Troubleshooting

If you have any trouble using the AV receiver, look for a solution in this section. If you can’t resolve the issue yourself, contact your Onkyo dealer.

If you can’t resolve the issue yourself, try resetting the AV receiver before contacting your Onkyo dealer.

To reset the AV receiver to its factory defaults, turn it on and, while holding down the [VCR/DVR] button, press the [ON/STANDBY] button. “Clear” will appear on the display and the AV receiver will enter Standby mode.

Note that resetting the AV receiver will delete your radio presets and custom settings.

Power

Can’t turn on the AV receiver

•Make sure that the power cord is plugged into the wall outlet properly.

•Unplug the power cord from the wall outlet, wait 5 seconds or more, then plug it back in again.

The AV receiver turns off as soon as it’s turned on

•The amp protection circuit has been activated. Remove the power cord from the wall outlet immediately. Disconnect all speaker cables and input sources, and leave the AV receiver with its power cord disconnected for 1 hour. After that, reconnect the power cord and set the volume to maximum. If the AV receiver stays on, set the volume to minimum, disconnect the power cord, and reconnect your speakers and input sources. If the AV receiver turns off when you set the volume to maximum, disconnect the power cord, and contact your Onkyo dealer.

Audio

There’s no sound or it’s very quiet

•To listen to an audio source that’s connected to an HDMI input, make sure that input is assigned to an input selector (page 41).

•To listen to an audio source that’s connected to an OPTICAL or COAXIAL input, make sure that input is assigned to an input selector (page 43).

•Make sure that all audio connecting plugs are pushed in all the way (page 25).

•Make sure that the polarity of the speaker cables is correct, and that the bare wire is in contact with the metal part of each speaker terminal (page 19).

•Make sure that the speaker cables are not shorting.

•Check the volume (page 49). The AV receiver is designed for home theater enjoyment and has a wide volume range for precise adjustment.

•If the MUTING indicator is flashing on the display, press the remote controller’s [MUTING] button to unmute the AV receiver (page 51).

•While a pair of headphones is connected to the PHONES jack, no sound is output by the speakers (page 51).

•Check the digital audio output settings on the source component. On some game consoles, such as those that can play DVDs, the default setting is off.

•With some DVD-Video discs, you need to select an audio format from a menu or with the [AUDIO] button on your DVD player’s remote controller.

•If your turntable doesn’t have a phono preamp built-in, you must connect one between it and the AV receiver.

•If your turntable uses an MC cartridge, you must connect an MC head amp, or an MC transformer and a phono preamp.

•Check the speaker settings (pages 68–70).

•If the digital signal format is set to PCM or DTS, set it to “Auto” (page 52).

•If there’s no sound from a DVD player connected to an HDMI IN, check the DVD player’s output settings, and be sure to select a compatible audio format.

Only the front speakers produce sound

•When the Stereo or Mono listening mode is selected, only the front speakers and subwoofer produce sound.

•Check the “2-2. Sp Config (Speaker Configuration)” (page 68).

Only the center speaker produces sound

•If you use the Dolby Pro Logic IIx Movie or Dolby Pro Logic IIx Music listening mode with a mono source, such as an AM radio station or mono TV program, the sound will be concentrated in the center speaker.

•Check the “2-2. Sp Config (Speaker Configuration)” (page 68).

The center speaker produces no sound

•When the Stereo or Mono listening mode is selected, the center speaker produces no sound (page 66).

•Check the “2-2. Sp Config (Speaker Configuration)” (page 68).

The surround speakers produce no sound

•When the T-D (Theater-Dimensional), Stereo or Mono listening mode is selected, the surround speakers produce no sound.

•Depending on the source and the current listening mode, not much sound may be produced by the surround speakers. Try another listening mode (page 61).

•Check the “2-2. Sp Config (Speaker Configuration)” (page 68).

93

Page 92 Page 94
Page 93
Image 93
Onkyo HT-S6200, 29344937 instruction manual Troubleshooting
Page 92 Page 94

HT-S6200, 29344937 specifications

The Onkyo HT-S6200 is a versatile and powerful home theater system that delivers an impressive audio experience for music and movie enthusiasts alike. One of its standout features is the 7.1-channel surround sound configuration, which creates an immersive sound environment, enveloping listeners with crystal-clear audio. This configuration is especially effective in large rooms, providing an enveloping sound that enhances the viewing experience for everything from action-packed movies to nuanced dramas.

The system includes a powerful AV receiver, model TX-SR313, boasting a variety of connectivity options. With six HDMI inputs, it allows users to connect multiple devices such as Blu-ray players, gaming consoles, and streaming devices easily. The receiver supports 4K video pass-through, making it future-proof for high-definition content and ideal for users looking to enjoy the latest in home entertainment.

Another key aspect of the HT-S6200 is its implementation of Dolby TrueHD and DTS-HD Master Audio technologies. These formats deliver lossless audio, ensuring that soundtracks and sound effects are reproduced with stunning fidelity, replicating a cinema-like experience at home. Furthermore, the system features Dolby Pro Logic IIz, which enhances the surround sound experience by creating an additional layer of depth through front height channels.

The Onkyo HT-S6200 also integrates a user-friendly graphical user interface, making setup and operation straightforward. High-quality speaker components, including a powered subwoofer with a 12-inch driver, produce deep, powerful bass, providing an excellent anchor for the overall sound stage. The satellite speakers are designed to deliver clear midrange and high frequencies, ensuring every dialogue and musical note is distinct and engaging.

With its elegant design, the HT-S6200 fits seamlessly into any home décor, while also providing robust performance. The system also supports Onkyo’s exclusive AccuEQ room acoustic calibration technology, which automatically adjusts the sound settings to suit the specific acoustics of a room. This feature enhances the listening experience by optimizing audio playback according to the user’s environment.

In summary, the Onkyo HT-S6200 combines advanced audio technologies, versatile connectivity options, and user-friendly features to create a compelling home theater system. Whether enjoying a thrilling movie night or listening to music, this system promises to elevate any audio experience, making it a worthy investment for any home entertainment enthusiast.
Top Page Image Contents