English | McCulloch 316, 95390028700, 95390048600, 235 specification

6.Health precautions – Chemical agents. Avoid all chain oil contact with skin and eyes.

7.Health precautions - Electricity. All extension cords, plugs, and electricity lines must be homologated, to standard and in compliance with current regulations. Make sure that the main line to which the machine is connected is equipped with a residual current device (RCD) with a current capacity no higher than 30mA. Make sure that all cables, plugs, and the residual current device are in correct working condition, that they comply with required characteristics, are mounted or hooked up correctly and are perfectly clean. Never disconnect the machine from the main line by pulling on the cable. Never use or store the machine and extension cord in damp environments. If the cable is damaged in any way, disconnect immediately from the main line socket, taking great care not to touch any exposed wires. Avoid all contact with grounded surfaces when using the machine (metal piping, cables, lightening conductors, etc). When working outdoors, all extension cords attached to the machine must be homologated for use out of doors. Avoid tying any knots in electric cables and never use rolled up extension cords.

8.Health precautions - Heat. During use pinion and chain reach very high temperatures, take care not to touch these parts while hot.

9.Health precautions – Sharp or moving parts. Never touch the chain except when the machine is switched off; in any case, always take great care since the chain is very sharp and can cut even when stopped. Remember that the chain will continue to rotate for a short time after the machine has been switched off.

10.Work area. Control the whole work area carefully to check for any danger source (e.g.: roads, paths, electric cables, dangerous trees, etc) Take special care when working on sloping ground. Cluttered areas can lead to injuries: before using the machine remove any stones, glass, cables, metal components, cans, bottles and any other foreign matter from the work area. Also take into consideration any danger risks that may not be noticed because of machine noise. Make sure that a second person is within calling distance in the case of accident. When working in isolated areas, always carry a first aid kit and make sure you have advised others of your exact location.

11. Work operations

Never start work with the machine before performing the following: remove the giude bar cover guard; make sure that a sufficient amount of oil has reached the chain; make sure you have a planned retreat path from falling trees (when cutting trees).

It is strictly forbidden to use the machine for: moving branches or roots; in cases where there is any danger that the chain may come into contact with the ground, electric protection, or piled wood; for cutting very thin branches or bushes (these will break easily and can whip bystanders or the user causing serious injury); for felling trees without adequate training and equipment (correct ropes, hooks, etc); starting sawing operations with the blade already engaged in a previous groove or slit; using the machine while standing on stepladders or other unstable surfaces; using the machine in extreme weather conditions, inclement weather, with reduced visibility and insufficient lighting (very low temperatures, very hot damp climates, fog, rain, wind, at night, etc.); using the machine with arms stretched: work must always be performed in a manner to ensure that the user can react immediately to unexpected conditions; it is forbidden to leave the machine unguarded; permitting others to touch the cable, extension cord , or the machine; forcing the machine during cutting action (this can lead to motor damage or loss of control over the machine); blocking the switch or the switch block with adhesive tape or other materials.

Always remember to: cut wood only (never cut plastic, metal, or other materials); make sure that the switch is NOT turned ON before inserting the plug in the socket or releasing the chain brake lever; make sure that the chain is not in contact with any objects at the moment the switch is turned ON; Keep all bystanders and animals well clear of the work area (where necessary, fence off the area and use warning signs) at a minimum distance of 2.5 m times the trunk height; in any case no less than ten meters. Wherever possible use a vice or a saw horse to block the wood to be cut; always hold the machine as follows: Grip the front handle with the left hand and the rear handle with the right hand, closing the thumb and other fingers firmly around the handle (during use, the machine could slide forwards or backwards, or create a reverse action, provoking a kickback reaction: holding the machine correctly reduces the risk of loosing control over the tool); Always make

ENGLISH - 4

316, 235, 95390048600, 95390028700 specifications

The McCulloch 95390028700 and 95390048600 are two powerful chainsaw models renowned for their reliability and performance in both professional and domestic applications. These models are designed to handle various cutting tasks, making them a favorite among landscaping professionals, arborists, and hobbyists alike.

One of the primary features of the McCulloch 95390028700 is its robust engine. It typically comes equipped with a high-output, two-stroke engine, which delivers impressive cutting power while maintaining fuel efficiency. This efficiency is further enhanced by the incorporation of advanced engine technology that minimizes emissions, aligning the tools with modern environmental standards.

In contrast, the McCulloch 95390048600 boasts a similar engine configuration but is often distinguished by its lighter weight, making it more user-friendly for extended use. Both models feature an ergonomic design, which ensures a comfortable grip and reduces fatigue during prolonged cutting sessions. This attention to user comfort is critical when tackling extensive projects or challenging tasks.

The cutting chains of both models are engineered for maximum life and performance, equipped with sharp teeth that slice through wood with ease. The easy-to-use tensioning system allows users to quickly adjust the chain tension for optimal performance, ensuring consistent cuts and maximized efficiency.

Both chainsaws also emphasize safety features, including chain brake systems that reduce the risk of injury. These safety mechanisms engage automatically in the case of kickback, providing peace of mind while operating such powerful tools.

In terms of maintenance, McCulloch has designed these models to be user-friendly, with easy access to the air filter and spark plug, ensuring that routine maintenance can be performed without hassle. This aspect is vital for maintaining peak performance over the life of the chainsaw.

Among the notable advancements in these models is the inclusion of vibration reduction technologies, which minimize user fatigue. This feature is particularly important for users who spend long hours operating the chainsaw, ensuring that they maintain control and accuracy throughout their tasks.

In summary, the McCulloch 95390028700 and McCulloch 95390048600 are exemplary chainsaw models that combine cutting power, user comfort, and advanced safety features. With their durable design and efficient engine technologies, these chainsaws are built to meet the demands of both professionals and DIY enthusiasts, providing exceptional performance and reliability for a wide variety of cutting tasks.