Limbing, Environmental Information, Design

and lower cut. The meeting point between the two sides of the notch is called “directional cut line” This line must be perfectly horizontal at right angles (90°) to the felling direction.

The felling cut that provokes the tree fall, is performed at 3 to 5 cm above the lower part of the directional felling cut line, finishing at a distance of 1/10 of the trunk from the notch. Remain on the left hand side of the tree and cut using the chain pulling method and the spiked bumper. Check that the tree does not move in a direction other than that predicted for the fall. As soon as possible insert a felling lever or wedge into the cut. The uncut part of the trunk is called the “hinge”, as it is intended to guide the tree as it falls; in cases where the cuts are not sufficient, not straight, or have been cut through completely, the

tree fall cannot be controlled (extremely dangerous!). For this reason the various cuts must be performed with great precision.

When cutting operations are completed the tree will begin to fall. Where necessary help tree fall using wedges or felling levers

Limbing

Once the tree has been felled, the trunk must be limbed: in other words, the branches are removed from the trunk. Do not underestimate this operation because the large majority of kickback accidents occur during this stage. For this reason pay close attention to the position of the bar nose during cutting operations and always work on the left hand side of the trunk.

I. ENVIRONMENTAL INFORMATION

This section contains information useful for maintaining the characteristic of ecocompatibility included in the origin design of the machine, and as regards proper use and disposal of chain oil

DESIGN

In the design stage, care was taken to develop an engine with reduced consumption and low emission of noise.

USE OF THE MACHINE

The operations of filling the oil tank should be carried out in such a way as to avoid spilling oil and contaminating the soil and the environment.

DISPOSAL

Do not dispose inappropriately of the machine when it is no longer usable. Deliver it to an authorized organization for proper disposal in compliance with the regulation in force.

The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local council office, your household waste disposal service or the shop where you purchased the product.

ENGLISH - 10

316, 235, 95390048600, 95390028700 specifications

The McCulloch 95390028700 and 95390048600 are two powerful chainsaw models renowned for their reliability and performance in both professional and domestic applications. These models are designed to handle various cutting tasks, making them a favorite among landscaping professionals, arborists, and hobbyists alike.

One of the primary features of the McCulloch 95390028700 is its robust engine. It typically comes equipped with a high-output, two-stroke engine, which delivers impressive cutting power while maintaining fuel efficiency. This efficiency is further enhanced by the incorporation of advanced engine technology that minimizes emissions, aligning the tools with modern environmental standards.

In contrast, the McCulloch 95390048600 boasts a similar engine configuration but is often distinguished by its lighter weight, making it more user-friendly for extended use. Both models feature an ergonomic design, which ensures a comfortable grip and reduces fatigue during prolonged cutting sessions. This attention to user comfort is critical when tackling extensive projects or challenging tasks.

The cutting chains of both models are engineered for maximum life and performance, equipped with sharp teeth that slice through wood with ease. The easy-to-use tensioning system allows users to quickly adjust the chain tension for optimal performance, ensuring consistent cuts and maximized efficiency.

Both chainsaws also emphasize safety features, including chain brake systems that reduce the risk of injury. These safety mechanisms engage automatically in the case of kickback, providing peace of mind while operating such powerful tools.

In terms of maintenance, McCulloch has designed these models to be user-friendly, with easy access to the air filter and spark plug, ensuring that routine maintenance can be performed without hassle. This aspect is vital for maintaining peak performance over the life of the chainsaw.

Among the notable advancements in these models is the inclusion of vibration reduction technologies, which minimize user fatigue. This feature is particularly important for users who spend long hours operating the chainsaw, ensuring that they maintain control and accuracy throughout their tasks.

In summary, the McCulloch 95390028700 and McCulloch 95390048600 are exemplary chainsaw models that combine cutting power, user comfort, and advanced safety features. With their durable design and efficient engine technologies, these chainsaws are built to meet the demands of both professionals and DIY enthusiasts, providing exceptional performance and reliability for a wide variety of cutting tasks.