Spiked bumper use, Tree felling | McCulloch 95390028700, 235, 316

-At the end of each cutting operation the user will notice a considerable change in the strength necessary for controlling the machine. Great care must be taken not to loose control .

Below is a description of two different types of cutting operation:

Cutting action by pulling the chain (from top to bottom) (fig.2) can lead to dangerous sudden movement of the machine towards the trunk with consequential loss of control. Where possible, use the spiked bumper during cutting operations.

Cutting action pushing the chain (from bottom to top) (fig.3) will lead to the danger of a sudden movement of the machine in the direction of the user, with the risk of hitting the user, or an impact of the “kickback danger zone” on the trunk resulting in strong kickback; extreme care must be taken when cutting in this manner.

The safest method for using the machine, is to block the log on a sawhorse, cutting from top to bottom, on the portion outside the sawhorse. (fig.4)

Spiked bumper use.

Where possible, use the spiked bumper to ensure safer cutting action: plant it in the bark or surface of the trunk in order to maintain more control over the machine.

Below are descriptions of typical cutting procedure to be adopted for specific situations. However, these should be assessed each time to calculate whether the method is most suitable or not, in order to use a method with the least possible risk.

Trunk on the ground. (Risk of touching the ground with the chain once the bar has passed trough the trunk). (fig.5)

Cut from top to bottom through the whole trunk. Towards the end of the cut, proceed very carefully to prevent the chain from hitting the ground. If it is possible, cut 2/3 of the trunk, roll it over, and cut the remaining third from top to bottom to limit the risk of the chain touching the ground.

Trunk supported at one end only (Risk of trunk breaking during cutting action). (fig.6)

Begin the cut from underneath for about 1/3 of the diameter, and then finish the cutting action from the top to meet the undercut.

Trunk supported at both ends. (Risk of pinching the chain). (fig.7)

Begin the cut from above for about 1/3 of the diameter, and then continue from underneath to meet the overcut.

Tree felling.

ATTENTION! : Never attempt to fell a tree if you do not have the necessary experience, and in any case never fell trees that have trunks with a diameter larger than the length of the bar ! This operation is reserved for expert machine users with adequate equipment.

When felling a tree, the aim is to have the tree fall in the most convenient position for the following limbing and bucking operations. (Avoid trees falling on top of other trees: Felling trees that are entangled with other trees is a very dangerous operation).

First of all decide which is the best direction for the tree to fall by evaluating the following: objects or other plants around the tree, the inclination, the curve, wind direction, and greatest branch concentration. Take into account dead or broken branches that may break off during felling creating a further danger risk.

ATTENTION! During tree felling operations in critical conditions, always remove ear protection immediately after cutting operations to be able to listen for unusual noises and any warning signals.

Preliminary cutting operations and identifying the retreat path.

Eliminate any branches that interfere with the job (fig.8), starting from top to bottom, and then, always keeping the trunk between the user and the machine eliminate the more difficult branches afterwards, piece by piece. Eliminate all plants that interfere with work operations and control the area for possible obstacles (rocks, roots, ditches,etc.) when planning the retreat path (to follow during tree fall); Refer to the illustration (fig.9) for the directions to be maintained (A. predicted tree fall direction. B. Retreat path. C. Danger zone).

FELLING CUTS (fig.10)

In order to ensure that the user has complete control over the tree fall, the cutting instructions are as follows:

The cut that controls the fall direction of the tree is to be executed first: First of all cut the UPPER PART of the directional notch on the side the tree must fall. Remain on the right hand side of the tree and cut using the chain pull method; then cut the LOWER PART that must meet the end of the upper part. The depth of the directional notch must be ¼ of the trunk diameter, with an angle of at least 45° between upper

ENGLISH – 9

316, 235, 95390048600, 95390028700 specifications

The McCulloch 95390028700 and 95390048600 are two powerful chainsaw models renowned for their reliability and performance in both professional and domestic applications. These models are designed to handle various cutting tasks, making them a favorite among landscaping professionals, arborists, and hobbyists alike.

One of the primary features of the McCulloch 95390028700 is its robust engine. It typically comes equipped with a high-output, two-stroke engine, which delivers impressive cutting power while maintaining fuel efficiency. This efficiency is further enhanced by the incorporation of advanced engine technology that minimizes emissions, aligning the tools with modern environmental standards.

In contrast, the McCulloch 95390048600 boasts a similar engine configuration but is often distinguished by its lighter weight, making it more user-friendly for extended use. Both models feature an ergonomic design, which ensures a comfortable grip and reduces fatigue during prolonged cutting sessions. This attention to user comfort is critical when tackling extensive projects or challenging tasks.

The cutting chains of both models are engineered for maximum life and performance, equipped with sharp teeth that slice through wood with ease. The easy-to-use tensioning system allows users to quickly adjust the chain tension for optimal performance, ensuring consistent cuts and maximized efficiency.

Both chainsaws also emphasize safety features, including chain brake systems that reduce the risk of injury. These safety mechanisms engage automatically in the case of kickback, providing peace of mind while operating such powerful tools.

In terms of maintenance, McCulloch has designed these models to be user-friendly, with easy access to the air filter and spark plug, ensuring that routine maintenance can be performed without hassle. This aspect is vital for maintaining peak performance over the life of the chainsaw.

Among the notable advancements in these models is the inclusion of vibration reduction technologies, which minimize user fatigue. This feature is particularly important for users who spend long hours operating the chainsaw, ensuring that they maintain control and accuracy throughout their tasks.

In summary, the McCulloch 95390028700 and McCulloch 95390048600 are exemplary chainsaw models that combine cutting power, user comfort, and advanced safety features. With their durable design and efficient engine technologies, these chainsaws are built to meet the demands of both professionals and DIY enthusiasts, providing exceptional performance and reliability for a wide variety of cutting tasks.