McCulloch MAC GBV 325 instruction manual Internal Engine, Other, External Surfaces

Page 10

STORAGE

 

WARNING: Prepare unit for storage at

INTERNAL ENGINE

 

S

Remove spark plug and pour 1 teaspoon of

end of season or if it will not be used for 30 days

 

2-cycle engine oil (air cooled) through the

or more.

 

spark plug opening. Slowly pull the starter

S

Allow engine to cool, and secure the unit be-

 

rope 8 to 10 times to distribute oil.

 

fore storing or transporting.

S

Replace spark plug with new one of recom-

S

Store unit and fuel in a well ventilated area

 

mended type and heat range.

 

where fuel vapors cannot reach sparks or

S

Clean air filter.

 

open flames from water heaters, electric mo-

S

Check entire unit for loose screws, nuts, and

 

tors or switches, furnaces, etc.

 

bolts. Replace any damaged, broken, or worn

S Store unit with all guards in place. Position unit

 

parts.

 

so that any sharp object cannot accidentally

S

Start each season using only fresh fuel hav-

 

cause injury.

 

ing the proper gasoline to oil ratio.

S Store unit and fuel well out of the reach of chil-

OTHER

 

dren.

S Do not store gasoline from one season to

EXTERNAL SURFACES

 

another.

S If your unit is to be stored for a period of time,

S

Replace your gasoline can if it starts to rust.

 

clean it thoroughly before storage. Store in a

 

 

clean dry area.

SLightly oil external metal surfaces.

TROUBLESHOOTING TABLE

WARNING: Always stop unit and disconnect spark plug before performing any of the recommended remedies below other than remedies that require operation of the unit.

TROUBLE

CAUSE

REMEDY

Engine will not

1.Engine flooded.

1.See “Starting Instructions.”

start.

2.Fuel tank empty.

2.Fill tank with correct fuel mixture.

 

3.Spark plug not firing.

3.Install new spark plug.

 

4.Fuel not reaching carburetor.

4.Check for dirty fuel filter; replace.

 

 

Check for kinked or split fuel line;

 

5.Compression low.

repair or replace.

 

5.Contact an authorized service dealer.

Engine will not

1.Fuel not reaching carburetor.

1.Check for dirty fuel filter; replace.

idle properly.

 

Check for kinked or split fuel line;

 

2.Carburetor requires adjustment.

repair or replace.

 

2.Contact an authorized service dealer.

 

3.Crankshaft seals worn.

3.Contact an authorized service dealer.

 

4.Compression low.

4.Contact an authorized service dealer.

Engine will not

1.Air filter dirty.

1.Clean or replace air filter.

 

accelerate,

2.Fuel not reaching carburetor.

2.Check for dirty fuel filter; replace.

lacks power, or

 

Check for kinked or split fuel line;

dies under a

3.Spark plug fouled.

repair or replace.

3.Clean or replace spark plug; re-gap.

load.

4.Spark arresting screen clogged.

4.Replace screen.

 

 

5.Carburetor requires adjustment.

5.Contact an authorized service dealer.

 

6.Carbon build up.

6.Contact an authorized service dealer.

 

7.Compression low.

7.Contact an authorized service dealer.

Engine

1.Choke partially on.

1.Adjust choke.

smokes

2.Fuel mixture incorrect.

2.Empty fuel tank and refill with

excessively.

 

correct fuel mixture.

3.Air filter dirty.

3.Clean or replace air filter.

 

 

4.Carburetor requires adjustment.

4.Contact an authorized service dealer.

Engine

1.Fuel mixture incorrect.

1.See “Fueling Your Unit.”

runs hot.

2.Spark plug incorrect.

2.Replace with correct spark plug.

 

3.Carburetor requires adjustment.

3.Contact an authorized service dealer.

 

4.Carbon build up.

4.Contact an authorized service dealer.

-- 10 --

Image 10
Contents Manual DE Instrucciones Manuel D’INSTRUCTIONSBetriebsanweisung Libretto D’ISTRUZIONIKnow Your Unit KEY to SymbolsSafety Rules Plan AheadMaintain Your Unit Properly Fuel SafetyOperate Your Unit Safely Hol, drugs, or medicationCarton Contents What is WHAT?Assembly AssemblyVacuum Tube Assembly HIGH-SPEED Nozzle AssemblyVacuum BAG Assembly OutletShoulder Strap Adjustment HOW to Convert Unit from Vacuum USE to Blower USELower Upper Operation Maintenance Replace Fuel Filter Carburetor AdjustmentsReplace Spark Plug Check Muffler Mounting ScrewsOther Troubleshooting Table Cause RemedyInternal Engine External SurfacesDeclaration of Conformity COUNCIL’S DirectivesIgnition System WeightEngine Fuel and Librication System