Chain Catcher, Rear Hand Guard, For ES | McCulloch 95390048600, 235

The chain brake can be activated in two modes: the first using the left wrist by pushing forwards, or when it comes into contact with the brake system as a result of kickback; or by inertia, in the case of particularly violent kickback.

When the machine is used with the bar in horizontal position, for example during tree felling, the chain brake offers less protection, because it can be activated by inertia only, since the user’s hand is outside the range of action of the front hand guard (fig.3).

N.B.: When the chain brake is activated, a safety switch cuts off all current to the motor.

CHAIN CATCHER

This machine is equipped with a chain catcher (fig.4) located under the pinion. This mechanism is designed to arrest the backward chain movement in the case of chain breaking or derailing. These situations can be avoided by ensuring correct chain tension (Refer to chapter “D. Assembly/disassembly”).

REAR HAND GUARD

This acts to protect(fig.5) the hand in the case of chain breaking or derailing.

D. ASSEMBLY / DISASSEMBLY 2,3,6,7,8,9,12

BAR AND CHAIN ASSEMBLY

Assembly methods change according to the type of your machine- so please take care to refer to the illustrations and machine type marked on the label (A- Legend – 9 [ES15 / ES16 / ES18] ), Take great care when assembling to ensure this is performed correctly.

FOR ES 15 / ES 16

FOR ES 18

1.Control that the chain brake is not activated. If so, deactivate it.

2a. Unscrew the bar retaining nuts and remove	2b. Unscrew the bar retaining knob and remove the
the chain cover.	chain cover.
3a. Mount the bar on the bar retaining screws	3b. Mount the bar on the bar retaining screw pushing
pushing it as far backward towards the pinion	it as far backward towards the pinion as possible.
as possible.

4.Oil the chain, then position it over the pinion, making it slide into the bar guide groove, beginning with the upper part. Attention! Control that the sharp side of the cutting teeth face in a frontward direction on the upper part of the bar; Set the chain tensioner pin in the chain tensioner pin housing. Mount the chain cover making sure that the drive teeth of the chain are engaged in the pinion and in the guide groove.

5a. Close the bar retaining nuts, screwing by	5b. Screw the bar retaining knob loosely tightened.
hand.
6a. To spread the chain screw the chain	6b. To spread the chain screw the chain tensioner
tensioner screws in a clockwise direction, to	knob in a clockwise direction, to loosen tension, screw
loosen tension, screw in an anti-clockwise	in an anti-clockwise direction (when performing this
direction (when performing this operation	operation maintain the bar nose raised upwards)
maintain the bar nose raised upwards)

7 Spread the chain until the tension is correct; that is, when the chain is pulled upwards, the drive tooth rise to the same level as the bar. (the chain must never droop on the underside of the bar)

8a. Tighten the bar retaining nuts using an appropriate tool.

8b. Tighten the bar retaining knob strongly.

Tensioning the chain too tightly will overload the motor and cause damage, insufficient tension can provoke chain derailing, whereas a chain tightened correctly provides the best cutting characteristics and prolonged work life. Check the tension regularly because the chain length tends to stretch with use (especially when the chain is new; after the first assembly, the chain tension must be controlled after 5 minutes machine operation); in any

ENGLISH - 6

316, 235, 95390048600, 95390028700 specifications

The McCulloch 95390028700 and 95390048600 are two powerful chainsaw models renowned for their reliability and performance in both professional and domestic applications. These models are designed to handle various cutting tasks, making them a favorite among landscaping professionals, arborists, and hobbyists alike.

One of the primary features of the McCulloch 95390028700 is its robust engine. It typically comes equipped with a high-output, two-stroke engine, which delivers impressive cutting power while maintaining fuel efficiency. This efficiency is further enhanced by the incorporation of advanced engine technology that minimizes emissions, aligning the tools with modern environmental standards.

In contrast, the McCulloch 95390048600 boasts a similar engine configuration but is often distinguished by its lighter weight, making it more user-friendly for extended use. Both models feature an ergonomic design, which ensures a comfortable grip and reduces fatigue during prolonged cutting sessions. This attention to user comfort is critical when tackling extensive projects or challenging tasks.

The cutting chains of both models are engineered for maximum life and performance, equipped with sharp teeth that slice through wood with ease. The easy-to-use tensioning system allows users to quickly adjust the chain tension for optimal performance, ensuring consistent cuts and maximized efficiency.

Both chainsaws also emphasize safety features, including chain brake systems that reduce the risk of injury. These safety mechanisms engage automatically in the case of kickback, providing peace of mind while operating such powerful tools.

In terms of maintenance, McCulloch has designed these models to be user-friendly, with easy access to the air filter and spark plug, ensuring that routine maintenance can be performed without hassle. This aspect is vital for maintaining peak performance over the life of the chainsaw.

Among the notable advancements in these models is the inclusion of vibration reduction technologies, which minimize user fatigue. This feature is particularly important for users who spend long hours operating the chainsaw, ensuring that they maintain control and accuracy throughout their tasks.

In summary, the McCulloch 95390028700 and McCulloch 95390048600 are exemplary chainsaw models that combine cutting power, user comfort, and advanced safety features. With their durable design and efficient engine technologies, these chainsaws are built to meet the demands of both professionals and DIY enthusiasts, providing exceptional performance and reliability for a wide variety of cutting tasks.