Onkyo 29344937 Using Zone, Controlling Zone 2 from the AV receiver, Zone 2—Continued, Notes

Zone 2—Continued

Using Zone 2

This section explains how to turn Zone 2 on and off, how to select an input source for Zone 2, and how to adjust the volume for Zone 2.

Controlling Zone 2 from the AV receiver

ZONE 2 OFF

ZONE 2 indicator Input selector

1	To turn on Zone 2 and select an
	input source, press the [ZONE 2]
	button followed by an input
	selector button within 8 seconds.
	Zone 2 turns on and ZONE 2 indicator
	lights up.
	To select the same source as that of the
	main room, press the [ZONE 2] button
	repeatedly until “Z2 Sel: Source”
	appears.
	To select AM or FM press the
	[TUNER] input selector button
	repeatedly.
	Note:
	You cannot select different AM or FM
	radio stations for your main room,
	Zone 2. The same AM/FM radio station
2	will be heard in each room.
	To turn off Zone 2, press the
	ZONE 2 [OFF] button.

Notes:

•Only analog input sources are output by Zone 2. Digital input sources are not output. If no sound is heard when an input source is selected, check to make sure it’s connected to an analog input.

•While Zone 2 is on, the Auto Power On/Standby and Direct Change ufunctions do not work.

•While Powered Zone 2 is being used, listening modes that require surround back or front high speakers (6.1/7.1), such as Dolby Digital EX, DTS-ES and Dolby Pro Logic IIz Height are unavailable.

•When the “Powered Zone 2” setting is set to “Act” and the input selector of Zone 2 is selected, power consumption on standby mode slightly increases.

Controlling Zone 2 with the Remote Controller

ON/STANDBY	ZONE2
INPUT
SELECTOR

Note:

To control Zone 2, you must press the remote controller’s [ZONE 2] button first.

1	Press the [ZONE 2] button, then
	point the remote controller at the
	AV receiver and press the
	[ON/STANDBY] button.
	Zone 2 turns on and ZONE 2 indicator
	lights up.

2	To select an input source for
	Zone 2, press the [ZONE 2]
	button, followed by an INPUT
	SELECTOR button.

To select AM or FM press the [TUNER] INPUT SELECTOR button repeatedly.

Note:

You cannot select different AM or FM radio stations for your main room, Zone 2. The same AM/FM radio station will be heard in each room.

3 To turn off Zone 2, press the

[ZONE 2] button, followed by the [ON/STANDBY] button.

82