the outside of the container to avoid mixing up with gasoline or other containers.

6.Indicate the contents on outside of container for easy identification.

FUELING THE UNIT

1.Untwist and remove the fuel cap. Rest the cap on a dustless place.

2.Put fuel into the fuel tank to 80% of the full capacity.

3.Fasten the fuel cap securely and wipe up any fuel spillage around the unit.

WARNING

1.Select bare ground for fueling.

2.Move at least 10feet (3meters) away from the fueling point before starting the engine.

3.Stop the engine before refueling the unit. At that time, be sure to sufficiently agitate the mixed gasoline in the container.

FOR YOUR ENGINE LIFE, AVOID;

1.FUEL WITH NO OIL(RAW GASOLINE) – It will cause severe damage to the internal engine parts very quickly.

2.GASOHOL – It can cause deterioration of rubber and/or plastic parts and disruption of engine lubrication.

3.OIL FOR 4-CYCLE ENGINE USE – It can cause spark plug fouling, exhaust port blocking, or piston ring sticking.

4.Mixed fuels which have been left unused for a period of one month or more may clog the carburetor and result in the engine failing to operate properly.

5.In the case of storing the product for a

long period of time, clean the fuel tank after rendering it empty. Next, activate the engine and empty the carburetor of the composite fuel.

6.In the case of scrapping the used mixed oil container, scrap it only at an authorized repository site.

NOTE

As lot details of quality assurance, read the description in the section Limited Warranty carefully. Moreover, normal wear and change in product with no functional influence are not covered by the warranty. Also, be careful that, if the usage in the instruction manual is not observed as to the mixed gasoline, etc. described therein, it may not be covered by the warranty.

CHAIN OIL

Use motor oil SAE 10W-30 all year round, or SAE 30-40 in summer and SAE 20 in winter.

NOTE

Do not use waste or regenerated oil that can cause damage to the oil pump.

9

Image 9
Contents 3369-93110 G621AVSContents Safety FirstSpecifications G621AVS Power unitParts location Engine Family 5KZXS Mnem Symbols on the machineFor safe operation Kickback Safety Precautions for Chain SAW Users Chain cover Chain tensioner nut Installing guide bar and saw chainMoving Direction Loosen TightenHOW to MIX Fuel Fuel and Chain oilRecommended Mixing Ratio Gasoline 50OIL Fueling the Unit For Your Engine LIFE, AvoidChain OIL Operation Chain oil Fuel SwitchStarting Engine Throttle interlock Latch Choke knobChecking OIL Supply Adjusting Carburetor F13ANTI-FREEZE Parts Icing Prevention SystemF19 How to confirmChain Brake Front handle Released Braking Brake leverGuard Against Kickback F20 SawingFelling a Tree F21 F21F22 F23 F24 F25 Log lying on the ground F22 Log hanging off the ground F23Cutting Limb of Fallen Tree F24 Maintenance After Each USE MaintenanceOiling port Oiling port Guide barPeriodical Service Points NGK BPM7A Maintenance of Saw Chain and Guide Bar F34 F35SAW Chain Guide BAR StorageOregon BAR GB BARTroubleshooting Guide Case 2. Lack of power/Poor acceleration/Rough idlingCase 3. Oil does not come out Parts list Fig.A-1 Power Unit G621AVS Fig.A-2 Power Unit  27  Fig.B Carbburetor Fig.D Cutting Head Chain Saws Limited Warranty RedMax Garantie limitée des tronçonneuses